[Bug 488563] New: Not able to set up wifi on eee-pc-901, after update.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c486267 Summary: Not able to set up wifi on eee-pc-901, after update. Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: 32bit OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Mobile Devices AssignedTo: zoz@novell.com ReportedBy: monkey9@iae.nl QAContact: qa@suse.de Found By: Beta-Customer As subject: wifi does not work anymore, configuring it manualy does not work. Nm did not work from the start, but now ifup sees the network, but does not connect. I tried the workaround from bug #486267, but that file or folder does not exist: EEE-PC-901-ROB:/home/oddball # rm -r /var/run/dbus/at_console/root rm: kan '/var/run/dbus/at_console/root' niet verwijderen: Bestand of map bestaat niet EEE-PC-901-ROB:/home/oddball # rcnetwork restart Shutting down network interfaces: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) done ra0 device: RaLink RT2860 done Shutting down service network . . . . . . .done . Hint: you may set mandatory devices in /etc/sysconfig/network/config Setting up network interfaces: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) eth0 is controlled by ifplugd waiting ra0 device: RaLink RT2860 ra0 warning: using NO encryption command 'iwconfig ra0 mode Master' returned Error for wireless request "Set Mode" (8B06) : SET failed on device ra0 ; Network is down. command 'iwconfig ra0 nick EEE-PC-901-ROB' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device ra0 ; Network is down. command 'iwconfig ra0 key off' returned Error for wireless request "Set Encode" (8B2A) : SET failed on device ra0 ; Network is down. command 'iwconfig ra0 essid linksys' returned Error for wireless request "Set ESSID" (8B1A) : SET failed on device ra0 ; Network is down. done Setting up service network . . . . . . . .done . EEE-PC-901-ROB:/home/oddball # rcnetwork restart Shutting down network interfaces: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) done ra0 device: RaLink RT2860 done Shutting down service network . . . . . . .done . Hint: you may set mandatory devices in /etc/sysconfig/network/config Setting up network interfaces: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) eth0 is controlled by ifplugd waiting ra0 device: RaLink RT2860 ra0 warning: using NO encryption command 'iwconfig ra0 mode Managed' returned Error for wireless request "Set Mode" (8B06) : SET failed on device ra0 ; Network is down. command 'iwconfig ra0 nick EEE-PC-901-ROB' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device ra0 ; Network is down. command 'iwconfig ra0 key off' returned Error for wireless request "Set Encode" (8B2A) : SET failed on device ra0 ; Network is down. command 'iwconfig ra0 essid linksys' returned Error for wireless request "Set ESSID" (8B1A) : SET failed on device ra0 ; Network is down. ra0 Starting DHCP4 client. . . . . . . . ra0 DHCP4 continues in background waiting Setting up service network . . . . . . . .done . EEE-PC-901-ROB:/home/oddball # iwconfig lo no wireless extensions. eth0 no wireless extensions. ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA" Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:1 Mb/s RTS thr:off Fragment thr:off Encryption key:off Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 EEE-PC-901-ROB:/home/oddball # iwconfig lo no wireless extensions. eth0 no wireless extensions. ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA" Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:1 Mb/s RTS thr:off Fragment thr:off Encryption key:off Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 EEE-PC-901-ROB:/home/oddball # iwconfig ra0 mode managed EEE-PC-901-ROB:/home/oddball # iwconfig ra0 essid "linksys" EEE-PC-901-ROB:/home/oddball # iwconfig ra0 key open EEE-PC-901-ROB:/home/oddball # iwconfig ra0 channel auto Error for wireless request "Set Frequency" (8B04) : SET failed on device ra0 ; Invalid argument. EEE-PC-901-ROB:/home/oddball # rcnetwork restart Shutting down network interfaces: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) done ra0 device: RaLink RT2860 done Shutting down service network . . . . . . . . done Hint: you may set mandatory devices in /etc/sysconfig/network/config Setting up network interfaces: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) eth0 is controlled by ifplugd waiting ra0 device: RaLink RT2860 ra0 warning: using NO encryption command 'iwconfig ra0 mode Managed' returned Error for wireless request "Set Mode" (8B06) : SET failed on device ra0 ; Network is down. command 'iwconfig ra0 nick EEE-PC-901-ROB' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device ra0 ; Network is down. command 'iwconfig ra0 key off' returned Error for wireless request "Set Encode" (8B2A) : SET failed on device ra0 ; Network is down. command 'iwconfig ra0 essid linksys' returned Error for wireless request "Set ESSID" (8B1A) : SET failed on device ra0 ; Network is down. ra0 Starting DHCP4 client. . . . . . . . ra0 DHCP4 continues in background waiting Setting up service network . . . . . . . . . done EEE-PC-901-ROB:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c1 --- Comment #1 from Robby Verberne <monkey9@iae.nl> 2009-03-25 03:26:55 MST --- I dunno, but somehow the essid wont stick: (am i doing something wrong here?) EEE-PC-901-ROB:/home/oddball # iwconfig ra0 essid "linksys" EEE-PC-901-ROB:/home/oddball # iwconfig lo no wireless extensions. eth0 no wireless extensions. ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA" Mode:Auto Frequency=2.412 GHz Access Point: Not-Assocated Bit Rate:1 Mb/s RTS thr:off Fragment thr:off Encryption key:off Link Quality=10/100 Signal level:0 dBm Noise level:-9 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag: Tx excessive retries:0 Invalid misc:0 Missed beacon: EEE-PC-901-ROB:/home/oddball # iwconfig RT2860 Wireless ESSID:"liksys" iwconfig: unknown command "Wireless" EEE-PC-901-ROB:/home/oddball # iwconfig RT2860 ESSID:"linksys"iwconfig: unknown command "ESSID:linksys" EEE-PC-901-ROB:/home/oddball # iwconfig RT2860 essid:"linksys" iwconfig: unknown command "essid:linksys" EEE-PC-901-ROB:/home/oddball # iwconfig RT2860 essid: "linksys" iwconfig: unknown command "essid:" EEE-PC-901-ROB:/home/oddball # E -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c2 --- Comment #2 from Robby Verberne <monkey9@iae.nl> 2009-03-25 09:22:34 MST --- I reinstalled. Networkmanager cannot connect. I switch to ifup: smpppd and some other pkgs get installed: imediately online. Install finishes, no updates, still online wifi. The updates show, i unmark rt2860, it still gets installed: no more wifi. I uninstall all networkmanager pkgs and rt2860, still no wifi. I update yast2 base and network: essid stays saved, but still network is down. I reboot router, no wifi. Last restart network: oddball@EEE-PC-901-ROB:~> su Wachtwoord: EEE-PC-901-ROB:/home/oddball # rcnetwork restart Shutting down network interfaces: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) done ra0 device: RaLink RT2860 done Shutting down service network . . . . . . . . done Hint: you may set mandatory devices in /etc/sysconfig/network/config Setting up network interfaces: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) eth0 Starting DHCP4 client. eth0 IP address: 192.168.1.100/24 (EEE-PC-901done) ra0 device: RaLink RT2860 ra0 warning: using NO encryption command 'iwconfig ra0 mode Managed' returned Error for wireless request "Set Mode" (8B06) : SET failed on device ra0 ; Network is down. command 'iwconfig ra0 nick EEE-PC-901-ROB' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device ra0 ; Network is down. command 'iwconfig ra0 key off' returned Error for wireless request "Set Encode" (8B2A) : SET failed on device ra0 ; Network is down. command 'iwconfig ra0 essid linksys' returned Error for wireless request "Set ESSID" (8B1A) : SET failed on device ra0 ; Network is down. ra0 Starting DHCP4 client. . . . . . . . ra0 DHCP4 continues in background waiting Setting up service network . . . . . . . . . done SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... SuSEfirewall2: using default zone 'ext' for interface ra0 SuSEfirewall2: batch committing... SuSEfirewall2: Firewall rules successfully set EEE-PC-901-ROB:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c3 --- Comment #3 from Robby Verberne <monkey9@iae.nl> 2009-03-25 14:14:28 MST --- I reinstalled again, this time no online updates until i caught the logs. Systemlog contains much about ra0. Until now the wifi is stil working, no updates, no reboot. Systemlog: Mar 25 18:39:08 linux syslog-ng[3001]: syslog-ng starting up; version='2.0.9' Mar 25 18:39:13 linux kernel: klogd 1.4.1, log source = /proc/kmsg started. Mar 25 18:39:13 linux kernel: type=1505 audit(1238006340.900:2): operation="profile_load" name="/bin/ping" name2="default" pid=1932 Mar 25 18:39:13 linux kernel: type=1505 audit(1238006341.248:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1956 Mar 25 18:39:13 linux kernel: type=1505 audit(1238006341.784:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1992 Mar 25 18:39:13 linux kernel: type=1505 audit(1238006342.397:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=2005 Mar 25 18:39:13 linux kernel: type=1505 audit(1238006342.829:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=2006 Mar 25 18:39:13 linux kernel: type=1505 audit(1238006343.209:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=2007 Mar 25 18:39:13 linux kernel: type=1505 audit(1238006343.676:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=2008 Mar 25 18:39:13 linux kernel: type=1505 audit(1238006344.124:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=2010 Mar 25 18:39:13 linux kernel: type=1505 audit(1238006344.712:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=2011 Mar 25 18:39:13 linux kernel: type=1505 audit(1238006345.092:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=2012 Mar 25 18:39:13 linux kernel: powernow: This module only works with AMD K7 CPUs Mar 25 18:39:19 linux kernel: NET: Registered protocol family 10 Mar 25 18:39:19 linux kernel: lo: Disabled Privacy Extensions Mar 25 19:39:35 linux kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready Mar 25 19:39:35 linux kernel: RX DESC f517b000 size = 2048 Mar 25 19:39:35 linux kernel: <-- RTMPAllocTxRxRingMemory, Status=0 Mar 25 19:39:35 linux kernel: --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat Mar 25 19:39:35 linux kernel: 1. Phy Mode = 0 Mar 25 19:39:35 linux kernel: 2. Phy Mode = 0 Mar 25 19:39:35 linux kernel: RTMPSetPhyMode: channel is out of range, use first channel=1 Mar 25 19:39:35 linux kernel: 3. Phy Mode = 0 Mar 25 19:39:35 linux kernel: MCS Set = 00 00 00 00 00 Mar 25 19:39:35 linux kernel: <==== RTMPInitialize, Status=0 Mar 25 19:39:35 linux kernel: 0x1300 = 00073200 Mar 25 19:39:36 linux kernel: st: Version 20080504, fixed bufsize 32768, s/g segs 256 Mar 25 19:39:45 linux kernel: ra0: no IPv6 routers present Mar 25 19:40:35 linux su: (to root) root on none Mar 25 19:40:51 linux kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Mar 25 19:40:58 linux kernel: NET: Registered protocol family 17 Mar 25 19:42:03 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Mar 25 19:42:03 linux SuSEfirewall2: using default zone 'ext' for interface eth0 Mar 25 19:42:03 linux kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team Mar 25 19:42:03 linux kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) Mar 25 19:42:03 linux kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use Mar 25 19:42:03 linux kernel: nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or Mar 25 19:42:03 linux kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Mar 25 19:42:03 linux SuSEfirewall2: batch committing... Mar 25 19:42:03 linux SuSEfirewall2: Firewall rules successfully set Mar 25 19:42:06 linux ifdown: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) Mar 25 19:42:06 linux ifdown: No configuration found for eth0 Mar 25 19:42:06 linux ifdown: Nevertheless the interface will be shut down. Mar 25 19:42:07 linux ifdown: ra0 device: RaLink RT2860 Mar 25 19:42:09 linux ifup: lo Mar 25 19:42:10 linux ifup: lo Mar 25 19:42:10 linux ifup: IP address: 127.0.0.1/8 Mar 25 19:42:10 linux ifup: Mar 25 19:42:10 linux ifup: Mar 25 19:42:10 linux ifup: IP address: 127.0.0.2/8 Mar 25 19:42:10 linux ifup: Mar 25 19:42:10 linux ifup: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) Mar 25 19:42:10 linux ifup: No configuration found for eth0 Mar 25 19:42:11 linux ifup: ra0 device: RaLink RT2860 Mar 25 19:42:11 linux ifup: ra0 is controlled by ifplugd Mar 25 19:42:11 linux ifup: ra0 device: RaLink RT2860 Mar 25 19:42:11 linux ifup-wireless: ra0 warning: using NO encryption Mar 25 19:42:11 linux ifup-wireless: command 'iwconfig ra0 mode Managed' returned Mar 25 19:42:11 linux ifup-wireless: Error for wireless request "Set Mode" (8B06) : Mar 25 19:42:11 linux ifup-wireless: SET failed on device ra0 ; Network is down. Mar 25 19:42:11 linux ifup-wireless: command 'iwconfig ra0 nick EEE-PC-901-ROB' returned Mar 25 19:42:11 linux ifup-wireless: Error for wireless request "Set Nickname" (8B1C) : Mar 25 19:42:11 linux ifup-wireless: SET failed on device ra0 ; Network is down. Mar 25 19:42:11 linux ifup-wireless: command 'iwconfig ra0 key off' returned Mar 25 19:42:11 linux ifup-wireless: Error for wireless request "Set Encode" (8B2A) : Mar 25 19:42:11 linux ifup-wireless: SET failed on device ra0 ; Network is down. Mar 25 19:42:11 linux ifup-wireless: command 'iwconfig ra0 essid any' returned Mar 25 19:42:11 linux ifup-wireless: Error for wireless request "Set ESSID" (8B1A) : Mar 25 19:42:11 linux ifup-wireless: SET failed on device ra0 ; Network is down. Mar 25 19:42:11 linux kernel: RX DESC f5c05000 size = 2048 Mar 25 19:42:11 linux kernel: <-- RTMPAllocTxRxRingMemory, Status=0 Mar 25 19:42:11 linux kernel: --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat Mar 25 19:42:11 linux kernel: 1. Phy Mode = 0 Mar 25 19:42:11 linux kernel: 2. Phy Mode = 0 Mar 25 19:42:11 linux kernel: 3. Phy Mode = 0 Mar 25 19:42:11 linux kernel: MCS Set = 00 00 00 00 00 Mar 25 19:42:11 linux kernel: <==== RTMPInitialize, Status=0 Mar 25 19:42:11 linux kernel: 0x1300 = 00073200 Mar 25 19:42:12 linux ifup-dhcp: Starting DHCP4 client on ra0 Mar 25 19:42:12 linux dhcpcd[5977]: ra0: dhcpcd 3.2.3 starting Mar 25 19:42:12 linux dhcpcd[5977]: ra0: hardware address = 00:22:43:45:ef:c9 Mar 25 19:42:12 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:42:13 linux ifup-dhcp: . Mar 25 19:42:15 linux ifup-dhcp: . Mar 25 19:42:17 linux ifup-dhcp: . Mar 25 19:42:19 linux ifup-dhcp: . Mar 25 19:42:21 linux ifup-dhcp: . Mar 25 19:42:22 linux kernel: ra0: no IPv6 routers present Mar 25 19:42:23 linux ifup-dhcp: . Mar 25 19:42:25 linux ifup-dhcp: . Mar 25 19:42:27 linux ifup-dhcp: . Mar 25 19:42:29 linux ifup-dhcp: Mar 25 19:42:29 linux ifup-dhcp: ra0 DHCP4 continues in background Mar 25 19:42:30 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Mar 25 19:42:30 linux SuSEfirewall2: using default zone 'ext' for interface eth0 Mar 25 19:42:30 linux SuSEfirewall2: batch committing... Mar 25 19:42:30 linux SuSEfirewall2: Firewall rules successfully set Mar 25 19:42:32 linux dhcpcd[5977]: ra0: timed out Mar 25 19:42:32 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:42:32 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:42:32 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:42:42 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3 Mar 25 19:42:42 linux kernel: ISO 9660 Extensions: RRIP_1991A Mar 25 19:42:52 linux dhcpcd[5977]: ra0: timed out Mar 25 19:42:52 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:42:52 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:42:52 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:42:53 linux SuSEfirewall2: batch committing... Mar 25 19:42:53 linux SuSEfirewall2: Firewall rules unloaded. Mar 25 19:42:53 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Mar 25 19:42:53 linux SuSEfirewall2: using default zone 'ext' for interface eth0 Mar 25 19:42:53 linux SuSEfirewall2: batch committing... Mar 25 19:42:53 linux SuSEfirewall2: Firewall rules successfully set Mar 25 19:42:55 linux SuSEfirewall2: batch committing... Mar 25 19:42:55 linux SuSEfirewall2: Firewall rules unloaded. Mar 25 19:42:56 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Mar 25 19:42:56 linux SuSEfirewall2: using default zone 'ext' for interface eth0 Mar 25 19:42:56 linux SuSEfirewall2: batch committing... Mar 25 19:42:56 linux SuSEfirewall2: Firewall rules successfully set Mar 25 19:43:01 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Mar 25 19:43:01 linux SuSEfirewall2: using default zone 'ext' for interface eth0 Mar 25 19:43:02 linux SuSEfirewall2: batch committing... Mar 25 19:43:02 linux SuSEfirewall2: Firewall rules successfully set Mar 25 19:43:12 linux dhcpcd[5977]: ra0: timed out Mar 25 19:43:12 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:43:12 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:43:12 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:43:25 linux init: Re-reading inittab Mar 25 19:43:32 linux dhcpcd[5977]: ra0: timed out Mar 25 19:43:32 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:43:32 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:43:32 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:43:52 linux dhcpcd[5977]: ra0: timed out Mar 25 19:43:52 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:43:52 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:43:52 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:44:06 linux kernel: [drm] Initialized drm 1.1.0 20060810 Mar 25 19:44:06 linux kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Mar 25 19:44:06 linux kernel: pci 0000:00:02.0: setting latency timer to 64 Mar 25 19:44:06 linux kernel: [drm] Initialized i915 1.6.0 20060119 on minor 0 Mar 25 19:44:06 linux kernel: [drm:i915_getparam] *ERROR* Unknown parameter 5 Mar 25 19:44:08 linux kernel: [drm:i915_getparam] *ERROR* Unknown parameter 5 Mar 25 19:44:12 linux dhcpcd[5977]: ra0: timed out Mar 25 19:44:14 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:44:14 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:44:14 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:44:34 linux dhcpcd[5977]: ra0: timed out Mar 25 19:44:34 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:44:34 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:44:34 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:44:36 linux kernel: lp: driver loaded but no devices found Mar 25 19:44:36 linux kernel: ppdev: user-space parallel port driver Mar 25 19:44:54 linux dhcpcd[5977]: ra0: timed out Mar 25 19:44:54 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:44:54 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:44:54 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:45:04 linux kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled Mar 25 19:45:04 linux kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Mar 25 19:45:04 linux kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64 Mar 25 19:45:14 linux dhcpcd[5977]: ra0: timed out Mar 25 19:45:14 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:45:14 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:45:14 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:45:35 linux dhcpcd[5977]: ra0: timed out Mar 25 19:45:35 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:45:35 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:45:35 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:45:55 linux dhcpcd[5977]: ra0: timed out Mar 25 19:45:55 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:45:55 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:45:55 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:46:15 linux dhcpcd[5977]: ra0: timed out Mar 25 19:46:15 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:46:15 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:46:15 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:46:35 linux dhcpcd[5977]: ra0: timed out Mar 25 19:46:35 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:46:35 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:46:35 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:46:55 linux dhcpcd[5977]: ra0: timed out Mar 25 19:46:55 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:46:55 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:46:55 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:47:15 linux dhcpcd[5977]: ra0: timed out Mar 25 19:47:15 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:47:15 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:47:15 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:47:23 linux kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled Mar 25 19:47:23 linux kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Mar 25 19:47:23 linux kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64 Mar 25 19:47:35 linux dhcpcd[5977]: ra0: timed out Mar 25 19:47:35 linux dhcpcd[5977]: ra0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-ra0.info' Mar 25 19:47:35 linux dhcpcd[5977]: ra0: lease information file `/var/lib/dhcpcd/dhcpcd-ra0.info' does not exist Mar 25 19:47:35 linux dhcpcd[5977]: ra0: broadcasting for a lease Mar 25 19:47:40 linux ifdown: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) Mar 25 19:47:40 linux ifdown: No configuration found for eth0 Mar 25 19:47:40 linux ifdown: Nevertheless the interface will be shut down. Mar 25 19:47:41 linux dhcpcd[5977]: ra0: received SIGTERM, stopping Mar 25 19:47:41 linux dhcpcd-hook: ls: cannot access /var/run/netconfig//ra0/: No such file or directory Mar 25 19:47:41 linux dhcpcd[5977]: ra0: exiting Mar 25 19:47:42 linux init: Entering runlevel: 5 Mar 25 19:47:42 linux kernel: Kernel logging (proc) stopped. Mar 25 19:47:42 linux kernel: Kernel log daemon terminating. Mar 25 19:47:42 linux syslog-ng[3001]: Termination requested via signal, terminating; Mar 25 19:47:42 linux syslog-ng[3001]: syslog-ng shutting down; version='2.0.9' Mar 25 19:47:42 EEE-PC-901-ROB syslog-ng[9133]: syslog-ng starting up; version='2.0.9' Mar 25 19:47:42 EEE-PC-901-ROB SuSEfirewall2: batch committing... Mar 25 19:47:42 EEE-PC-901-ROB SuSEfirewall2: Firewall rules set to CLOSE. Mar 25 19:47:43 EEE-PC-901-ROB kdm_config[9241]: Multiple occurrences of key 'UseTheme' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc Mar 25 19:47:43 EEE-PC-901-ROB ifup: lo Mar 25 19:47:44 EEE-PC-901-ROB ifup: lo Mar 25 19:47:44 EEE-PC-901-ROB ifup: IP address: 127.0.0.1/8 Mar 25 19:47:44 EEE-PC-901-ROB ifup: Mar 25 19:47:44 EEE-PC-901-ROB ifup: Mar 25 19:47:44 EEE-PC-901-ROB ifup: IP address: 127.0.0.2/8 Mar 25 19:47:44 EEE-PC-901-ROB ifup: Mar 25 19:47:44 EEE-PC-901-ROB ifup: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) Mar 25 19:47:44 EEE-PC-901-ROB ifup: No configuration found for eth0 Mar 25 19:47:45 EEE-PC-901-ROB auditd[9515]: Started dispatcher: /sbin/audispd pid: 9517 Mar 25 19:47:45 EEE-PC-901-ROB audispd: priority_boost_parser called with: 4 Mar 25 19:47:45 EEE-PC-901-ROB audispd: af_unix plugin initialized Mar 25 19:47:45 EEE-PC-901-ROB audispd: audispd initialized with q_depth=80 and 1 active plugins Mar 25 19:47:45 EEE-PC-901-ROB auditd[9515]: Init complete, auditd 1.7.7 listening for events (startup state disable) Mar 25 19:47:46 EEE-PC-901-ROB avahi-daemon[9752]: Found user 'avahi' (UID 103) and group 'avahi' (GID 104). Mar 25 19:47:46 EEE-PC-901-ROB avahi-daemon[9752]: Successfully dropped root privileges. Mar 25 19:47:46 EEE-PC-901-ROB avahi-daemon[9752]: avahi-daemon 0.6.23 starting up. Mar 25 19:47:46 EEE-PC-901-ROB avahi-daemon[9752]: Loading service file /etc/avahi/services/sftp-ssh.service. Mar 25 19:47:46 EEE-PC-901-ROB avahi-daemon[9752]: Loading service file /etc/avahi/services/ssh.service. Mar 25 19:47:46 EEE-PC-901-ROB avahi-daemon[9752]: Network interface enumeration completed. Mar 25 19:47:46 EEE-PC-901-ROB avahi-daemon[9752]: Registering new address record for fe80::222:43ff:fe45:efc9 on ra0.*. Mar 25 19:47:46 EEE-PC-901-ROB avahi-daemon[9752]: Server startup complete. Host name is EEE-PC-901-ROB.local. Local service cookie is 3364242883. Mar 25 19:47:46 EEE-PC-901-ROB avahi-daemon[9752]: Service "EEE-PC-901-ROB" (/etc/avahi/services/ssh.service) successfully established. Mar 25 19:47:46 EEE-PC-901-ROB avahi-daemon[9752]: Service "SFTP File Transfer on EEE-PC-901-ROB" (/etc/avahi/services/sftp-ssh.service) successfully established. Mar 25 19:47:46 EEE-PC-901-ROB avahi-daemon[9752]: Registering HINFO record with values 'I686'/'LINUX'. Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: smartd 5.39 2008-10-24 22:33 [i686-suse-linux-gnu] (openSUSE RPM) Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Opened configuration file /etc/smartd.conf Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Drive: DEVICESCAN, implied '-a' Directive on line 26 of file /etc/smartd.conf Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Device: /dev/sda, type changed from 'scsi' to 'sat' Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Device: /dev/sda [SAT], opened Mar 25 19:47:47 EEE-PC-901-ROB smpppd[9868]: smpppd version 1.59_SVN31 started Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Device: /dev/sda [SAT], not found in smartd database. Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Device: /dev/sda [SAT], can't monitor Current Pending Sector count - no Attribute 197 Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Device: /dev/sda [SAT], can't monitor Offline Uncorrectable Sector count - no Attribute 198 Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Device: /dev/sda [SAT], appears to lack SMART Self-Test log; disabling -l selftest (override with -T permissive Directive) Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Device: /dev/sda [SAT], appears to lack SMART Error log; disabling -l error (override with -T permissive Directive) Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list. Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Device: /dev/sdb, opened Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Device: /dev/sdb, Bad IEC (SMART) mode page, err=5, skip device Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Monitoring 1 ATA and 0 SCSI devices Mar 25 19:47:47 EEE-PC-901-ROB smartd[9830]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.RunCore_64G_C__SSD-000901022255.ata.state Mar 25 19:47:47 EEE-PC-901-ROB smartd[9886]: smartd has fork()ed into background mode. New PID=9886. Mar 25 19:47:47 EEE-PC-901-ROB sshd[9927]: Server listening on 0.0.0.0 port 22. Mar 25 19:47:47 EEE-PC-901-ROB sshd[9927]: Server listening on :: port 22. Mar 25 19:47:47 EEE-PC-901-ROB kernel: klogd 1.4.1, log source = /proc/kmsg started. Mar 25 19:47:47 EEE-PC-901-ROB kernel: [drm:i915_getparam] *ERROR* Unknown parameter 5 Mar 25 19:47:47 EEE-PC-901-ROB kernel: [drm:i915_getparam] *ERROR* Unknown parameter 5 Mar 25 19:47:49 EEE-PC-901-ROB /usr/sbin/cron[10123]: (CRON) STARTUP (V5.0) Mar 25 19:47:49 EEE-PC-901-ROB ifup: ra0 device: RaLink RT2860 Mar 25 19:47:49 EEE-PC-901-ROB ifup: ra0 is controlled by ifplugd Mar 25 19:47:50 EEE-PC-901-ROB ifup: ra0 device: RaLink RT2860 Mar 25 19:47:50 EEE-PC-901-ROB ifup-wireless: ra0 warning: using NO encryption Mar 25 19:47:50 EEE-PC-901-ROB ifup-dhcp: Starting DHCP4 client on ra0 Mar 25 19:47:50 EEE-PC-901-ROB dhcpcd[10279]: ra0: dhcpcd 3.2.3 starting Mar 25 19:47:50 EEE-PC-901-ROB dhcpcd[10279]: ra0: hardware address = 00:22:43:45:ef:c9 Mar 25 19:47:50 EEE-PC-901-ROB dhcpcd[10279]: ra0: broadcasting for a lease Mar 25 19:47:51 EEE-PC-901-ROB ifup-dhcp: . Mar 25 19:47:53 EEE-PC-901-ROB ifup-dhcp: . Mar 25 19:47:55 EEE-PC-901-ROB ifup-dhcp: . Mar 25 19:47:57 EEE-PC-901-ROB ifup-dhcp: . Mar 25 19:47:59 EEE-PC-901-ROB ifup-dhcp: . Mar 25 19:48:02 EEE-PC-901-ROB ifup-dhcp: . Mar 25 19:48:03 EEE-PC-901-ROB dhcpcd[10279]: ra0: offered 192.168.1.113 from 192.168.1.1 Mar 25 19:48:03 EEE-PC-901-ROB dhcpcd[10279]: ra0: checking 192.168.1.113 is available on attached networks Mar 25 19:48:04 EEE-PC-901-ROB ifup-dhcp: . Mar 25 19:48:04 EEE-PC-901-ROB dhcpcd[10279]: ra0: leased 192.168.1.113 for 86400 seconds Mar 25 19:48:04 EEE-PC-901-ROB dhcpcd[10279]: ra0: adding IP address 192.168.1.113/24 Mar 25 19:48:04 EEE-PC-901-ROB avahi-daemon[9752]: Joining mDNS multicast group on interface ra0.IPv4 with address 192.168.1.113. Mar 25 19:48:04 EEE-PC-901-ROB dhcpcd[10279]: ra0: adding default route via 192.168.1.1 metric 0 Mar 25 19:48:04 EEE-PC-901-ROB avahi-daemon[9752]: New relevant interface ra0.IPv4 for mDNS. Mar 25 19:48:04 EEE-PC-901-ROB avahi-daemon[9752]: Registering new address record for 192.168.1.113 on ra0.IPv4. Mar 25 19:48:05 EEE-PC-901-ROB ifup-dhcp: Mar 25 19:48:05 EEE-PC-901-ROB ifup-dhcp: ra0 IP address: 192.168.1.113/24 (EEE-PC-901-ROB) Mar 25 19:48:05 EEE-PC-901-ROB syslog-ng[9133]: Configuration reload request received, reloading configuration; Mar 25 19:48:05 EEE-PC-901-ROB syslog-ng[9133]: New configuration initialized; Mar 25 19:48:05 EEE-PC-901-ROB SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Mar 25 19:48:05 EEE-PC-901-ROB SuSEfirewall2: using default zone 'ext' for interface eth0 Mar 25 19:48:05 EEE-PC-901-ROB ifdown: ra0 device: RaLink RT2860 Mar 25 19:48:06 EEE-PC-901-ROB SuSEfirewall2: batch committing... Mar 25 19:48:06 EEE-PC-901-ROB SuSEfirewall2: Firewall rules successfully set Mar 25 19:48:06 EEE-PC-901-ROB ifup: ra0 device: RaLink RT2860 Mar 25 19:48:06 EEE-PC-901-ROB kernel: klogd 1.4.1, ---------- state change ---------- Mar 25 19:48:06 EEE-PC-901-ROB SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Mar 25 19:48:06 EEE-PC-901-ROB SuSEfirewall2: using default zone 'ext' for interface eth0 Mar 25 19:48:07 EEE-PC-901-ROB SuSEfirewall2: batch committing... Mar 25 19:48:07 EEE-PC-901-ROB SuSEfirewall2: Firewall rules successfully set Mar 25 19:48:07 EEE-PC-901-ROB dhcpcd[10279]: ra0: exiting Mar 25 19:48:49 EEE-PC-901-ROB python: hp-systray(init)[11144]: warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting. Mar 25 19:57:45 EEE-PC-901-ROB kernel: CE: hpet increasing min_delta_ns to 22500 nsec Mar 25 19:59:45 EEE-PC-901-ROB kernel: ACPI: EC: missing confirmations, switch off interrupt mode. Mar 25 19:59:46 EEE-PC-901-ROB kernel: ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609] Mar 25 19:59:46 EEE-PC-901-ROB kernel: ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.BST2] (Node f7046d38), AE_TIME Mar 25 19:59:46 EEE-PC-901-ROB kernel: ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.CBST] (Node f70496e4), AE_TIME Mar 25 19:59:46 EEE-PC-901-ROB kernel: ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.BAT0._BST] (Node f7047c34), AE_TIME Mar 25 19:59:46 EEE-PC-901-ROB kernel: ACPI Exception (battery-0360): AE_TIME, Evaluating _BST [20080609] Mar 25 19:59:54 EEE-PC-901-ROB su: (to root) oddball on /dev/pts/2 Mar 25 19:59:55 EEE-PC-901-ROB su: (to root) oddball on /dev/pts/2 Mar 25 20:19:55 EEE-PC-901-ROB -- MARK -- Mar 25 20:39:55 EEE-PC-901-ROB -- MARK -- Mar 25 20:48:05 EEE-PC-901-ROB syslog-ng[9133]: Log statistics; dropped='pipe(/dev/xconsole)=0', dropped='pipe(/dev/tty10)=0', processed='center(queued)=52', processed='center(received)=32', processed='destination(newsnotice)=0', processed='destination(acpid)=0', processed='destination(firewall)=6', processed='destination(null)=0', processed='destination(mail)=0', processed='destination(mailinfo)=0', processed='destination(console)=6', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(messages)=26', processed='destination(mailwarn)=0', processed='destination(localmessages)=1', processed='destination(netmgm)=0', processed='destination(mailerr)=0', processed='destination(xconsole)=6', processed='destination(warn)=7', processed='source(src)=32' -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c4 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Component|Mobile Devices |Network AssignedTo|zoz@novell.com |bnc-team-screening@forge.pr | |ovo.novell.com --- Comment #4 from Robby Verberne <monkey9@iae.nl> 2009-03-26 07:28:14 MST --- This morning, i just booted, but no wifi was found, it was working when i shutted down last night. No updates installed yet. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User cyhan@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c5 Chuanye Han <cyhan@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |cyhan@novell.com AssignedTo|bnc-team-screening@forge.pr |tambet@novell.com |ovo.novell.com | --- Comment #5 from Chuanye Han <cyhan@novell.com> 2009-03-27 02:36:01 MST --- Tambet, could you please help to have a look at this? Feel free to reassign it whenever necessary. Thank you. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User tambet@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c6 Tambet Ingo <tambet@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl AssignedTo|tambet@novell.com |hschaa@novell.com --- Comment #6 from Tambet Ingo <tambet@novell.com> 2009-03-27 03:41:31 MST --- This looks more like a problem with the wifi driver. Although comment #2 says it worked for a while using ifup, all the other comments indicate it doesn't work from the command line either. NetworkManager uses wpa_supplicant for wireless configuration, please have a look at http://en.opensuse.org/Tracking_down_wireless_problems#How_to_set_up_a_conne... on how to set up a wireless connection using wpa_supplicant manually, and post it's log here (with maximum debug output -dddt) of failed connection attempt. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User hschaa@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c7 Helmut Schaa <hschaa@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |hschaa@novell.com AssignedTo|hschaa@novell.com |gregkh@novell.com --- Comment #7 from Helmut Schaa <hschaa@novell.com> 2009-03-27 04:07:07 MST --- (In reply to comment #3)
Mar 25 19:39:35 linux kernel: RX DESC f517b000 size = 2048 Mar 25 19:39:35 linux kernel: <-- RTMPAllocTxRxRingMemory, Status=0 Mar 25 19:39:35 linux kernel: --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
Seems like the driver tries to load a firmware image directly from disk :) which does not exist. Not sure if that is the problem but could you please check if you have the file /etc/Wireless/RT2860STA/RT2860STA.dat? Nevertheless, this is a staging driver. Reassigning to Greg. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c8 --- Comment #8 from Robby Verberne <monkey9@iae.nl> 2009-03-27 07:20:55 MST --- Atm impossible to check anything, as i did an update to 11.1 factory KDE4.2 this morning, and i suspect some xorg package wrecked my x. As sax2 is not able to save the config it finds ok, i only have init3 Have to find the command to clean the old and save the right config first. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c9 --- Comment #9 from Robby Verberne <monkey9@iae.nl> 2009-03-29 10:17:04 MDT --- (In reply to comment #7)
(In reply to comment #3)
Mar 25 19:39:35 linux kernel: RX DESC f517b000 size = 2048 Mar 25 19:39:35 linux kernel: <-- RTMPAllocTxRxRingMemory, Status=0 Mar 25 19:39:35 linux kernel: --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
Seems like the driver tries to load a firmware image directly from disk :) which does not exist. Not sure if that is the problem but could you please check if you have the file /etc/Wireless/RT2860STA/RT2860STA.dat?
Nevertheless, this is a staging driver. Reassigning to Greg.
/etc/Wireless/RT2860STA.dat exists, the problem is:there is no dir called RT2860STA... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c10 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #10 from Robby Verberne <monkey9@iae.nl> 2009-03-29 10:35:15 MDT --- I did use tis info for setting up ra0, but see yourself: oddball@EEEPC-901-ROB:~> su Wachtwoord: EEEPC-901-ROB:/home/oddball # rcnetwork stop Shutting down the NetworkManager done Shutting down network interfaces: eth0 device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) done ra0 device: RaLink RT2860 done Shutting down service network . . . . . . . . . done EEEPC-901-ROB:/home/oddball # killall wpa_supplicant EEEPC-901-ROB:/home/oddball # iwconfig lo no wireless extensions. eth0 no wireless extensions. ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA" Mode:Auto Frequency=2.462 GHz Access Point: 00:1E:E5:70:49:B8 Link Quality=10/100 Signal level:-35 dBm Noise level:-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 EEEPC-901-ROB:/home/oddball # ifconfig ra0 up EEEPC-901-ROB:/home/oddball # iwconfig ra0 essid linksys EEEPC-901-ROB:/home/oddball # iwconfig lo no wireless extensions. eth0 no wireless extensions. ra0 RT2860 Wireless ESSID:"linksys" Nickname:"RT2860STA" Mode:Managed Frequency=2.462 GHz Access Point: 00:1E:E5:70:49:B8 Bit Rate=54 Mb/s RTS thr:off Fragment thr:off Encryption key:off Link Quality=100/100 Signal level:-35 dBm Noise level:-81 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 EEEPC-901-ROB:/home/oddball # wpa_supplicant -Dwext -ira0 -c/etc/Wireless/RT2860STA.dat -dddt 1238343588.871590: Initializing interface 'ra0' conf '/etc/Wireless/RT2860STA.dat' driver 'wext' ctrl_interface 'N/A' bridge 'N/A' 1238343588.871835: Configuration file '/etc/Wireless/RT2860STA.dat' -> '/etc/Wireless/RT2860STA.dat' 1238343588.871882: Reading configuration file '/etc/Wireless/RT2860STA.dat' 1238343588.872090: Line 2: Invalid configuration line 'Default'. 1238343588.872130: Line 3: Invalid configuration line 'CountryRegion=5'. 1238343588.872160: Line 4: Invalid configuration line 'CountryRegionABand=7'. 1238343588.872189: Line 5: Invalid configuration line 'CountryCode='. 1238343588.872218: Line 6: Invalid configuration line 'ChannelGeography=1'. 1238343588.872247: Line 7: Invalid configuration line 'SSID=Dennis2860AP'. 1238343588.872274: Line 8: Invalid configuration line 'NetworkType=Infra'. 1238343588.872303: Line 9: Invalid configuration line 'WirelessMode=9'. 1238343588.872331: Line 10: Invalid configuration line 'Channel=0'. 1238343588.872359: Line 11: Invalid configuration line 'BeaconPeriod=100'. 1238343588.872387: Line 12: Invalid configuration line 'TxPower=100'. 1238343588.872417: Line 13: Invalid configuration line 'BGProtection=0'. 1238343588.872452: Line 14: Invalid configuration line 'TxPreamble=0'. 1238343588.872492: Line 15: Invalid configuration line 'RTSThreshold=2347'. 1238343588.872528: Line 16: Invalid configuration line 'FragThreshold=2346'. 1238343588.872562: Line 17: Invalid configuration line 'TxBurst=1'. 1238343588.872596: Line 18: Invalid configuration line 'PktAggregate=0'. 1238343588.872628: Line 19: Invalid configuration line 'WmmCapable=1'. 1238343588.872657: Line 20: Invalid configuration line 'AckPolicy=0;0;0;0'. 1238343588.872684: Line 21: Invalid configuration line 'AuthMode=OPEN'. 1238343588.872714: Line 22: Invalid configuration line 'EncrypType=NONE'. 1238343588.872741: Line 23: Invalid configuration line 'WPAPSK='. 1238343588.872769: Line 24: Invalid configuration line 'DefaultKeyID=1'. 1238343588.872797: Line 25: Invalid configuration line 'Key1Type=0'. 1238343588.872823: Line 26: Invalid configuration line 'Key1Str='. 1238343588.872852: Line 27: Invalid configuration line 'Key2Type=0'. 1238343588.872878: Line 28: Invalid configuration line 'Key2Str='. 1238343588.872906: Line 29: Invalid configuration line 'Key3Type=0'. 1238343588.872933: Line 30: Invalid configuration line 'Key3Str='. 1238343588.872960: Line 31: Invalid configuration line 'Key4Type=0'. 1238343588.872987: Line 32: Invalid configuration line 'Key4Str='. 1238343588.873014: Line 33: Invalid configuration line 'PSMode=CAM'. 1238343588.873042: Line 34: Invalid configuration line 'FastRoaming=0'. 1238343588.873070: Line 35: Invalid configuration line 'RoamThreshold=70'. 1238343588.873098: Line 36: Invalid configuration line 'APSDCapable=0'. 1238343588.873125: Line 37: Invalid configuration line 'APSDAC=0;0;0;0'. 1238343588.873152: Line 38: Invalid configuration line 'HT_RDG=1'. 1238343588.873180: Line 39: Invalid configuration line 'HT_EXTCHA=0'. 1238343588.873206: Line 40: Invalid configuration line 'HT_OpMode=1'. 1238343588.873235: Line 41: Invalid configuration line 'HT_MpduDensity=4'. 1238343588.873262: Line 42: Invalid configuration line 'HT_BW=1'. 1238343588.873290: Line 43: Invalid configuration line 'HT_AutoBA=1'. 1238343588.873317: Line 44: Invalid configuration line 'HT_BADecline=0'. 1238343588.873344: Line 45: Invalid configuration line 'HT_AMSDU=0'. 1238343588.873373: Line 46: Invalid configuration line 'HT_BAWinSize=64'. 1238343588.873400: Line 47: Invalid configuration line 'HT_GI=1'. 1238343588.873428: Line 48: Invalid configuration line 'HT_MCS=33'. 1238343588.873455: Line 49: Invalid configuration line 'HT_MIMOPSMode=3'. 1238343588.873483: Line 50: Invalid configuration line 'IEEE80211H=0'. 1238343588.873510: Line 51: Invalid configuration line 'TGnWifiTest=0'. 1238343588.873537: Line 52: Invalid configuration line 'WirelessEvent=0'. 1238343588.873564: Line 53: Invalid configuration line 'CarrierDetect=0'. 1238343588.873702: Failed to read or parse configuration '/etc/Wireless/RT2860STA.dat'. 1238343588.873739: Failed to add interface ra0 1238343588.873834: Cancelling scan request 1238343588.873867: Cancelling authentication timeout EEEPC-901-ROB:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c11 --- Comment #11 from Robby Verberne <monkey9@iae.nl> 2009-03-29 10:53:27 MDT --- So this has to be a preinstalled config, that should have been overwritten, but it hasn't, because the path is wrongly implemented? How can i manualy change this path, to overwrite this file? Or do you have a useble answer? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User hschaa@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c12 --- Comment #12 from Helmut Schaa <hschaa@novell.com> 2009-03-30 01:22:54 MDT --- (In reply to comment #10)
EEEPC-901-ROB:/home/oddball # wpa_supplicant -Dwext -ira0 -c/etc/Wireless/RT2860STA.dat -dddt
That seems incorrect to me. I doubt that /etc/Wireless/RT2860STA.dat is a wpa_supplicant configuration file. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c13 --- Comment #13 from Robby Verberne <monkey9@iae.nl> 2009-03-30 01:50:43 MDT --- you mean how should the command be? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User hschaa@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c14 --- Comment #14 from Helmut Schaa <hschaa@novell.com> 2009-03-30 02:02:04 MDT --- You first have to write a supplicant configuration file as described at [1] and use this file as -c/xxx parameter. However, I guess it would be much simpler to just turn on wpa_supplicant debug (also described at [1]) and try to set the connection up using NetworkManager. [1] http://en.opensuse.org/Tracking_down_wireless_problems -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c15 --- Comment #15 from Robby Verberne <monkey9@iae.nl> 2009-03-30 04:02:48 MDT --- I do not fully understand: i am able to set up a connection manualy. How to do this automaticly? because if i close the terminal window, the connection is gone. i am using no protection on linksys now, because i first want the connection works automaticly. this works: EEEPC-901-ROB:/home/oddball # iwconfig ra0 essid linksys EEEPC-901-ROB:/home/oddball # ifconfig ra0 up EEEPC-901-ROB:/home/oddball # iwlist ra0 scan ra0 Scan completed : Cell 01 - Address: 00:1E:E5:70:49:B8 ESSID:"linksys" Mode:Managed Channel:11 Quality:100/100 Signal level:-37 dBm Noise level:-97 dBm Encryption key:off Bit Rates:36 Mb/s Cell 02 - Address: 00:1C:10:66:4B:A7 ESSID:"linksys" Mode:Managed Channel:11 Quality:70/100 Signal level:-62 dBm Noise level:-97 dBm Encryption key:off Bit Rates:11 Mb/s EEEPC-901-ROB:/home/oddball # dhcpcd ra0 err, ra0: dhcpcd already running on pid 8217 (/var/run/dhcpcd-ra0.pid) EEEPC-901-ROB:/home/oddball # ifconfig ra0 ra0 Link encap:Ethernet HWaddr 00:22:43:45:EF:C9 inet addr:192.168.1.113 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::222:43ff:fe45:efc9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3887 errors:0 dropped:0 overruns:0 frame:0 TX packets:9450 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:319796 (312.3 Kb) TX bytes:0 (0.0 b) Interrupt:19 EEEPC-901-ROB:/home/oddball # ping google.com PING google.com (74.125.67.100) 56(84) bytes of data. 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=1 ttl=239 time=110 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=2 ttl=239 time=110 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=3 ttl=239 time=110 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=4 ttl=239 time=109 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=5 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c16 --- Comment #16 from Robby Verberne <monkey9@iae.nl> 2009-03-30 04:10:23 MDT --- now i closed the konsole window, and the connection stays up. i can r5each every webpage now. How to get this automaticly? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c17 --- Comment #17 from Robby Verberne <monkey9@iae.nl> 2009-03-31 03:09:31 MDT --- Well, there is something spooky about this eee-pc-901. How easy to set up the wifi yesterday, so difficult today.. I don't get an ip address, and if i get one it is ipv4ll. EEEPC-901-ROB:/home/oddball # kill pid 4738 bash: kill: pid: arguments must be process or job IDs EEEPC-901-ROB:/home/oddball # dhcpcd ra0 err, ra0: timed out err, ra0: lease expired 239414 seconds ago warn, ra0: using IPV4LL address 169.254.91.249 EEEPC-901-ROB:/home/oddball # ifconfig ra0 ra0 Link encap:Ethernet HWaddr 00:22:43:45:EF:C9 inet addr:169.254.91.249 Bcast:169.254.255.255 Mask:255.255.0.0 inet6 addr: fe80::222:43ff:fe45:efc9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4208 errors:0 dropped:0 overruns:0 frame:0 TX packets:10017 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:343140 (335.0 Kb) TX bytes:0 (0.0 b) Interrupt:19 With this address i do not have a valid connection to refresh websites. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c18 --- Comment #18 from Robby Verberne <monkey9@iae.nl> 2009-03-31 03:17:14 MDT --- Calling iwconfig however shows no associated access point, or is this normal? EEEPC-901-ROB:/home/oddball # dhcpcd ra0 err, ra0: timed out warn, ra0: using IPV4LL address 169.254.91.249 EEEPC-901-ROB:/home/oddball # iwconfig lo no wireless extensions. eth0 no wireless extensions. ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA" Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:1 Mb/s RTS thr:off Fragment thr:off Encryption key:off Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 EEEPC-901-ROB:/home/oddball # (In reply to comment #14)
You first have to write a supplicant configuration file as described at [1] and use this file as -c/xxx parameter. However, I guess it would be much simpler to just turn on wpa_supplicant debug (also described at [1]) and try to set the connection up using NetworkManager.
network manager allways complains about no network, or no wavelan. But ok, i will turn on the -dddt. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c19 --- Comment #19 from Robby Verberne <monkey9@iae.nl> 2009-03-31 04:05:53 MDT --- I'll be damned! You have no idea how stupid i feel! Now it imediately worked, and after configuring auto-connect it did after reboot. I get realy frustrated by stuff like this.. ;) Maybe fiddling around on the cli changed something, i don't know. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=488563 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=488563#c20 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |FIXED --- Comment #20 from Robby Verberne <monkey9@iae.nl> 2009-04-01 01:55:04 MDT --- i tried the connection for about 24h, and shutted down several times. It comes up, but not completely, i have to open connections and edit, save & connect, and than it is completely there. But at least it works... As you might have noticed, the second install worked more easy as the first. This install i am using as default now, and have costumized it to my needs. For now this can be closed. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com