[Bug 1037344] New: no wifi with driver bcma
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344 Bug ID: 1037344 Summary: no wifi with driver bcma Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.3 Hardware: 64bit OS: openSUSE 42.2 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel Assignee: kernel-maintainers@forge.provo.novell.com Reporter: gerard@rmsb.u-bordeaux2.fr QA Contact: qa-bugs@suse.de Found By: --- Blocker: --- Created attachment 723576 --> http://bugzilla.opensuse.org/attachment.cgi?id=723576&action=edit hwinfo hi, After an update the wifi is no longer functional. Dmesg reporting : [ 2.598320] bcma: bus0: Found chip with id 43228, rev 0x00 and package 0x08 [ 2.598359] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 2.598389] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0) [ 2.598452] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0) [ 2.598483] bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0) [ 2.617573] bcma: bus0: Bus registered [ 2.843656] b43-phy0: Broadcom 43228 WLAN found (core revision 30) [ 2.844080] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16 [ 2.844090] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1 [ 2.844625] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2 [ 2.844635] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2 [ 2.844645] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2 [ 2.844653] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2 [ 2.844654] b43-phy0 ERROR: Firmware file "b43/ucode30_mimo.fw" not found [ 2.844655] b43-phy0 ERROR: Firmware file "b43-open/ucode30_mimo.fw" not found [ 2.844655] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 2.844625] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2 [ 2.844635] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2 [ 2.844645] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2 [ 2.844653] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2 extra info : /sbin/lspci | grep 802 25:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n uname -a Linux hp-gr 4.4.62-18.6-default #1 SMP Fri Apr 21 16:14:48 UTC 2017 (84f9824) x86_64 x86_64 x86_64 GNU/Linux best regards -- You are receiving this mail because: You are on the CC list for the bug.
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c1
Andreas Stieger
After an update
Which update? Which version last confirmed to be working? If you boot the previous kernel, does it still work?
b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2 b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2 b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2 b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2 b43-phy0 ERROR: Firmware file "b43/ucode30_mimo.fw" not found b43-phy0 ERROR: Firmware file "b43-open/ucode30_mimo.fw" not found
Do you have these?
b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
Did you do that? -- You are receiving this mail because: You are on the CC list for the bug.
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c2
--- Comment #2 from gerard raffard
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c3
--- Comment #3 from gerard raffard
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c4
Takashi Iwai
hi Andreas Stieger
Which update? the normal software updates.
Well, it's still not clear which you're talking about. You've set the version in this report that it's openSUSE Leap 42.3, not in 42.2. Is it correct? If yes, what update did you apply at all...?
Which version last confirmed to be working? all version before
Before what? This is the most important part. Please check zypper log and which packages have been updated.
If you boot the previous kernel, does it still work? no
It implies that it's no kernel problem. Looking at the log, you're loading b43 module, not brcmfmac. Is this expected and it used to be so? We're willing to help, but your information is way too vague and difficult to analyze. -- You are receiving this mail because: You are on the CC list for the bug.
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c5
--- Comment #5 from Takashi Iwai
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c6
--- Comment #6 from gerard raffard
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c7
--- Comment #7 from gerard raffard
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c8
--- Comment #8 from gerard raffard
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
Andreas Stieger
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c9
--- Comment #9 from Takashi Iwai
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c10
--- Comment #10 from gerard raffard
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c11
Takashi Iwai
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c12
--- Comment #12 from gerard raffard
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c13
--- Comment #13 from Takashi Iwai
Thanks.
Could you check whether b43 module (b43.ko) is found in your initrd? Run lsinitrd.
----you can list lsinitrdgr-------
What do you mean? Run lsinitrd as root, and you'll see the contents of initrd. Do you see b43.ko there? This is the question. -- You are receiving this mail because: You are on the CC list for the bug.
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c14
--- Comment #14 from gerard raffard
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c15
Takashi Iwai
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c16
--- Comment #16 from Daniel Molkentin
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c17
--- Comment #17 from gerard raffard
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c18
--- Comment #18 from gerard raffard
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c32
Takashi Iwai
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
Sergey Koltogyan
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c44
--- Comment #44 from Andrew Bontje
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c45
--- Comment #45 from Andrew Bontje
Please give the packages from the development tree
https://software.opensuse.org//download. html?project=home%3Admolkentin%3Adracut%3Adevel%3Agit&package=dracut
a try. It reverts the new behavior and special cases only certain drivers.
It isn't necessary and not such a good idea to install this package. It will be overwritten with an update of dracut. A better way is to add the file 50-omit-b43-ssb-ssb_hcd.conf in /etc/dracut.d.conf directory. After doing this you need to run mkinitrd and reboot the system. After this you can revert back to the last standard dracut package. When dracut is released without the new behavior and special cases for certain drivers, you can delete the file 50-omit-b43-ssb-ssb_hcd.conf. -- You are receiving this mail because: You are on the CC list for the bug.
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
http://bugzilla.opensuse.org/show_bug.cgi?id=1037344#c46
--- Comment #46 from Andrew Bontje
omit_drivers+="b43 ssb ssb-hcd"
-- You are receiving this mail because: You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply@novell.com