[Bug 373357] New: Error Installing OpenSuse 11 in Sony Vaio VGN A617B
https://bugzilla.novell.com/show_bug.cgi?id=373357 Summary: Error Installing OpenSuse 11 in Sony Vaio VGN A617B Product: openSUSE 11.0 Version: Alpha 2 Platform: x86 OS/Version: openSUSE 11.0 Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: cortijosanroque@hotmail.com QAContact: jsrain@novell.com Found By: Beta-Customer I have a Sony VAIO VGN A617B with Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)and Intel Corporation 82801FBM (ICH6M)SATA Controller but when i´m installing opensuse and i try to formatting hard disk the pc hang on and i can`t continue,i think that this error was in drivers ata_piix,libata or something similar I like to install opensuse but it´s impossible. I need a solution please. I try to send more information copying error in a new instalation though lost all information. Thanks a lot -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 Cyril Hrubis <chrubis@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team-screening@forge.provo.novell.com |kernel-maintainers@forge.provo.novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User coolo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c1 Stephan Kulow <coolo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |WORKSFORME --- Comment #1 from Stephan Kulow <coolo@novell.com> 2008-05-05 13:41:57 MST --- sounds like an old problem, please test with newer beta and reopen if it's still an issue -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c2 Ingo Schulz <infoman@imail.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |infoman@imail.de --- Comment #2 from Ingo Schulz <infoman@imail.de> 2008-06-22 06:12:19 MDT --- i have also the problem with the newest version of opensuse 11. The installation Process freezes. The same problem exists since opensuse 10.2. Opensuse 10.2 didnt recognize my sata drive. 10.3 could be installed, but after the installation, the freezes with the exception emask error occured. A small Solution were the bootoptions "nolapic irqpoll". But with this solution, the vaio vgn a617b was very slow and it was possible that the system "lost" the harddisk. I expected Opensuse 11 to fix this Problem, but the Problem is still alive. :( -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c3 Ingo Schulz <infoman@imail.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|WORKSFORME | Version|Alpha 2 |Final --- Comment #3 from Ingo Schulz <infoman@imail.de> 2008-06-22 06:14:42 MDT --- (In reply to comment #0 from miguel angel martinez garcia)
I have a Sony VAIO VGN A617B with Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)and Intel Corporation 82801FBM (ICH6M)SATA Controller but when i´m installing opensuse and i try to formatting hard disk the pc hang on and i can`t continue,i think that this error was in drivers ata_piix,libata or something similar
I like to install opensuse but it´s impossible.
I need a solution please.
I try to send more information copying error in a new instalation though lost all information.
Thanks a lot
-- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User hkdman66@yahoo.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c4 Stephen Thomas <hkdman66@yahoo.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |hkdman66@yahoo.com --- Comment #4 from Stephen Thomas <hkdman66@yahoo.com> 2008-06-22 17:23:41 MDT --- I also have this problem. I have had success with other Linux Distros. Yet, OpenSuse 11.0 has an issue with my sata drive. Please help. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 Lars Marowsky-Bree <lmb@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|kernel-maintainers@forge.provo.novell.com |teheo@novell.com Status|REOPENED |NEW -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User teheo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c5 Tejun Heo <teheo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED --- Comment #5 from Tejun Heo <teheo@novell.com> 2008-07-07 06:48:59 MDT --- Miguel, Ingo, Stephen, are you guys all using Sony Vaio VGN A617B? Does irqpoll alone fix the problem? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User cortijosanroque@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c6 --- Comment #6 from miguel angel martinez garcia <cortijosanroque@hotmail.com> 2008-07-10 13:29:03 MDT --- Created an attachment (id=227085) --> (https://bugzilla.novell.com/attachment.cgi?id=227085) Error Installing OpenSuse 11 in Sony Vaio VGN A617B the problem continues in opensuse 11 I think that the problem is in the sata or ata driver because when I use live version, at the start recognize all the system and I can work with hard disk very quickly but when i try to install the instalation hang up the system. ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: softreset failed (device not ready) ata2: softreset failed, retrying in 5 secs ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: COMRESET failed (device not ready) ata2: reset failed, giving up -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User teheo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c7 Tejun Heo <teheo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |cortijosanroque@hotmail.com --- Comment #7 from Tejun Heo <teheo@novell.com> 2008-07-18 07:48:00 MDT --- So, you can access the harddisk from openSUSE 11.0 live CD but not when you're installing? That's strange as both cases use the same driver. It's more likely the drive checks out when subjected to heavy load. Can you please do the followings after booting with a live CD? 1. Post the result of "lspci -nn" 2. Post the result of "hdparm -I /dev/sda" 3. Post /var/log/boot.msg 4. Run "mkfs.ext3 /dev/sdaX" as root and see whether it causes the reported problem. Note that the command will destroy the specified partition. 5. If the problem occurs, post the result of "dmesg". Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User teheo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c8 --- Comment #8 from Tejun Heo <teheo@novell.com> 2008-07-18 07:48:58 MDT --- Ingo, Stephen, can you guys please confirm what machines you encountered the problem on? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c9 --- Comment #9 from Ingo Schulz <infoman@imail.de> 2008-07-18 08:09:32 MDT --- Hi Tejun, my PC is a Sony VGN A617B. IRQPOLL alone doesnt fix the Problem. "NOLAPIC" ist additionaly obligatory. But the System ist very slow with this Options. Next I'll try your 5 suggested Points. I'll report in the next few Days, because I'm very busy. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c10 --- Comment #10 from Ingo Schulz <infoman@imail.de> 2008-08-03 08:41:13 MDT --- So, i executed the suggested tasks. Here are my logs: 1. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M24 1P [Radeon Mobility X600] [1002:3150] 02:01.0 CardBus bridge [0607]: Texas Instruments PCI7420 CardBus Controller [104c:ac8e] 02:01.2 FireWire (IEEE 1394) [0c00]: Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller [104c:802e] 02:01.3 Mass storage controller [0180]: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller [104c:ac8f] 02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG Network Connection [8086:4220] (rev 05) 02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) 2. hdparm -I /dev/sda /dev/sda: ATA device, with non-removable media Model Number: HTS541080G9SA00 Serial Number: MPBDL0X6JM9ZYM Firmware Revision: MB4OC60D Standards: Used: ATA/ATAPI-7 T13 1532D revision 1 Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 156301488 LBA48 user addressable sectors: 156301488 device size with M = 1024*1024: 76319 MBytes device size with M = 1000*1000: 80026 MBytes (80 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Vendor, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 128 Recommended acoustic management value: 128, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension * Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * WRITE_{DMA|MULTIPLE}_FUA_EXT * SATA-I signaling speed (1.5Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management Non-Zero buffer offsets in DMA Setup FIS DMA Setup Auto-Activate optimization * Device-initiated interface power management In-order data delivery * Software settings preservation Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count not supported: enhanced erase 52min for SECURITY ERASE UNIT. Checksum: correct 3. /var/log/boot.msg Inspecting /boot/System.map-2.6.25.5-1.1-default Loaded 28387 symbols from /boot/System.map-2.6.25.5-1.1-default. Symbols match kernel version 2.6.25. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <5>Linux version 2.6.25.5-1.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-06-07 01:55:22 +0200 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) <4> BIOS-e820: 000000003ffc0000 - 000000003ffcf000 (ACPI data) <4> BIOS-e820: 000000003ffcf000 - 0000000040000000 (ACPI NVS) <4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) <4> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) <4> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) <4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) <5>127MB HIGHMEM available. <5>896MB LOWMEM available. <6>Scan SMP from c0000000 for 1024 bytes. <6>Scan SMP from c009fc00 for 1024 bytes. <6>Scan SMP from c00f0000 for 65536 bytes. <6>found SMP MP-table at [c00ff780] 000ff780 <7>Entering add_active_range(0, 0, 262080) 0 entries of 256 used <4>Zone PFN ranges: <4> DMA 0 -> 4096 <4> Normal 4096 -> 229376 <4> HighMem 229376 -> 262080 <4>Movable zone start PFN for each node <4>early_node_map[1] active PFN ranges <4> 0: 0 -> 262080 <7>On node 0 totalpages: 262080 <7> DMA zone: 32 pages used for memmap <7> DMA zone: 0 pages reserved <7> DMA zone: 4064 pages, LIFO batch:0 <7> Normal zone: 1760 pages used for memmap <7> Normal zone: 223520 pages, LIFO batch:31 <7> HighMem zone: 255 pages used for memmap <7> HighMem zone: 32449 pages, LIFO batch:7 <7> Movable zone: 0 pages used for memmap <6>DMI 2.3 present. <6>Using APIC driver default <4>ACPI: RSDP 000F6910, 0014 (r0 SONY ) <4>ACPI: RSDT 3FFC0000, 0038 (r1 SONY F2 20051222 MSFT 97) <4>ACPI: FACP 3FFC0200, 0084 (r2 SONY F2 20051222 MSFT 97) <4>ACPI: DSDT 3FFC0470, 54A7 (r1 SONY F2 20051222 INTL 2002026) <4>ACPI: FACS 3FFCF000, 0040 <4>ACPI: APIC 3FFC0390, 0054 (r1 SONY F2 20051222 MSFT 97) <4>ACPI: MCFG 3FFC03F0, 003C (r1 SONY F2 20051222 MSFT 97) <4>ACPI: OEMB 3FFCF040, 0040 (r1 SONY F2 20051222 MSFT 97) <4>ACPI: SSDT 3FFC5920, 02B7 (r1 SONY F2 20051222 INTL 2002026) <5>ACPI: DMI detected: Sony <6>ACPI: PM-Timer IO Port: 0x808 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <4>Processor #0 6:13 APIC version 20 <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) <4>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <6>Using ACPI (MADT) for SMP configuration information <4>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) <6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 <6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 <6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260033 <5>Kernel command line: BOOT_IMAGE=linux initrd=initrd,10240768.spl ramdisk_size=512000 ramdisk_blocksize=4096 splash=silent vga=0x317 <6>bootsplash: silent mode. <7>mapped APIC to ffffb000 (fee00000) <7>mapped IOAPIC to ffffa000 (fec00000) <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 16384 bytes) <4>Detected 1729.066 MHz processor. <4>Console: colour dummy device 80x25 <6>console [tty0] enabled <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 1021508k/1048320k available (1945k kernel code, 26204k reserved, 1629k data, 256k init, 130816k highmem) <6>virtual kernel memory layout: <4> fixmap : 0xffdf2000 - 0xfffff000 (2100 kB) <4> pkmap : 0xff400000 - 0xff800000 (4096 kB) <4> vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) <4> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) <4> .init : 0xc0485000 - 0xc04c5000 ( 256 kB) <4> .data : 0xc02e64dd - 0xc047d96c (1629 kB) <4> .text : 0xc0100000 - 0xc02e64dd (1945 kB) <6>Checking if this processor honours the WP bit even in supervisor mode...Ok. <7>CPA: page pool initialized 1 of 1 pages preallocated <4>Calibrating delay using timer specific routine.. 3461.46 BogoMIPS (lpj=6922928) <6>Security Framework initialized <6>AppArmor: AppArmor initialized <NULL> <6>AppArmor: Registered secondary security module capability <6>Capability LSM initialized as secondary <4>Mount-cache hash table entries: 512 <6>CPU: L1 I cache: 32K, L1 D cache: 32K <6>CPU: L2 cache: 2048K <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <4>Compat vDSO mapped to ffffe000. <6>Checking 'hlt' instruction... OK. <6>SMP alternatives: switching to UP code <6>Freeing SMP alternatives: 18k freed <6>ACPI: Core revision 20070126 <6>ACPI: Checking initramfs for custom DSDT <4>Parsing all Control Methods: <4>Table [DSDT](id 0001) - 872 Objects with 60 Devices 208 Methods 28 Regions <4>Parsing all Control Methods: <4>Table [SSDT](id 0002) - 8 Objects with 0 Devices 3 Methods 0 Regions <4> tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired <4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful <4>CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 <6>Total of 1 processors activated (3461.46 BogoMIPS). <4>ENABLING IO-APIC IRQs <6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>Brought up 1 CPUs <7>CPU0 attaching sched-domain: <7> domain 0: span 00000001 <7> groups: 00000001 <6>net_namespace: 548 bytes <6>Booting paravirtualized kernel on bare hardware <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: Using MMCONFIG for extended config space <6>PCI: Using configuration type 1 <6>Setting up standard PCI resources <4>evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 <4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block <7>ACPI: EC: Look up EC in DSDT <4>Completing Region/Field/Buffer/Package initialization:..................................................................................................................... <4>Initialized 27/28 Regions 23/23 Fields 44/45 Buffers 23/26 Packages (889 nodes) <4>Initializing Device/Processor/Thermal objects by executing _INI methods:.. <4>Executed 2 _INI methods requiring 1 _STA executions (examined 64 objects) <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S3 S4 S5) <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: EC: non-query interrupt received, switching to interrupt mode <6>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 <6>ACPI: EC: driver started in interrupt mode <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 <6>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO <6>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO <6>PCI: Transparent bridge - 0000:00:1e.0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] <6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11) <6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7) <6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7) <6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7) <6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7) <6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7) <6>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7) <4>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 9B, should be 93 [20070126] <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>ACPI: bus type pnp registered <6>pnp: PnP ACPI: found 15 devices <6>ACPI: ACPI bus type pnp unregistered <6>PnPBIOS: Disabled by ACPI PNP <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <7>hpet clockevent registered <6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 <6>hpet0: 3 64-bit timers, 14318180 Hz <6>AppArmor: AppArmor Filesystem Enabled <4>ACPI: RTC can wake from S4 <6>system 00:07: ioport range 0x4d0-0x4d1 has been reserved <6>system 00:07: ioport range 0x800-0x87f has been reserved <6>system 00:07: ioport range 0x480-0x4bf has been reserved <6>system 00:07: ioport range 0xfe00-0xfe01 has been reserved <6>system 00:07: iomem range 0xfed1c000-0xfed1ffff could not be reserved <6>system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved <6>system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved <6>system 00:08: iomem range 0xfec00000-0xfecfffff has been reserved <6>system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved <6>system 00:0b: iomem range 0xff780000-0xffbfffff could not be reserved <6>system 00:0b: iomem range 0xffb80000-0xffffffff could not be reserved <6>system 00:0c: iomem range 0xffc00000-0xffb7ffff could not be reserved <6>system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved <6>system 00:0e: iomem range 0x0-0x9ffff could not be reserved <6>system 00:0e: iomem range 0xc0000-0xdffff could not be reserved <6>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved <6>system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved <6>system 00:0e: iomem range 0x0-0x0 could not be reserved <6>PCI: Bridge: 0000:00:01.0 <6> IO window: 9000-bfff <6> MEM window: 0xfe900000-0xfe9fffff <6> PREFETCH window: 0x00000000cff00000-0x00000000dfefffff <4>PCI: Bus 3, cardbus bridge: 0000:02:01.0 <6> IO window: 0x0000c000-0x0000c0ff <6> IO window: 0x0000c400-0x0000c4ff <6> PREFETCH window: 0x50000000-0x53ffffff <6> MEM window: 0x58000000-0x5bffffff <6>PCI: Bridge: 0000:00:1e.0 <6> IO window: c000-cfff <6> MEM window: 0xfea00000-0xfeafffff <6> PREFETCH window: 0x0000000050000000-0x0000000055ffffff <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 <7>PCI: Setting latency timer of device 0000:00:01.0 to 64 <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64 <6>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21 <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>Unpacking initramfs...<7>Switched to high resolution mode on CPU 0 <4> done <6>Freeing initrd memory: 12771k freed <6>Machine check exception polling timer started. <6>audit: initializing netlink socket (disabled) <5>type=2000 audit(1217765339.204:1): initialized <4>highmem bounce pool size: 64 pages <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <7>pci 0000:01:00.0: Boot video device <7>PCI: Setting latency timer of device 0000:00:01.0 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:01.0:pcie00] <7>Allocate Port Service[0000:00:01.0:pcie03] <6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 131008k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=84 <6>vesafb: protected mode interface info at c000:59c3 <6>vesafb: pmi: set display start = c00c5a31, set palette = c00c5a6b <6>vesafb: pmi: ports = b010 b016 b054 b038 b03c b05c b000 b004 b0b0 b0b2 b0b4 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture... <6>bootsplash: silentjpeg size 166113 bytes <6>bootsplash: ...found (1024x768, 154167 bytes, v3). <4>Console: switching to colour frame buffer device 124x44 <6>fb0: VESA VGA frame buffer device <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <4>floppy0: no floppy controllers found <6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker as /devices/platform/pcspkr/input/input0 <6>cpuidle: using governor ladder <6>cpuidle: using governor menu <6>NET: Registered protocol family 1 <4>Using IPI No-Shortcut mode <4>registered taskstats version 1 <6>Freeing unused kernel memory: 256k freed <6>Write protecting the kernel read-only data: 1440k <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 <6>input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input2 <6>input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input3 <6>No dock devices found. <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <7>ahci 0000:00:1f.2: version 3.0 <6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 <6>ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl IDE mode <6>ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part <7>PCI: Setting latency timer of device 0000:00:1f.2 to 64 <6>scsi0 : ahci <6>scsi1 : ahci <6>scsi2 : ahci <6>scsi3 : ahci <6>ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 17 <6>ata2: DUMMY <6>ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 17 <6>ata4: DUMMY <6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata1.00: ATA-7: HTS541080G9SA00, MB4OC60D, max UDMA/100 <6>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (not used) <6>ata1.00: configured for UDMA/100 <6>ata3: SATA link down (SStatus 0 SControl 300) <5>scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4O PQ: 0 ANSI: 5 <7>ata_piix 0000:00:1f.1: version 2.12 <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 <7>PCI: Setting latency timer of device 0000:00:1f.1 to 64 <6>scsi4 : ata_piix <6>scsi5 : ata_piix <6>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 <6>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 <6>ata5.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.11, max UDMA/33 <6>ata5.00: configured for UDMA/33 <5>scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.11 PQ: 0 ANSI: 5 <6>Uniform Multi-Platform E-IDE driver <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>Driver 'sr' needs updating - please use bus_type methods <4>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 4:0:0:0: Attached scsi CD-ROM sr0 <4>Driver 'sd' needs updating - please use bus_type methods <5>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sda: sda1 sda2 < sda5 sda6 sda7 > <5>sd 0:0:0:0: [sda] Attached SCSI disk <6>st: Version 20080221, fixed bufsize 32768, s/g segs 256 <4>Driver 'st' needs updating - please use bus_type methods <5>sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>sr 4:0:0:0: Attached scsi generic sg1 type 5 <6>brd: module loaded <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 <7>PCI: Setting latency timer of device 0000:00:1d.7 to 64 <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 <6>ehci_hcd 0000:00:1d.7: debug port 1 <7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7 <6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800 <6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 8 ports detected <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: EHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.25.5-1.1-default ehci_hcd <6>usb usb1: SerialNumber: 0000:00:1d.7 <6>USB Universal Host Controller Interface driver v3.0 <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64 <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: UHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd <6>usb usb2: SerialNumber: 0000:00:1d.0 <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64 <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 <6>uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000dc00 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: UHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd <6>usb usb3: SerialNumber: 0000:00:1d.1 <6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 20 (level, low) -> IRQ 20 <7>PCI: Setting latency timer of device 0000:00:1d.2 to 64 <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 <6>uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e000 <6>usb usb4: configuration #1 chosen from 1 choice <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 2 ports detected <6>usb 1-1: new high speed USB device using ehci_hcd and address 2 <6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb4: Product: UHCI Host Controller <6>usb usb4: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd <6>usb usb4: SerialNumber: 0000:00:1d.2 <6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 21 <7>PCI: Setting latency timer of device 0000:00:1d.3 to 64 <6>uhci_hcd 0000:00:1d.3: UHCI Host Controller <6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 <6>uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000e080 <6>usb usb5: configuration #1 chosen from 1 choice <6>hub 5-0:1.0: USB hub found <6>hub 5-0:1.0: 2 ports detected <6>usb 1-1: configuration #1 chosen from 1 choice <6>usb 1-1: New USB device found, idVendor=0bda, idProduct=8187 <6>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>usb 1-1: Product: RTL8187_Wireless_LAN_Adapter <6>usb 1-1: Manufacturer: Manufacturer_Realtek_RTL8187_ <6>usb 1-1: SerialNumber: 00C0CA1B3748 <6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb5: Product: UHCI Host Controller <6>usb usb5: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd <6>usb usb5: SerialNumber: 0000:00:1d.3 <6>Initializing USB Mass Storage driver... <3>hub 1-0:1.0: unable to enumerate USB device on port 2 <3>hub 1-0:1.0: unable to enumerate USB device on port 8 <6>usb 2-2: new low speed USB device using uhci_hcd and address 2 <6>usb 2-2: configuration #1 chosen from 1 choice <6>usb 2-2: New USB device found, idVendor=046d, idProduct=c50a <6>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 2-2: Product: USB Receiver <6>usb 2-2: Manufacturer: Logitech <6>usb 5-2: new full speed USB device using uhci_hcd and address 2 <6>usb 5-2: configuration #1 chosen from 1 choice <6>usb 5-2: New USB device found, idVendor=044e, idProduct=300c <6>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 5-2: Product: UGX <6>usb 5-2: Manufacturer: ALPS <6>usbcore: registered new interface driver usb-storage <6>USB Mass Storage support registered. <7>ISO 9660 Extensions: Microsoft Joliet Level 3 <7>ISO 9660 Extensions: RRIP_1991A <7>ISO 9660 Extensions: Microsoft Joliet Level 3 <7>ISO 9660 Extensions: RRIP_1991A <6>loop: module loaded <6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher <4>fuse init (API version 7.9) <6>aufs 20080428 <4>aufs test_add:376:mount[1080]: uid/gid/perm /read-only 0/0/0755, 0/0/01777 <6>Bluetooth: Core ver 2.11 <6>NET: Registered protocol family 31 <6>Bluetooth: HCI device and connection manager initialized <6>Bluetooth: HCI socket layer initialized <6>iTCO_vendor_support: vendor-support=0 <6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) <6>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860) <6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) <6>sony-laptop: Sony Programmable IO Control Driver v0.6. <6>sony-laptop: detected Type3 model <6>input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:09/SNY6001:00/input/input4 <6>input: Sony Vaio Jogdial as /devices/virtual/input/input5 <6>sony-laptop: device allocated minor is 60 <6>sony-laptop: Sony Notebook Control Driver v0.6. <6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 <6>Linux agpgart interface v0.103 <3>intel_rng: FWH not detected <6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 <6>ACPI: CPU0 (power states: C1[C1] C2[C2]) <6>ACPI: ACPI0007:00 is registered as cooling_device0 <6>ACPI: Processor [CPU1] (supports 8 throttling states) <6>ACPI: Power Button (CM) [PWRB] <6>ACPI: AC Adapter [ACAD] (on-line) <6>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7 <6>ACPI: Lid Switch [LID] <4>Marking TSC unstable due to: TSC halts in idle. <4>Clocksource tsc unstable (delta = -296113317 ns) <6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 <6>rtc0: alarms up to one month, y3k <6>ACPI: PCI Interrupt 0000:02:01.3[B] -> GSI 22 (level, low) -> IRQ 22 <5>asus-laptop: Asus Laptop Support version 0.42 <5>asus-laptop: F2 model detected <6>tifm_core: MMC/SD card detected in socket 0:0 <6>usbcore: registered new interface driver hiddev <6>ACPI: Battery Slot [BAT1] (battery present) <6>Bluetooth: Generic Bluetooth USB driver ver 0.1 <6>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input8 <6>ACPI: LNXTHERM:01 is registered as thermal_zone0 <6>ACPI: Thermal Zone [ATF0] (58 C) <6>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded <6>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 17 <6>eth0: RTL8169sb/8110sb at 0xf928e400, 00:01:4a:f9:7b:36, XID 10000000 IRQ 17 <6>input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2 <6>usbcore: registered new interface driver btusb <6>usbcore: registered new interface driver usbhid <6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver <6>Yenta: CardBus bridge found at 0000:02:01.0 [104d:818f] <6>Yenta: Enabling burst memory read transactions <6>Yenta: Using CSCINT to route CSC interrupts to PCI <6>Yenta: Routing CardBus interrupts to PCI <6>Yenta TI: socket 0000:02:01.0, mfunc 0x01001b22, devctl 0x64 <6>Yenta: ISA IRQ mask 0x0cb8, PCI irq 21 <6>Socket status: 30000006 <6>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 <7>ieee80211_crypt: registered algorithm 'NULL' <6>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff <6>cs: IO port probe 0xc000-0xcfff: clean. <6>pcmcia: parent PCI bridge Memory window: 0xfea00000 - 0xfeafffff <6>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x55ffffff <6>ACPI: PCI Interrupt 0000:02:01.2[C] -> GSI 23 (level, low) -> IRQ 23 <6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[feafe800-feafefff] Max Packet=[2048] IR/IT contexts=[4/8] <6>ieee80211: 802.11 data/management/control stack, git-1.1.13 <6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> <6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 <7>PCI: Setting latency timer of device 0000:00:1b.0 to 64 <7>phy0: Selected rate control algorithm 'pid' <6>Bluetooth: HCI USB driver ver 2.9 <6>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq <6>ipw2200: Copyright(c) 2003-2006 Intel Corporation <6>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18 <6>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301ecb3df] <6>phy0: hwaddr 00:c0:ca:1b:37:48, rtl8187 V1 + rtl8225z2 <6>usbcore: registered new interface driver rtl8187 <6>usbcore: registered new interface driver hci_usb <6>ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) <6>cs: IO port probe 0x100-0x3af: clean. <6>cs: IO port probe 0x3e0-0x4ff: clean. <6>cs: IO port probe 0x820-0x8ff: clean. <6>cs: IO port probe 0xc00-0xcf7: clean. <6>cs: IO port probe 0xa00-0xaff: clean. <6>Bluetooth: L2CAP ver 2.9 <6>Bluetooth: L2CAP socket layer initialized <6>Bluetooth: RFCOMM socket layer initialized <6>Bluetooth: RFCOMM TTY layer initialized <6>Bluetooth: RFCOMM ver 1.8 <6>device-mapper: uevent: version 1.0.3 <6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Sun Aug 3 12:09:03 2008 -----> Starting boot shell on tty2 -----> Boot-Logging enabled on /dev/tty3 -----> Kernel logging enabled on: /dev/tty4 -----> Including required kernel modules... -----> Probing module: ahci -----> Probing module: ata_piix -----> Probing module: ehci-hcd -----> Probing module: uhci-hcd -----> Waiting for CD/DVD device(s) to appear... -----> Mounting CD/DVD drive... -----> Mounting compressed unified tree... -----> Stopping boot shell -----> Stopping boot logging Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Aug 3 12:09:26 2008 done Starting udevd: done Loading required kernel modules doneActivating swap-devices in /etc/fstab... doneroot file system (/) is NOT being checked. mount: can't find / in /etc/fstab or /etc/mtab Setting up the hardware clockhwclock: With --noadjfile, you must specify either --utc or --localtime failed Activating device mapper... done Starting MD Raid unused Waiting for udev to settle... Scanning for LVM volume groups... Reading all physical volumes. This may take a while... No volume groups found No volume groups found Activating LVM volume groups... No volume groups found done Checking file systems... fsck 1.40.8 (13-Mar-2008) donedone Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) nothing was mounted doneFuse filesystem already availabledone Mounting fuse control filesystemdone done Mounting securityfs on /sys/kernel/security done Loading AppArmor profiles <notice>killproc: kill(1178,29) Creating /var/log/boot.msg doneActivating remaining swap-devices in /etc/fstab... donedone Setting up linker cache (/etc/ld.so.cache) using ldconfigdone Turning quota on Checking quotas. This may take some time. done Setting up hostname 'linux'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 IP address: 127.0.0.2/8 done Configuring serial ports... Configured serial ports doneSetting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 fs.inotify.max_user_watches = 65536 net.ipv4.conf.default.promote_secondaries = 1 net.ipv4.conf.all.promote_secondaries = 1 done Enabling syn flood protectiondone Disabling IP forwardingdone done System Boot Control: The system has been set up Skipped features: boot.md System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(1178,3) Boot logging started on /dev/tty1(/dev/console) at Sun Aug 3 12:10:08 2008 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Starting D-Bus daemondone Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/sbin/resmgrd ] done <notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console IFS= TERM=linux SHELL=/bin/sh LC_ALL=POSIX ELOG_CONSOLE=/dev/tty3 INIT_VERSION=sysvinit-2.86 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors REDIRECT=/dev/tty1 systemIntegrity=clean COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N LINES=44 FSTYPE=squashfs PARTITIONER=sfdisk IFS_ORIG= SHLVL=2 HOME=/ ramdisk_blocksize=4096 BOOT_IMAGE=linux IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 SPLASH=yes KLOG_CONSOLE=4 splash=silent ramdisk_size=512000 LIVECD=livecd LIVECD_CONFIG=/cdrom/config.isoclient ARCH=i686 DEBUG=0 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console IFS= TERM=linux SHELL=/bin/sh LC_ALL=POSIX ELOG_CONSOLE=/dev/tty3 INIT_VERSION=sysvinit-2.86 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors REDIRECT=/dev/tty1 systemIntegrity=clean COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N LINES=44 FSTYPE=squashfs PARTITIONER=sfdisk IFS_ORIG= SHLVL=2 HOME=/ ramdisk_blocksize=4096 BOOT_IMAGE=linux IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 SPLASH=yes KLOG_CONSOLE=4 splash=silent ramdisk_size=512000 LIVECD=livecd LIVECD_CONFIG=/cdrom/config.isoclient ARCH=i686 DEBUG=0 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog servicesdone <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG= _=/sbin/startproc DAEMON=/sbin/acpid ] Starting acpid done Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ] done Loading CPUFreq modulesdone Starting HAL daemonCreating X Config<notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=no _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ] <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/sbin/portmap ] <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/sbin/auditd ] <notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ] <notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ] <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] done done Starting the NetworkManagerdone Starting RPC portmap daemondone Loading keymap i386/qwerty/us.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Start Unicode mode doneStarting auditd done Starting Avahi daemon.done Starting Avahi DNS Configuration daemondone Starting cupsddone Starting java.binfmt_misc done Checking/updating CPU microcode done Starting Name Service Cache Daemondone Starting mail service (Postfix)done Starting powersaved: done Initializing random number generatordone Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console IFS= TERM=linux SHELL=/bin/sh ELOG_CONSOLE=/dev/tty3 INIT_VERSION=sysvinit-2.86 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 systemIntegrity=clean COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ ELOG_FILE=/var/log/boot.kiwi LANG=en_US.UTF-8 LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N LINES=44 FSTYPE=squashfs PARTITIONER=sfdisk IFS_ORIG= QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ ramdisk_blocksize=4096 BOOT_IMAGE=linux IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 XCURSOR_THEME=DMZ WINDOWMANAGER= SPLASH=yes KLOG_CONSOLE=4 splash=silent ramdisk_size=512000 LIVECD=livecd LIVECD_CONFIG=/cdrom/config.isoclient ARCH=i686 DEBUG=0 _=/sbin/startproc DAEMON=/usr/bin/kdm ] done Starting service kdmdone done Master Resource Control: runlevel 5 has been reached <notice>killproc: kill(2464,3) 4. I have formated a Partition and no Error occured! I think in the live system, there is something different to the main dvd -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User teheo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c11 --- Comment #11 from Tejun Heo <teheo@novell.com> 2008-08-03 16:33:19 MDT --- Ingo, thanks for the report but please attach larger outputs next time. It becomes a bit difficult to track the bug with such large output inlined. So, nothing wrong w/ live CD, strange. It uses exactly the same kernel. Can you please retry DVD install? When the install freezes switch to vc4 (ctrl-alt-f4). You'll be able to see what the kernel is doing while frozen. Can you please report what the kernel says? You can do it by one of the following methods. 1. Switch to vc9 (alt-f9), plug in a usb stick, mount it under /mnt and "cp /var/log/boot.msg /mnt; dmesg /mnt/dmesg.out; umount /mnt" 2. If you have another machine, start SSH installation by specifying "usessh=1" at the installer boot prompt. It will ask for ssh password and network configuration during boot and you'll be able to start installation using ssh tunnel. You can open a separate ssh session and dump /var/log/boot.msg and dmesg output. Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User sebastian@netquint.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c12 --- Comment #12 from Sebastian Quint <sebastian@netquint.de> 2008-08-20 01:41:10 MDT --- Created an attachment (id=234312) --> (https://bugzilla.novell.com/attachment.cgi?id=234312) Boot Log from the Installtion Opensuse on Vaio VGN-A617B Hello, I have the same Problem with the Vaio VGN-A617B the LiveCD is working and the Installation from DVD hangs. The only messages I get is Emask frozen and port is slow to respond. Sebastian -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User sebastian@netquint.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c13 --- Comment #13 from Sebastian Quint <sebastian@netquint.de> 2008-08-20 01:41:53 MDT --- Created an attachment (id=234313) --> (https://bugzilla.novell.com/attachment.cgi?id=234313) Dmesg Output from Installation Vaio VGN-A617B -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User teheo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c14 Tejun Heo <teheo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Info Provider|cortijosanroque@hotmail.com |sebastian@netquint.de --- Comment #14 from Tejun Heo <teheo@novell.com> 2008-08-20 02:22:34 MDT --- Sebastian can you please post /var/log/boot.msg from the live CD and the output of "lspci -nnvvv"? Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User sebastian@netquint.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c15 --- Comment #15 from Sebastian Quint <sebastian@netquint.de> 2008-08-20 05:00:17 MDT --- Created an attachment (id=234395) --> (https://bugzilla.novell.com/attachment.cgi?id=234395) Boot MSG from the Live CD -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User sebastian@netquint.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c16 --- Comment #16 from Sebastian Quint <sebastian@netquint.de> 2008-08-20 05:00:38 MDT --- Created an attachment (id=234396) --> (https://bugzilla.novell.com/attachment.cgi?id=234396) LSPCI OUT from Live CD -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User teheo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c17 --- Comment #17 from Tejun Heo <teheo@novell.com> 2008-08-20 21:54:01 MDT --- Does disconnecting the USB external disk make difference? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User sebastian@netquint.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c18 Sebastian Quint <sebastian@netquint.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |sebastian@netquint.de --- Comment #18 from Sebastian Quint <sebastian@netquint.de> 2008-08-20 22:11:19 MDT --- Hello, on the USB there were only my Pen Drive connected, but I also have tried without my Pen Drive. It was the same always hanging by the format of the drive. Sebastian -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c19 --- Comment #19 from Ingo Schulz <infoman@imail.de> 2008-08-22 16:39:15 MDT --- Hello, sry for my late response, i tried to install and i got a freeze. I have copied the important files to a usb stick an provide them here as an atachment. I hope this files will help to find the bug. Ingo -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c20 --- Comment #20 from Ingo Schulz <infoman@imail.de> 2008-08-22 16:42:17 MDT --- Created an attachment (id=235069) --> (https://bugzilla.novell.com/attachment.cgi?id=235069) dmesg output after the first (early) freeze -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c21 --- Comment #21 from Ingo Schulz <infoman@imail.de> 2008-08-22 16:42:59 MDT --- Created an attachment (id=235070) --> (https://bugzilla.novell.com/attachment.cgi?id=235070) boot.msg (copied to the usb stick after the first freeze) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User teheo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c22 --- Comment #22 from Tejun Heo <teheo@novell.com> 2008-08-22 20:07:28 MDT --- Eh... I'm getting a bit confused here. Does installing from live CD work? Or does it fail too? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User teheo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c23 --- Comment #23 from Tejun Heo <teheo@novell.com> 2008-08-22 20:08:43 MDT --- Also, does specifying "brokenmodules=ahci" at the boot loader prompt make any difference? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c24 --- Comment #24 from Ingo Schulz <infoman@imail.de> 2008-08-23 04:23:00 MDT --- Created an attachment (id=235101) --> (https://bugzilla.novell.com/attachment.cgi?id=235101) the boot.msg after ive tried to install from livecd -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c25 --- Comment #25 from Ingo Schulz <infoman@imail.de> 2008-08-23 04:23:42 MDT --- Created an attachment (id=235102) --> (https://bugzilla.novell.com/attachment.cgi?id=235102) dmesg.out (installation from livecd) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c26 --- Comment #26 from Ingo Schulz <infoman@imail.de> 2008-08-23 04:24:22 MDT --- Created an attachment (id=235103) --> (https://bugzilla.novell.com/attachment.cgi?id=235103) lspci -vvnnn (Installation from livecd) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c27 --- Comment #27 from Ingo Schulz <infoman@imail.de> 2008-08-23 04:25:16 MDT --- Created an attachment (id=235104) --> (https://bugzilla.novell.com/attachment.cgi?id=235104) boot.msg (Installation from Livecd mit "brokenmodules=ahci" option -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c28 --- Comment #28 from Ingo Schulz <infoman@imail.de> 2008-08-23 04:25:43 MDT --- Created an attachment (id=235105) --> (https://bugzilla.novell.com/attachment.cgi?id=235105) dmesg.out (Installation from Livecd mit "brokenmodules=ahci" option -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c29 --- Comment #29 from Ingo Schulz <infoman@imail.de> 2008-08-23 04:26:06 MDT --- Created an attachment (id=235106) --> (https://bugzilla.novell.com/attachment.cgi?id=235106) lspci -vvnnn (Installation from Livecd mit "brokenmodules=ahci" option -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c30 --- Comment #30 from Ingo Schulz <infoman@imail.de> 2008-08-23 04:30:50 MDT --- Hello, Installation from LiveCD fails in both cases with and without the brokenmodules=ahci option. The freezes started after i ve entered the new passwords and the start of investigating the installation partition. (I had to press 4 sec power off to poweroff the pc) An additional observation: the touchpad doesnt work properly with livecd. The cursor stopps every 5-10 sec. The build in wireless module with the wireless mouse works properly! Ingo -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User teheo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c31 --- Comment #31 from Tejun Heo <teheo@novell.com> 2008-08-29 05:27:52 MDT --- Thanks for testing. Hmmm... brokenmodules=ahci was ignored by the live CD. Lemme check. Right, live CD uses different booting mechanism. Can you please try "brokenmodules=ahci" with installation DVD. That should make your hard drive driven by ata_piix instead of ahci. Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c32 --- Comment #32 from Ingo Schulz <infoman@imail.de> 2008-08-31 15:28:58 MDT --- Hello, i could successfully install Opensuse 11 from DVD with brokenmodules=ahci. But after install an booting from harddisk, the known errors occured. I tried to blacklist ahci in the modprobe.d directory but this did not help. I tried using google once again and i saw, that there is an ahci.blacklist=yes bootoption. I entered this bootoption, and ... it works know :-). I think Suse needs a patch to prevent loading ahci for our "sata" controller. it works fine with ata_piix. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User teheo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c33 --- Comment #33 from Tejun Heo <teheo@novell.com> 2008-09-01 02:39:03 MDT --- Please post the output of "dmidecode". Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c34 --- Comment #34 from Ingo Schulz <infoman@imail.de> 2008-09-01 05:04:45 MDT --- Created an attachment (id=236533) --> (https://bugzilla.novell.com/attachment.cgi?id=236533) output (dmidecode) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com