https://bugzilla.novell.com/show_bug.cgi?id=332316
User gabotrotamundos@gmail.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=332316#c20
--- Comment #20 from Gabriel Moreno 2007-12-10 19:15:28 MST ---
this is my bootlog when I run the DVD without broken modules = pata_amd
<5>Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE
Linux)) #1 SMP 2007/09/21 22:29:00 UTC
<6>Command line: BOOT_IMAGE=linux initrd=initrd,10240768.spl splash=silent
vga=0x317
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
<4> BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003bf50000 (usable)
<4> BIOS-e820: 000000003bf50000 - 000000003bf65000 (ACPI data)
<4> BIOS-e820: 000000003bf65000 - 000000003bf66000 (ACPI NVS)
<4> BIOS-e820: 000000003bf66000 - 0000000040000000 (reserved)
<4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<7>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
<7>Entering add_active_range(0, 256, 245584) 1 entries of 3200 used
<4>end_pfn_map = 1048576
<6>DMI present.
<4>ACPI: RSDP 000F8250, 0024 (r2 PTLTD )
<4>ACPI: XSDT 3BF5C5E6, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
<4>ACPI: FACP 3BF649BA, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240)
<4>ACPI: DSDT 3BF5C652, 82F4 (r1 NVIDIA MCP67 6040000 MSFT 3000000)
<4>ACPI: FACS 3BF65FC0, 0040
<4>ACPI: TCPA 3BF64AAE, 0032 (r1 Phoeni x 6040000 TL 0)
<4>ACPI: SRAT 3BF64AE0, 00A0 (r1 AMD HAMMER 6040000 AMD 1)
<4>ACPI: SSDT 3BF64B80, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1)
<4>ACPI: MCFG 3BF64D86, 003C (r1 PTLTD MCFG 6040000 LTP 0)
<4>ACPI: HPET 3BF64DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
<4>ACPI: APIC 3BF64DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0)
<4>ACPI: BOOT 3BF64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
<4>ACPI: SLIC 3BF64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
<6>SRAT: PXM 0 -> APIC 0 -> Node 0
<6>SRAT: PXM 0 -> APIC 1 -> Node 0
<6>SRAT: Node 0 PXM 0 0-a0000
<7>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
<6>SRAT: Node 0 PXM 0 0-40000000
<7>Entering add_active_range(0, 0, 158) 1 entries of 3200 used
<7>Entering add_active_range(0, 256, 245584) 1 entries of 3200 used
<7>NUMA: Using 63 for the hash shift.
<6>Bootmem setup node 0 0000000000000000-000000003bf50000
<4>Zone PFN ranges:
<4> DMA 0 -> 4096
<4> DMA32 4096 -> 1048576
<4> Normal 1048576 -> 1048576
<4>early_node_map[2] active PFN ranges
<4> 0: 0 -> 158
<4> 0: 256 -> 245584
<7>On node 0 totalpages: 245486
<7> DMA zone: 56 pages used for memmap
<7> DMA zone: 1270 pages reserved
<7> DMA zone: 2672 pages, LIFO batch:0
<7> DMA32 zone: 3301 pages used for memmap
<7> DMA32 zone: 238187 pages, LIFO batch:31
<7> Normal zone: 0 pages used for memmap
<6>ACPI: PM-Timer IO Port: 0x1008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>Processor #0 (Bootup-CPU)
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<6>Processor #1
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<6>Setting APIC routing to flat
<6>ACPI: HPET id: 0x10de8201 base: 0xfed00000
<6>Using ACPI (MADT) for SMP configuration information
<4>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
<4>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
<4>swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
<6>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
<6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
<6>PERCPU: Allocating 50296 bytes of per cpu data
<4>Built 1 zonelists. Total pages: 240859
<5>Kernel command line: BOOT_IMAGE=linux initrd=initrd,10240768.spl
splash=silent vga=0x317
<6>bootsplash: silent mode.
<4>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 32768 bytes)
<6>Extended CMOS year: 2000
<4>Marking TSC unstable due to TSCs unsynchronized
<6>time.c: Detected 1900.177 MHz processor.
<4>Console: colour dummy device 80x25
<4>Checking aperture...
<4>CPU 0: aperture @ 9c80000000 size 32 MB
<4>Aperture too small (32 MB)
<4>No AGP bridge found
<4>Memory: 948144k/982336k available (2050k kernel code, 33800k reserved, 1017k
data, 316k init)
<4>Calibrating delay using timer specific routine.. 3804.15 BogoMIPS
(lpj=7608318)
<6>Security Framework v1.0.0 initialized
<4>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>Mount-cache hash table entries: 256
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 0/0 -> Node 0
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<6>SMP alternatives: switching to UP code
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 15090k freed
<6>ACPI: Core revision 20070126
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 890 Objects with 89 Devices 278 Methods 34 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
<4> tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable : Transition to ACPI mode
successful
<6>Using local APIC timer interrupts.
<4>result 12501166
<6>Detected 12.501 MHz APIC timer.
<6>SMP alternatives: switching to SMP code
<6>Booting processor 1/2 APIC 0x1
<4>Initializing CPU#1
<4>Calibrating delay using timer specific routine.. 3800.38 BogoMIPS
(lpj=7600777)
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 1/1 -> Node 0
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 1
<4>AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 01
<6>Brought up 2 CPUs
<4>migration_cost=231
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: Using MMCONFIG at e0000000 - e04fffff
<5>PCI: No mmconfig possible on device 00:18
<4>evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int
0x9
<4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 2 Runtime
GPEs in this block
<4>Completing Region/Field/Buffer/Package
initialization:.................................................................................................................
<4>Initialized 34/34 Regions 6/6 Fields 45/45 Buffers 28/43 Packages (907
nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI
methods:<4>ACPI: System BIOS is requesting _OSI(Linux)
<4>ACPI: Please test with "acpi_osi=!Linux"
<4>Please send dmidecode to linux-acpi@vger.kernel.org
<4>.
<4>Executed 1 _INI methods requiring 1 _STA executions (examined 96 objects)
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<6>PCI: Transparent bridge - 0000:00:08.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10
<4>ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
<4>ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
<4>ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
<4>ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
<4>ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
<4>ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
<4>ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
<4>ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
<4>ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
<4>ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
<4>ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10
<4>ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10
<4>ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11
<4>ACPI: PCI Interrupt Link [Z015] (IRQs 18) *5
<4>ACPI: PCI Interrupt Link [Z016] (IRQs 22) *10
<4>ACPI: PCI Interrupt Link [LPMU] (IRQs *11)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 12 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
<6>hpet0: 3 32-bit timers, 25000000 Hz
<4>ACPI: RTC can wake from S4
<6>Time: hpet clocksource has been installed.
<6>pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
<6>pnp: 00:03: ioport range 0x1000-0x107f has been reserved
<6>pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
<6>pnp: 00:03: ioport range 0x1400-0x147f has been reserved
<6>pnp: 00:03: ioport range 0x1480-0x14ff has been reserved
<6>pnp: 00:03: ioport range 0x1800-0x187f has been reserved
<6>pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
<6>pnp: 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved
<6>pnp: 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
<6>pnp: 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
<6>pnp: 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
<6>PCI: Bridge: 0000:00:08.0
<6> IO window: disabled.
<6> MEM window: f6100000-f61fffff
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:0c.0
<6> IO window: 4000-4fff
<6> MEM window: f2000000-f3ffffff
<6> PREFETCH window: f0000000-f1ffffff
<6>PCI: Bridge: 0000:00:0d.0
<6> IO window: disabled.
<6> MEM window: f6000000-f60fffff
<6> PREFETCH window: disabled.
<7>PCI: Setting latency timer of device 0000:00:08.0 to 64
<7>PCI: Setting latency timer of device 0000:00:0c.0 to 64
<7>PCI: Setting latency timer of device 0000:00:0d.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
<4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>Simple Boot Flag at 0x36 set to 0x1
<6>audit: initializing netlink socket (disabled)
<5>audit(1197403370.840:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>Boot video device is 0000:00:12.0
<7>PCI: Setting latency timer of device 0000:00:0c.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:0c.0:pcie00]
<7>Allocate Port Service[0000:00:0c.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:0d.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:0d.0:pcie00]
<7>Allocate Port Service[0000:00:0d.0:pcie03]
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000b80000, using
6144k, total 65536k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=1
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 78436 bytes
<6>bootsplash: ...found (1024x768, 28133 bytes, v3).
<4>Console: switching to colour frame buffer device 124x44
<6>fb0: VESA VGA frame buffer device
<6>Real Time Clock Driver v1.12ac
<7>hpet_resources: 0xfed00000 is busy
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.102 (c) Dave Jones
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
<6>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>input: AT Translated Set 2 keyboard as /class/input/input0
<6>input: PC Speaker as /class/input/input1
<6>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
<6>input: SynPS/2 Synaptics TouchPad as /class/input/input2
<6>NET: Registered protocol family 1
<6>Freeing unused kernel memory: 316k freed
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<5>SCSI subsystem initialized
<6>st: Version 20070203, fixed bufsize 32768, s/g segs 256
<6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<6>NET: Registered protocol family 17
<6>loop: module loaded
<6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
<6>ACPI: Processor [CPU0] (supports 8 throttling states)
<4>ACPI Exception (processor_core-0787): AE_NOT_FOUND, Processor Device is not
present [20070126]
<4>ACPI Exception (processor_core-0787): AE_NOT_FOUND, Processor Device is not
present [20070126]
<4>ACPI Exception (thermal-0317): AE_BAD_DATA, No critical threshold [20070126]
<6>powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-58 processors
(version 2.00.00)
<6>powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x11
<6>powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12
<6>powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x13
<6>powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
<7>libata version 3.00 loaded.
<7>pata_amd 0000:00:06.0: version 0.3.8
<7>PCI: Setting latency timer of device 0000:00:06.0 to 64
<6>scsi0 : pata_amd
<6>scsi1 : pata_amd
<6>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma
0x00000000000130c0 irq 14
<6>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma
0x00000000000130c8 irq 15
<6>ata1.00: ATAPI: Optiarc DVD RW AD-7561A, GH09, max MWDMA2
<6>ata1.00: configured for MWDMA2
<7>ata2: port disabled. ignoring.
<5>scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7561A GH09 PQ: 0 ANSI: 5
<4>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 0:0:0:0: Attached scsi CD-ROM sr0
<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
<7>ahci 0000:00:09.0: version 3.0
<4>ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
<6>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) ->
IRQ 23
<6>ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
<6>ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
<7>PCI: Setting latency timer of device 0000:00:09.0 to 64
<6>scsi2 : ahci
<6>scsi3 : ahci
<6>scsi4 : ahci
<6>scsi5 : ahci
<6>ata3: SATA max UDMA/133 cmd 0xffffc20000b04100 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 4349
<6>ata4: SATA max UDMA/133 cmd 0xffffc20000b04180 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 4349
<6>ata5: SATA max UDMA/133 cmd 0xffffc20000b04200 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 4349
<6>ata6: SATA max UDMA/133 cmd 0xffffc20000b04280 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 4349
<6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata3.00: ATA-7: FUJITSU MHW2160BH PL, 891F, max UDMA/100
<6>ata3.00: 312581808 sectors, multi 16: LBA48
<6>ata3.00: configured for UDMA/100
<6>ata4: SATA link down (SStatus 0 SControl 300)
<6>ata5: SATA link down (SStatus 0 SControl 300)
<6>ata6: SATA link down (SStatus 0 SControl 300)
<5>scsi 2:0:0:0: Direct-Access ATA FUJITSU MHW2160B 891F PQ: 0 ANSI: 5
<5>sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
<5>sd 2:0:0:0: [sda] Write Protect is off
<7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<5>sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
<5>sd 2:0:0:0: [sda] Write Protect is off
<7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<6> sda: sda1 sda2
<5>sd 2:0:0:0: [sda] Attached SCSI disk
<5>sd 2:0:0:0: Attached scsi generic sg1 type 0
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<4>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
<6>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) ->
IRQ 22
<7>PCI: Setting latency timer of device 0000:00:02.1 to 64
<6>ehci_hcd 0000:00:02.1: EHCI Host Controller
<6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:02.1: debug port 1
<7>PCI: cache line size of 64 is not supported by device 0000:00:02.1
<6>ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
<6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: EHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd
<6>usb usb1: SerialNumber: 0000:00:02.1
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 7 ports detected
<4>ACPI: PCI Interrupt Link [Z016] enabled at IRQ 22
<6>ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z016] -> GSI 22 (level, low) ->
IRQ 22
<7>PCI: Setting latency timer of device 0000:00:04.1 to 64
<6>ehci_hcd 0000:00:04.1: EHCI Host Controller
<6>ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
<6>ehci_hcd 0000:00:04.1: debug port 1
<7>PCI: cache line size of 64 is not supported by device 0000:00:04.1
<6>ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400
<6>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: EHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd
<6>usb usb2: SerialNumber: 0000:00:04.1
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usb 1-2: new high speed USB device using ehci_hcd and address 2
<6>usb 1-2: new device found, idVendor=0951, idProduct=1605
<6>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 1-2: Product: DataTravelerMini
<6>usb 1-2: Manufacturer: Kingston
<6>usb 1-2: SerialNumber: 5B7705000507
<6>usb 1-2: configuration #1 chosen from 1 choice
<6>usb 2-2: new high speed USB device using ehci_hcd and address 2
<6>usb 2-2: new device found, idVendor=064e, idProduct=a110
<6>usb 2-2: new device strings: Mfr=2, Product=1, SerialNumber=3
<6>usb 2-2: Product: HP Webcam
<6>usb 2-2: Manufacturer: SuYin
<6>usb 2-2: SerialNumber: CN0314-MI01-VH-R03.01.01
<6>usb 2-2: configuration #1 chosen from 1 choice
<6>usbcore: registered new interface driver hiddev
<6>usbcore: registered new interface driver usbhid
<6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
<4>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
<6>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 18 (level, low) ->
IRQ 18
<7>PCI: Setting latency timer of device 0000:00:02.0 to 64
<6>ohci_hcd 0000:00:02.0: OHCI Host Controller
<6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
<6>ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000
<6>usb usb3: new device found, idVendor=0000, idProduct=0000
<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: OHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.22.5-31-default ohci_hcd
<6>usb usb3: SerialNumber: 0000:00:02.0
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 7 ports detected
<4>ACPI: PCI Interrupt Link [Z015] enabled at IRQ 18
<6>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z015] -> GSI 18 (level, low) ->
IRQ 18
<7>PCI: Setting latency timer of device 0000:00:04.0 to 64
<6>ohci_hcd 0000:00:04.0: OHCI Host Controller
<6>ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
<6>ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000
<6>usb usb4: new device found, idVendor=0000, idProduct=0000
<6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: OHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.22.5-31-default ohci_hcd
<6>usb usb4: SerialNumber: 0000:00:04.0
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>usb 3-7: new full speed USB device using ohci_hcd and address 2
<6>usb 3-7: new device found, idVendor=08ff, idProduct=2580
<6>usb 3-7: new device strings: Mfr=0, Product=1, SerialNumber=0
<6>usb 3-7: Product: Fingerprint Sensor
<6>usb 3-7: configuration #1 chosen from 1 choice
<6>Initializing USB Mass Storage driver...
<6>scsi6 : SCSI emulation for USB Mass Storage devices
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<5>scsi 6:0:0:0: Direct-Access Kingston DataTravelerMini PMAP PQ: 0 ANSI: 0
CCS
<5>sd 6:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
<5>sd 6:0:0:0: [sdb] Write Protect is off
<7>sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
<3>sd 6:0:0:0: [sdb] Assuming drive cache: write through
<5>sd 6:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
<5>sd 6:0:0:0: [sdb] Write Protect is off
<7>sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
<3>sd 6:0:0:0: [sdb] Assuming drive cache: write through
<6> sdb: sdb1
<5>sd 6:0:0:0: [sdb] Attached SCSI removable disk
<5>sd 6:0:0:0: Attached scsi generic sg2 type 0
<7>usb-storage: device scan complete
<4>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
<6>ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK1] -> GSI 5 (level, low) ->
IRQ 5
<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff]
Max Packet=[2048] IR/IT contexts=[4/4]
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00a33b7e00]
<6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
<4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 20 (level, low) ->
IRQ 20
<7>PCI: Setting latency timer of device 0000:00:0a.0 to 64
<6>forcedeth: using HIGHDMA
<3>0000:00:0a.0: Invalid Mac address detected: 75:cc:c9:24:1b:00
<3>Please complain to your hardware vendor. Switching to a random MAC.
<6>eth0: forcedeth.c: subsystem: 0103c:30cf bound to 0000:00:0a.0
<7>ieee80211_crypt: registered algorithm 'NULL'
<6>ieee80211: 802.11 data/management/control stack, git-1.1.13
<6>ieee80211: Copyright (C) 2004-2005 Intel Corporation
<6>bcm43xx driver
<4>ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
<6>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) ->
IRQ 19
<7>PCI: Setting latency timer of device 0000:03:00.0 to 64
<6>bcm43xx: Chip ID 0x4311, rev 0x1
<6>bcm43xx: Number of cores: 4
<6>bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
<6>bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
<6>bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
<6>bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
<6>bcm43xx: PHY connected
<6>bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
<6>bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
<6>bcm43xx: Radio turned off
<6>bcm43xx: Radio turned off
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<7>ISO 9660 Extensions: RRIP_1991A
<6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.