[Bug 440928] New: After wireless update to Factory 11.1B4, no configuration found for wlan.
https://bugzilla.novell.com/show_bug.cgi?id=440928 Summary: After wireless update to Factory 11.1B4, no configuration found for wlan. Product: openSUSE 11.1 Version: Beta4 Platform: 32bit OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: monkey9@iae.nl QAContact: qa@suse.de Found By: Beta-Customer Ifup nor nm are able to set up wireless. 2 days ago, i installed 11. with the netinstall cd, which setted-up the wlan-card without any problems, and performed the network-installation without any error wse. The same set-up was used to update to Factory 11.1B4. After rebooting the wireless was gone, not to be configuered. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User meissner@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c1 Marcus Meissner <meissner@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #1 from Marcus Meissner <meissner@novell.com> 2008-11-02 14:55:29 MDT --- what card, hwinfo --netcard in 11.0 and 11.1beta4 please -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c2 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #2 from Robby Verberne <monkey9@iae.nl> 2008-11-02 15:07:49 MDT --- the card is seen as Atheros: AR5212/AR5213, and has worked since 10.0 on this machine wap wse. Is there a way to retrieve this info after updating? Anyway, this is the info from 11.1B4 ARM500-sfn6:/home/oddball # hwinfo --netcard 18: PCI 09.0: 0200 Ethernet controller [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_8086_1229 Unique ID: rBUF.Sdgu3RKCCy9 SysFS ID: /devices/pci0000:00/0000:00:09.0 SysFS BusID: 0000:00:09.0 Hardware Class: network Model: "Intel EtherExpress PRO/100+ MiniPCI" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1229 "82557/8/9/0/1 Ethernet Pro 100" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x2204 "EtherExpress PRO/100+ MiniPCI" Revision: 0x09 Driver: "e100" Driver Modules: "e100" Device File: eth0 Memory Range: 0x41280000-0x41280fff (rw,non-prefetchable) I/O Ports: 0x3440-0x347f (rw) Memory Range: 0x41200000-0x4121ffff (rw,non-prefetchable) Memory Range: 0x41500000-0x415fffff (ro,prefetchable,disabled) IRQ: 11 (19851 events) HW Address: 00:d0:59:9c:4a:12 Link detected: yes Module Alias: "pci:v00008086d00001229sv00008086sd00002204bc02sc00i00" Driver Info #0: Driver Status: e100 is active Driver Activation Cmd: "modprobe e100" Driver Info #1: Driver Status: eepro100 is not active Driver Activation Cmd: "modprobe eepro100" Config Status: cfg=no, avail=yes, need=no, active=unknown 21: PCI 200.0: 0200 Ethernet controller [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_168c_13 Unique ID: 2nea.NeNIGcJQZvF Parent ID: 8otl.+rVhPC2vpUF SysFS ID: /devices/pci0000:00/0000:00:04.0/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Atheros AR5212/AR5213 Multiprotocol MAC/baseband processor" Vendor: pci 0x168c "Atheros Communications, Inc." Device: pci 0x0013 "AR5212/AR5213 Multiprotocol MAC/baseband processor" SubVendor: pci 0x16ab "Global Sun Technology Inc" SubDevice: pci 0x7101 Revision: 0x01 Driver: "ath5k_pci" Driver Modules: "ath5k" Device File: wmaster0 Memory Range: 0x34000000-0x3400ffff (rw,non-prefetchable) IRQ: 11 (19851 events) HW Address: 00:03:2f:18:6a:9d Link detected: yes Module Alias: "pci:v0000168Cd00000013sv000016ABsd00007101bc02sc00i00" Driver Info #0: Driver Status: ath5k is active Driver Activation Cmd: "modprobe ath5k" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #11 (CardBus bridge) ARM500-sfn6:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c3 --- Comment #3 from Robby Verberne <monkey9@iae.nl> 2008-11-02 15:11:41 MDT --- http://www.smolts.org/show?uuid=pub_012aaa43-fb5c-4f80-b7a4-c2a467607ef6 Results of using the new smolts module ;) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 Andreas Jaeger <aj@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team-screening@forge.provo.novell.com |hschaa@novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c4 --- Comment #4 from Robby Verberne <monkey9@iae.nl> 2008-11-07 02:03:14 MST --- Today i used the dvd and did a new install. Hardware detection found the right card, and installed the right driver. Somehow the configuration did not get saved, or is misplaced. The yast2 network module is definetely briken, because everything entered manualy, does not get saved also. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User suse-list3@bout-tyme.net added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c5 --- Comment #5 from Ken Schneider <suse-list3@bout-tyme.net> 2008-11-07 08:56:08 MST --- Created an attachment (id=250709) --> (https://bugzilla.novell.com/attachment.cgi?id=250709) YaST2 log files from Ken These are the y2log files from Ken Card info: 21: PCI 0a.0: 0200 Ethernet controller [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_10de_54c Unique ID: rBUF.Qh8YuQ9wg77 SysFS ID: /devices/pci0000:00/0000:00:0a.0 SysFS BusID: 0000:00:0a.0 Hardware Class: network Model: "nVidia MCP67 Ethernet" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x054c "MCP67 Ethernet" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x30cf Revision: 0xa2 Driver: "forcedeth" Driver Modules: "forcedeth" Device File: eth0 Memory Range: 0xf2588000-0xf2588fff (rw,non-prefetchable) I/O Ports: 0x30f8-0x30ff (rw) Memory Range: 0xf2589c00-0xf2589cff (rw,non-prefetchable) Memory Range: 0xf2589800-0xf258980f (rw,non-prefetchable) IRQ: 220 (16922354 events) HW Address: 00:1e:68:a5:f9:ea Link detected: yes Module Alias: "pci:v000010DEd0000054Csv0000103Csd000030CFbc02sc00i00" Driver Info #0: Driver Status: forcedeth is active Driver Activation Cmd: "modprobe forcedeth" Config Status: cfg=no, avail=yes, need=no, active=unknown 34: PCI 300.0: 0280 Network controller [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_14e4_4328 Unique ID: svHJ.XEGEu1Nec22 Parent ID: qnJ_.iXEd68VX6l3 SysFS ID: /devices/pci0000:00/0000:00:0d.0/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: network Model: "Broadcom BCM4328 802.11a/b/g/n" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x4328 "BCM4328 802.11a/b/g/n" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x1366 Revision: 0x03 Driver: "b43-pci-bridge" Driver Modules: "ssb" Memory Range: 0xf2200000-0xf2203fff (rw,non-prefetchable) Memory Range: 0xf2000000-0xf20fffff (rw,prefetchable) IRQ: 10 (913 events) Module Alias: "pci:v000014E4d00004328sv0000103Csd00001366bc02sc80i00" Driver Info #0: Driver Status: ssb is active Driver Activation Cmd: "modprobe ssb" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #23 (PCI bridge) 42: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_7d1_3c04_noserial_if0 Unique ID: KRJj.siZwOOFHzW4 Parent ID: uIhY.OqydEZZ981A SysFS ID: /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.0 SysFS BusID: 3-1:1.0 Hardware Class: unknown Model: "D-Link 802.11 bg WLAN" Hotplug: USB Vendor: usb 0x07d1 "D-Link System" Device: usb 0x3c04 "802.11 bg WLAN" Revision: "0.01" Driver: "rt73usb" Driver Modules: "rt73usb" Device File: wmaster0 Speed: 480 Mbps HW Address: 00:1e:58:b4:04:a7 Module Alias: "usb:v07D1p3C04d0001dc00dsc00dp00icFFiscFFipFF" Driver Info #0: Driver Status: rt73usb is active Driver Activation Cmd: "modprobe rt73usb" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #37 (Hub) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c6 --- Comment #6 from Robby Verberne <monkey9@iae.nl> 2008-11-09 10:47:36 MST --- Created an attachment (id=250917) --> (https://bugzilla.novell.com/attachment.cgi?id=250917) yast2.tar.bz2 M9, oddball, Robby Verberne -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c7 --- Comment #7 from Robby Verberne <monkey9@iae.nl> 2008-11-10 13:31:35 MST --- OS: Linux 2.6.27.5-1-default x86_64 Huidige gebruiker: oddball@AMD64x2-sfn1 Systeem: openSUSE 11.1 Beta 4.6 (x86_64) KDE: 4.1.3 (KDE 4.1.3) "release 1.3" rebooted after update: same problem. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c8 --- Comment #8 from Robby Verberne <monkey9@iae.nl> 2008-11-10 13:34:10 MST --- Created an attachment (id=251144) --> (https://bugzilla.novell.com/attachment.cgi?id=251144) Yast log Rob Verberne -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c9 --- Comment #9 from Robby Verberne <monkey9@iae.nl> 2008-11-10 13:36:23 MST --- AMD64x2-sfn1:/home/oddball # hwinfo --netcard 18: PCI 07.0: 0200 Ethernet controller [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_10de_3ef Unique ID: rBUF.8HRP6WtuM8E SysFS ID: /devices/pci0000:00/0000:00:07.0 SysFS BusID: 0000:00:07.0 Hardware Class: network Model: "nVidia MCP61 Ethernet" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x03ef "MCP61 Ethernet" SubVendor: pci 0x1019 "Elitegroup Computer Systems" SubDevice: pci 0x2609 Revision: 0xa2 Driver: "forcedeth" Driver Modules: "forcedeth" Device File: eth0 Memory Range: 0xfe02d000-0xfe02dfff (rw,non-prefetchable) I/O Ports: 0xec00-0xec07 (rw) IRQ: 4348 (114865 events) HW Address: 00:1b:b9:c9:34:4c Link detected: yes Module Alias: "pci:v000010DEd000003EFsv00001019sd00002609bc06sc80i00" Driver Info #0: Driver Status: forcedeth is active Driver Activation Cmd: "modprobe forcedeth" Driver Info #1: Driver Status: isp1760 is active Driver Activation Cmd: "modprobe isp1760" Config Status: cfg=no, avail=yes, need=no, active=unknown AMD64x2-sfn1:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User hschaa@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c10 Helmut Schaa <hschaa@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #10 from Helmut Schaa <hschaa@novell.com> 2008-11-13 07:27:39 MST --- Robby, could you elaborate the problem a bit more? Is the device not even detected (by NM or by Yast)? Are you unable to get a connection? If yes, which method did you use? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c11 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #11 from Robby Verberne <monkey9@iae.nl> 2008-11-13 08:20:55 MST --- It is detected by yast and NM, but there is no configuration saved, and all that i want to save manualy, is gone when i open it again in yast. Because it is not working, nm detects no wave. Ifup does not work, not with the wired interface, and the wireless one. NM only can use the wired connection, but cant detect the wave. So with knm there is only wired connection, with ifup: none. gnm, i did not try. Every start-up, the device is detected, and the right driver is present, but the configuration does not get saved, and thus cannot be used. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 Helmut Schaa <hschaa@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P4 - Low -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c12 --- Comment #12 from Robby Verberne <monkey9@iae.nl> 2008-11-21 08:13:05 MST --- In OS: Linux 2.6.27.5-3-pae i686 Huidige gebruiker: oddball@ARM500-sfn7 Systeem: openSUSE 11.1 Beta 5.2 (i586) KDE: 4.1.3 (KDE 4.1.3) "release 2.3" Something has been improved. The device and driver are recognised in yast, the config can be made sofar, that the network can be scanned and the networkname can be found. These facts are also saved. But somehow there seems not to be negotiated between the router and the wifi device. ifup does not finish a working wlan. Knm only succeeds to connect the wired interface... so still no wireless..helas. If anyone needs some info,please tell me what, i would very much appreciate a working wifi.. ;) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User elchevive68@gmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c13 Luiz Fernando Ranghetti <elchevive68@gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |elchevive68@gmail.com --- Comment #13 from Luiz Fernando Ranghetti <elchevive68@gmail.com> 2008-11-21 09:24:43 MST --- Hi, I had to create a new connection (wlan0) for me to work, besides the Atheros card being showed in YaST (but I cannot edit this) Regards -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c14 --- Comment #14 from Robby Verberne <monkey9@iae.nl> 2008-11-21 10:05:45 MST --- Do you mean that you have wireless now? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User elchevive68@gmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c15 --- Comment #15 from Luiz Fernando Ranghetti <elchevive68@gmail.com> 2008-11-21 10:11:25 MST --- Yes, but mine card is a bit different that yours (AR242) and to have ifup working I had to create a new wireless device in YaST to be able to edit the ifup settings... Regards -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User hschaa@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c16 Helmut Schaa <hschaa@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #16 from Helmut Schaa <hschaa@novell.com> 2008-11-21 12:42:56 MST --- Robby, please attach the output of dmesg after issuing "ifup wlan0" and waiting for some seconds. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c17 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #17 from Robby Verberne <monkey9@iae.nl> 2008-11-21 12:48:53 MST --- ARM500-sfn7:/home/oddball # ifup wlan0 wlan0 device: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01) wlan0 warning: using NO encryption command 'iwconfig wlan0 nick ARM500-sfn7' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device wlan0 ; Operation not supported. Starting DHCP4 client on wlan0. . . . . . . . wlan0 DHCP4 continues in background ARM500-sfn7:/home/oddball # dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.5-3-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-11-13 09:33:41 +0100 PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3800 (reserved) BIOS-e820: 000000001fff3800 - 0000000020000000 (ACPI NVS) last_pfn = 0x1fff0 max_arch_pfn = 0x1000000 kernel direct mapping tables up to 1fff0000 @ 7000-d000 RAMDISK: 1fa43000 - 1ffdf196 DMI 2.3 present. ACPI: RSDP 000F9970, 0014 (r0 COMPAQ) ACPI: RSDT 1FFF476D, 002C (r1 COMPAQ RSDTBL 1 CPQ 1) ACPI: FACP 1FFF4828, 0074 (r1 COMPAQ CPQB151 20010721 CPQ 1) ACPI: DSDT 1FFF48A0, 6886 (r1 COMPAQ ARMADAE7 10000 MSFT 100000C) ACPI: FACS 1FFFFE80, 0040 ACPI: SSDT 1FFF4799, 008F (r1 COMPAQ CPQGysr 1001 MSFT 100000C) NUMA - single node, flat memory mode Node: 0, start_pfn: 0, end_pfn: 1fff0 Setting physnode_map array to node 0 for pfns: 0 4000 8000 c000 10000 14000 18000 1c000 node 0 pfn: [0 - 1fff0] Reserving 1536 pages of KVA for lmem_map of node 0 at 1f400 remove_active_range (0, 128000, 129536) Reserving total of 600 pages for numa KVA remap kva_start_pfn ~ 1ee00 max_low_pfn ~ 1fff0 max_pfn = 1fff0 0MB HIGHMEM available. 511MB LOWMEM available. max_low_pfn = 1fff0, highstart_pfn = 1fff0 Low memory ends at vaddr dfff0000 node 0 will remap to vaddr dee00000 - df400000 allocate_pgdat: node 0 NODE_DATA dee00000 remap_numa_kva: node 0 remap_numa_kva: dee00000 to pfn 0001f400 remap_numa_kva: df000000 to pfn 0001f600 remap_numa_kva: df200000 to pfn 0001f800 High memory starts at vaddr dfff0000 mapped low ram: 0 - 1fff0000 low ram: 00000000 - 1fff0000 bootmap 00002000 - 00006000 (11 early reservations) ==> bootmem [0000000000 - 001fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000067651c] TEXT DATA BSS ==> [0000100000 - 000067651c] #4 [001fa43000 - 001ffdf196] RAMDISK ==> [001fa43000 - 001ffdf196] #5 [0000677000 - 000067f000] INIT_PG_TABLE ==> [0000677000 - 000067f000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #7 [0000007000 - 000000c000] PGTABLE ==> [0000007000 - 000000c000] #8 [001f400000 - 001fa00000] KVA RAM ==> [001f400000 - 001fa00000] #9 [001ee00000 - 001f400000] KVA PG ==> [001ee00000 - 001f400000] #10 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001fff0 HighMem 0x0001fff0 -> 0x0001fff0 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0001f400 0: 0x0001fa00 -> 0x0001fff0 On node 0 totalpages: 129423 free_area_init_node: node 0, pgdat dee00000, node_mem_map dee02000 DMA zone: 3963 pages, LIFO batch:0 Normal zone: 124308 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x5008 SMP: Allowing 1 CPUs, 0 hotplug CPUs Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (01002000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000) PERCPU: Allocating 40092 bytes of per cpu data NR_CPUS: 128, nr_cpu_ids: 1, nr_node_ids 8 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128271 Policy zone: Normal Kernel command line: resume=/dev/disk/by-id/ata-IC25N020ATDA04-0_63A63LS6600-part5 splash=silent vga=0x317 bootsplash: silent mode. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PMTIMER calibration value Detected 896.093 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Initializing HighMem for node 0 (00000000:00000000) Memory: 499668k/524224k available (2427k kernel code, 24164k reserved, 1969k data, 328k init, 0k highmem) virtual kernel memory layout: fixmap : 0xff8b6000 - 0xfffff000 (7460 kB) pkmap : 0xff400000 - 0xff600000 (2048 kB) vmalloc : 0xe0800000 - 0xff3fe000 ( 491 MB) lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) .init : 0xc0552000 - 0xc05a4000 ( 328 kB) .data : 0xc035edab - 0xc054b1f8 (1969 kB) .text : 0xc0100000 - 0xc035edab (2427 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay loop (skipped), value calculated using timer frequency.. 1792.18 BogoMIPS (lpj=3584372) kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved Security Framework initialized SELinux: Disabled at boot. AppArmor: AppArmor initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed ACPI: Core revision 20080609 ACPI: Checking initramfs for custom DSDT Parsing all Control Methods: Table [DSDT](id 0001) - 614 Objects with 75 Devices 173 Methods 25 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 3 Objects with 0 Devices 1 Methods 0 Regions tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired ACPI: setting ELCR to 0200 (from 0800) evxfevnt-0091 [00] enable : Transition to ACPI mode successful weird, boot CPU (#0) not listedby the BIOS. SMP motherboard not detected. Mapping cpu 0 to node 0 Local APIC not detected. Using dummy APIC emulation. SMP disabled Mapping cpu 0 to node 0 Brought up 1 CPUs Total of 1 processors activated (1792.18 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0 level CPU groups: 0 net_namespace: 1044 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0478, last bus=1 PCI: Using configuration type 1 for base access perfmon: version 2.82 perfmon: CPU hotplug support enabled evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:................................................................ Initialized 18/25 Regions 0/0 Fields 18/19 Buffers 28/35 Packages (626 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:...... Executed 6 _INI methods requiring 2 _STA executions (examined 79 objects) evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 2 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [C005] (0000:00) PCI: 0000:00:00.0 reg 10 32bit mmio: [50000000, 53ffffff] PCI: 0000:00:04.0 reg 10 32bit mmio: [41100000, 41100fff] pci 0000:00:04.0: supports D1 pci 0000:00:04.0: supports D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:04.0: PME# disabled PCI: 0000:00:04.1 reg 10 32bit mmio: [41180000, 41180fff] pci 0000:00:04.1: supports D1 pci 0000:00:04.1: supports D2 pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot pci 0000:00:04.1: PME# disabled PCI: 0000:00:07.1 reg 20 io port: [3420, 342f] PCI: 0000:00:07.2 reg 20 io port: [3400, 341f] pci 0000:00:07.3: quirk: region 5000-503f claimed by PIIX4 ACPI pci 0000:00:07.3: quirk: region 4000-400f claimed by PIIX4 SMB pci 0000:00:07.3: PIIX4 devres C PIO at 0100-0107 pci 0000:00:07.3: PIIX4 devres I PIO at 00e0-00e3 pci 0000:00:07.3: PIIX4 devres J PIO at 00f8-00fb PCI: 0000:00:08.0 reg 10 io port: [3000, 30ff] pci 0000:00:08.0: supports D1 pci 0000:00:08.0: supports D2 pci 0000:00:08.0: PME# supported from D1 D2 D3hot pci 0000:00:08.0: PME# disabled PCI: 0000:00:09.0 reg 10 32bit mmio: [41280000, 41280fff] PCI: 0000:00:09.0 reg 14 io port: [3440, 347f] PCI: 0000:00:09.0 reg 18 32bit mmio: [41200000, 4121ffff] PCI: 0000:00:09.0 reg 30 32bit mmio: [0, fffff] pci 0000:00:09.0: supports D1 pci 0000:00:09.0: supports D2 pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.0: PME# disabled PCI: 0000:00:09.1 reg 10 io port: [3430, 3437] PCI: 0000:00:09.1 reg 14 32bit mmio: [41300000, 41300fff] pci 0000:00:09.1: supports D1 pci 0000:00:09.1: supports D2 pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.1: PME# disabled PCI: 0000:01:00.0 reg 10 32bit mmio: [40000000, 40ffffff] PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff] PCI: 0000:01:00.0 reg 18 32bit mmio: [41000000, 41000fff] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 PCI: bridge 0000:00:01.0 io port: [2000, 2fff] PCI: bridge 0000:00:01.0 32bit mmio: [40000000, 410fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C005._PRT] ACPI: PCI Interrupt Link [C142] (IRQs *11) ACPI: PCI Interrupt Link [C148] (IRQs 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs *11) ACPI: PCI Interrupt Link [C14A] (IRQs *11) ACPI: Power Resource [C129] (on) ACPI: Power Resource [C0DB] (on) ACPI: Power Resource [C15F] (off) ACPI: Power Resource [C161] (off) ACPI: Power Resource [C163] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0d: mem resource (0xd1800-0xd3fff) overlaps 0000:00:09.0 BAR 6 (0x0-0xfffff), disabling pnp 00:0e: mem resource (0x0-0x9ffff) overlaps 0000:00:09.0 BAR 6 (0x0-0xfffff), disabling pnp 00:0e: mem resource (0xf0000-0xfffff) overlaps 0000:00:09.0 BAR 6 (0x0-0xfffff), disabling pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing AppArmor: AppArmor Filesystem Enabled ACPI: RTC can wake from S4 system 00:0c: ioport range 0x4d0-0x4d1 has been reserved system 00:0c: ioport range 0x800-0x87f has been reserved system 00:0c: ioport range 0x4000-0x400f has been reserved system 00:0c: ioport range 0x5000-0x5063 could not be reserved system 00:0c: ioport range 0x6004-0x6005 has been reserved system 00:0c: ioport range 0xf000-0xf0cf has been reserved system 00:0d: iomem range 0xfff80000-0xffffffff has been reserved system 00:0e: iomem range 0x100000-0x1fffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0x40000000-0x410fffff pci 0000:00:01.0: PREFETCH window: 0x00000041400000-0x000000414fffff pci 0000:00:04.0: CardBus bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: 0x001000-0x0010ff pci 0000:00:04.0: IO window: 0x001400-0x0014ff pci 0000:00:04.0: PREFETCH window: 0x30000000-0x33ffffff pci 0000:00:04.0: MEM window: 0x34000000-0x37ffffff pci 0000:00:04.1: CardBus bridge, secondary bus 0000:06 pci 0000:00:04.1: IO window: 0x001800-0x0018ff pci 0000:00:04.1: IO window: 0x001c00-0x001cff pci 0000:00:04.1: PREFETCH window: 0x38000000-0x3bffffff pci 0000:00:04.1: MEM window: 0x3c000000-0x3fffffff ACPI: PCI Interrupt Link [C142] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:00:04.0: PCI INT A -> Link[C142] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:04.1: PCI INT A -> Link[C142] -> GSI 11 (level, low) -> IRQ 11 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [2000, 2fff] bus: 01 index 1 mmio: [40000000, 410fffff] bus: 01 index 2 mmio: [41400000, 414fffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [1000, 10ff] bus: 02 index 1 io port: [1400, 14ff] bus: 02 index 2 mmio: [30000000, 33ffffff] bus: 02 index 3 mmio: [34000000, 37ffffff] bus: 06 index 0 io port: [1800, 18ff] bus: 06 index 1 io port: [1c00, 1cff] bus: 06 index 2 mmio: [38000000, 3bffffff] bus: 06 index 3 mmio: [3c000000, 3fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs...<7>Switched to high resolution mode on CPU 0 done Freeing initrd memory: 5744k freed Machine check exception polling timer started. audit: initializing netlink socket (disabled) type=2000 audit(1227298160.340:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 246 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) perfmon: added sampling format default pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:09.0: Firmware left e100 interrupts enabled; disabling pci 0000:01:00.0: Boot video device vesafb: framebuffer at 0x40000000, mapped to 0xe0880000, using 6144k, total 8128k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:5074 vesafb: pmi: set display start = c00c50cc, set palette = c00c5126 vesafb: pmi: ports = 2085 201f 20b4 20b8 2018 2014 20c0 20c3 20c1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 166113 bytes bootsplash: ...found (1024x768, 154167 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver8 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [C149] enabled at IRQ 11 serial 0000:00:09.1: PCI INT A -> Link[C149] -> GSI 11 (level, low) -> IRQ 11 PNP: PS/2 Controller [PNP0303:C0D8,PNP0f0e:C0D9] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.0. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 328k freed Write protecting the kernel text: 2428k Write protecting the kernel read-only data: 1788k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [C0B4] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [C15E] (36 C) Uniform Multi-Platform E-IDE driver piix 0000:00:07.1: IDE controller (0x8086:0x7111 rev 0x01) piix 0000:00:07.1: IDE port disabled piix 0000:00:07.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3420-0x3427 Probing IDE interface ide0... Marking TSC unstable due to TSC halts in idle Clocksource tsc unstable (delta = -141086951 ns) hda: IC25N020ATDA04-0, ATA DISK drive Synaptics Touchpad, model: 1, fw: 5.1, id: 0x1640b1, caps: 0x804713/0x0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1 hdb: Toshiba DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ACPI: ACPI Dock Station Driver: 1 docks/bays found SCSI subsystem initialized libata version 3.00 loaded. ACPI: Transitioning device [C15D] to D3 fan PNP0C0B:00: registered as cooling_device1 ACPI: Fan [C15D] (off) ACPI: Transitioning device [C160] to D3 fan PNP0C0B:01: registered as cooling_device2 ACPI: Fan [C160] (off) ACPI: Transitioning device [C162] to D3 fan PNP0C0B:02: registered as cooling_device3 ACPI: Fan [C162] (off) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found udevd version 128 started hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63 hda: cache flushes not supported hda:<6>: usbcore: registered new interface driver usbfs hda1 hda2 <<6>: usbcore: registered new interface driver hub hda5<6>: usbcore: registered new device driver usb hda6<6>USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [C14A] enabled at IRQ 11 uhci_hcd 0000:00:07.2: PCI INT D -> Link[C14A] -> GSI 11 (level, low) -> IRQ 11 hda7 > uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x00003400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.5-3-pae uhci_hcd usb usb1: SerialNumber: 0000:00:07.2 PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. JBD: barrier-based sync failed on hda6 - disabling barriers udevd version 128 started input: PC Speaker as /devices/platform/pcspkr/input/input2 Linux agpgart interface v0.103 parport_pc 00:04: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] JBD: barrier-based sync failed on hda6 - disabling barriers pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button (FF) [PWRF] ACPI: Battery Slot [C0FE] (battery present) agpgart-intel 0000:00:00.0: Intel 440BX Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x50000000 ACPI: Battery Slot [C0FF] (battery absent) ACPI: Battery Slot [C100] (battery absent) input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 hdb: ATAPI 24X DVD-ROM drive, 192kB Cache Uniform CD-ROM driver Revision: 3.20 ACPI: Sleep Button (CM) [C057] ACPI: AC Adapter [C0F6] (on-line) request region #1 isp1760: probe of 0000:00:07.3 failed with error -16 input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 ACPI: Lid Switch [C16B] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:00:09.0: PCI INT A -> Link[C149] -> GSI 11 (level, low) -> IRQ 11 e100 0000:00:09.0: PME# disabled rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 : rtc0: alarms up to one month, y3k e100: eth0: e100_probe: addr 0x41280000, irq 11, MAC addr 00:d0:59:9c:4a:12 Yenta: CardBus bridge found at 0000:00:04.0 [0e11:b121] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.0, mfunc 0x01001c72, devctl 0x64 NET: Registered protocol family 23 found SMC SuperIO Chip (devid=0x0a rev=00 base=0x00e0): FDC37N971 smsc_ircc_present: can't get sir_base of 0x3e8 Yenta: ISA IRQ mask 0x0438, PCI irq 11 Socket status: 30000020 Yenta: CardBus bridge found at 0000:00:04.1 [0e11:b121] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.1, mfunc 0x01001c72, devctl 0x64 ppdev: user-space parallel port driver Yenta TI: socket 0000:00:04.1 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:00:04.1 parallel PCI interrupts ok Yenta: ISA IRQ mask 0x0438, PCI irq 11 Socket status: 30000006 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x4000, revision 0 ES1968 (ESS Maestro) 0000:00:08.0: PCI INT A -> Link[C149] -> GSI 11 (level, low) -> IRQ 11 pccard: CardBus card inserted into slot 0 PCI: 0000:02:00.0 reg 10 32bit mmio: [0, ffff] es1968: clocking to 48000 Linux video capture interface: v2.00 ath5k_pci 0000:02:00.0: enabling device (0000 -> 0002) ath5k_pci 0000:02:00.0: PCI INT A -> Link[C142] -> GSI 11 (level, low) -> IRQ 11 ath5k_pci 0000:02:00.0: registered as 'phy0' phy0: Selected rate control algorithm 'pid' cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0xa00-0xaff: clean. ath5k phy0: Atheros AR5213 chip found (MAC: 0x56, PHY: 0x41) ath5k phy0: RF5111 5GHz radio found (0x17) ath5k phy0: RF2111 2GHz radio found (0x23) cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. Adding 778608k swap on /dev/hda5. Priority:-1 extents:1 across:778608k device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.9) type=1505 audit(1227294592.406:2): operation="profile_load" name="/bin/ping" name2="default" pid=1651 type=1505 audit(1227294592.938:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1713 type=1505 audit(1227294593.694:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1742 type=1505 audit(1227294594.570:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1743 type=1505 audit(1227294595.322:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1745 type=1505 audit(1227294596.030:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1746 type=1505 audit(1227294596.710:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1747 type=1505 audit(1227294597.622:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1748 type=1505 audit(1227294599.198:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1749 type=1505 audit(1227294599.890:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1750 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team powernow: This module only works with AMD K7 CPUs ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (8192 buckets, 32768 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready NET: Registered protocol family 17 JBD: barrier-based sync failed on hda7 - disabling barriers e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=263 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=243 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=492 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=472 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=62 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=42 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=492 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=472 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=492 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=472 eth0: no IPv6 routers present SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=62 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=42 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=62 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=42 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=62 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=42 e100: eth0: e100_watchdog: link down e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=62 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=42 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=263 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=243 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=492 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=472 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=492 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=472 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=492 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=472 ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP ff:ff:ff:ff:ff:ff wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authentication with AP 00:1e:e5:70:49:b8 timed out eth0: no IPv6 routers present e100: eth0: e100_watchdog: link down ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready ADDRCONF(NETDEV_UP): eth0: link is not ready wlan0: authenticate with AP 00:1e:e5:70:49:b8 ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authentication with AP 00:1e:e5:70:49:b8 timed out e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present e100: eth0: e100_watchdog: link down ADDRCONF(NETDEV_UP): eth0: link is not ready wlan0: authenticate with AP 00:1e:e5:70:49:b8 ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authentication with AP 00:1e:e5:70:49:b8 timed out ARM500-sfn7:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User hschaa@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c18 Helmut Schaa <hschaa@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #18 from Helmut Schaa <hschaa@novell.com> 2008-11-21 13:31:58 MST --- (In reply to comment #17 from Robby Verberne)
wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authentication with AP 00:1e:e5:70:49:b8 timed out
Here's the problem. Could you additionally please attach the output of "iwlist wlan0 scan" that shows your access point? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c19 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #19 from Robby Verberne <monkey9@iae.nl> 2008-11-22 04:22:30 MST --- ARM500-sfn7:/home/oddball # iwlist wlan0 scan wlan0 No scan results When i configure wlan in yast and scan there, it finds linksys, the accespoint. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c20 --- Comment #20 from Robby Verberne <monkey9@iae.nl> 2008-11-22 04:29:28 MST --- Created an attachment (id=254535) --> (https://bugzilla.novell.com/attachment.cgi?id=254535) wlandialog.png This is the dialogbox from kinternet, which after a scan also find nothing.., But the essid is right, but the ap mac is empty.. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User hschaa@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c21 Helmut Schaa <hschaa@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #21 from Helmut Schaa <hschaa@novell.com> 2008-11-22 05:08:11 MST --- Just a quick thought: which channel does your access point use? (In reply to comment #19 from Robby Verberne)
ARM500-sfn7:/home/oddball # iwlist wlan0 scan wlan0 No scan results
That's pretty strange! Could you please try if reloading the module helps here? Just run the following commands as root: rcnetwork stop modprobe -r ath5k dmesg -c > /dev/null modprobe ath5k ifconfig wlan0 up iwlist scan And afterwards please attach the output of dmesg here again. Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c22 --- Comment #22 from Robby Verberne <monkey9@iae.nl> 2008-11-22 05:10:14 MST --- After taking out the card and put it back in (it is pcmcia), the scan completed. ARM500-sfn7:/home/oddball # iwlist wlan0 scan wlan0 No scan results ARM500-sfn7:/home/oddball # iwlist wlan0 scan wlan0 Scan completed : Cell 01 - Address: 00:1C:10:66:4B:A7 ESSID:"linksys" Mode:Master Channel:11 Frequency:2.462 GHz (Channel 11) Quality=26/100 Signal level:-73 dBm Noiselevel=-90 dBm Encryption key:off Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Extra:tsf=0000000d327d20ca Extra: Last beacon: 124ms ago ARM500-sfn7:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c23 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #23 from Robby Verberne <monkey9@iae.nl> 2008-11-22 05:44:06 MST --- ARM500-sfn7:/home/oddball # rcnetwork stop Shutting down network interfaces: eth0 device: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09) done wlan0 device: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01) done Shutting down service network . . . . . . . .done ARM500-sfn7:/home/oddball # modprobe -r ath5k ARM500-sfn7:/home/oddball # dmesg -c > /dev/null ARM500-sfn7:/home/oddball # modprobe ath5k ARM500-sfn7:/home/oddball # ifconfig wlan0 up ARM500-sfn7:/home/oddball # iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wmaster0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: 00:1C:10:66:4B:A7 ESSID:"linksys" Mode:Master Channel:11 Frequency:2.462 GHz (Channel 11) Quality=21/100 Signal level:-77 dBm Noise level=-91 dBm Encryption key:off Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Extra:tsf=0000000d7fdaf389 Extra: Last beacon: 116ms ago ARM500-sfn7:/home/oddball # dmesg ath5k_pci 0000:02:00.0: PCI INT A -> Link[C142] -> GSI 11 (level, low) -> IRQ 11 ath5k_pci 0000:02:00.0: registered as 'phy0' phy0: Selected rate control algorithm 'pid' ath5k phy0: Atheros AR5213 chip found (MAC: 0x56, PHY: 0x41) ath5k phy0: RF5111 5GHz radio found (0x17) ath5k phy0: RF2111 2GHz radio found (0x23) ADDRCONF(NETDEV_UP): wlan0: link is not ready ARM500-sfn7:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c24 --- Comment #24 from Robby Verberne <monkey9@iae.nl> 2008-11-26 00:14:56 MST --- ARM500-sfn7:/home/oddball # dhclient wlan0 Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 /etc/dhclient.conf line 28: no option named network-number in space dhcp request subnet-mask, network-number, ^ /etc/dhclient.conf line 33: ntp-servers: expected option name. netbios-node-type, netbios-scope, ntp-servers; ^ wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:03:2f:18:6a:9d Sending on LPF/wlan0/00:03:2f:18:6a:9d Sending on Socket/fallback DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 16 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. No working leases in persistent database - sleeping. ARM500-sfn7:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c25 --- Comment #25 from Robby Verberne <monkey9@iae.nl> 2008-11-26 00:39:29 MST --- Might this be related to bug: https://bugzilla.novell.com/show_bug.cgi?id=443788 ? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User hschaa@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c26 Helmut Schaa <hschaa@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #26 from Helmut Schaa <hschaa@novell.com> 2008-11-26 01:37:51 MST --- (In reply to comment #25 from Robby Verberne)
Might this be related to bug: https://bugzilla.novell.com/show_bug.cgi?id=443788 ?
I don't think so. Could you please try if you can establish a connection manually (and attach the dmesg output for a failed attempt)? See [1] for details. [1] http://en.opensuse.org/Tracking_down_wireless_problems -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c27 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #27 from Robby Verberne <monkey9@iae.nl> 2008-11-26 03:09:33 MST --- After killing dhc, and dhcpcd wlan0, i did not get an ip address. I don't use encryption because i first want a connection. ARM500-sfn7:/home/oddball # iwlist wlan0 scan essid linksys wlan0 Scan completed : Cell 01 - Address: 00:1E:E5:70:49:B8 ESSID:"linksys" Mode:Master Channel:11 Frequency:2.462 GHz (Channel 11) Quality=39/100 Signal level:-65 dBm Noise level=-90 dBm Encryption key:off Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Extra:tsf=0000005b4f9f8052 Extra: Last beacon: 68ms ago Cell 02 - Address: 00:1C:10:66:4B:A7 ESSID:"linksys" Mode:Master Channel:11 Frequency:2.462 GHz (Channel 11) Quality=31/100 Signal level:-70 dBm Noise level=-90 dBm Encryption key:off Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Extra:tsf=0000005b4f8ca267 Extra: Last beacon: 72ms ago ARM500-sfn7:/home/oddball # ifconfig wlan0 up ARM500-sfn7:/home/oddball # iwconfig wlan0 essid linksys ARM500-sfn7:/home/oddball # iwconfig wlan0 wlan0 IEEE 802.11bg ESSID:"linksys" Mode:Managed Frequency:2.462 GHz Access Point: 00:1E:E5:70:49:B8 Bit Rate=1 Mb/s Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Power Management:off Link Quality=40/100 Signal level:-65 dBm Noise level=-91 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ARM500-sfn7:/home/oddball # ps -A | grep dhc 3206 ? 00:00:00 dhcpcd 10598 ? 00:00:00 dhclient 14427 ? 00:00:00 dhclient ARM500-sfn7:/home/oddball # kill pid 3206, 10598, 14427 bash: kill: pid: arguments must be process or job IDs bash: kill: 3206,: arguments must be process or job IDs bash: kill: 10598,: arguments must be process or job IDs ARM500-sfn7:/home/oddball # dhcpcd wlan0 err, wlan0: timed out warn, wlan0: using IPV4LL address 169.254.64.48 ARM500-sfn7:/home/oddball # dhcpcd wlan0 err, wlan0: dhcpcd already running on pid 15662 (/var/run/dhcpcd-wlan0.pid) ARM500-sfn7:/home/oddball # iwconfig wlan0 wlan0 IEEE 802.11bg ESSID:"linksys" Mode:Managed Frequency:2.462 GHz Access Point: 00:1E:E5:70:49:B8 Bit Rate=2 Mb/s Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Power Management:off Link Quality=32/100 Signal level:-70 dBm Noise level=-91 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 dmesg: (part) name="/usr/sbin/traceroute" name2="default" pid=1782 powernow: This module only works with AMD K7 CPUs e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex NET: Registered protocol family 17 NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:1c:10:66:4b:a7 wlan0: authenticate with AP 00:1c:10:66:4b:a7 wlan0: authenticated wlan0: associate with AP 00:1c:10:66:4b:a7 wlan0: associate with AP 00:1c:10:66:4b:a7 wlan0: associate with AP 00:1c:10:66:4b:a7 wlan0: association with AP 00:1c:10:66:4b:a7 timed out JBD: barrier-based sync failed on hda7 - disabling barriers wlan0: authenticate with AP 00:1c:10:66:4b:a7 wlan0: authenticated wlan0: associate with AP 00:1c:10:66:4b:a7 wlan0: RX AssocResp from 00:1c:10:66:4b:a7 (capab=0x401 status=0 aid=3) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: disassociating by local choice (reason=3) wlan0: No ProbeResp from current AP 00:1c:10:66:4b:a7 - assume out of range wlan0: no IPv6 routers present e100: eth0: e100_watchdog: link down wlan0: authenticate with AP 00:1c:10:66:4b:a7 wlan0: authenticated wlan0: associate with AP 00:1c:10:66:4b:a7 e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex wlan0: authenticate with AP 00:1c:10:66:4b:a7 ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticated wlan0: associate with AP 00:1c:10:66:4b:a7 wlan0: RX AssocResp from 00:1c:10:66:4b:a7 (capab=0x401 status=0 aid=3) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: disassociating by local choice (reason=3) wlan0: No ProbeResp from current AP 00:1c:10:66:4b:a7 - assume out of range wlan0: no IPv6 routers present wlan0: deauthenticated ath5k phy0: failed to wakeup the MAC Chip ath5k phy0: can't reset hardware (-5) pccard: card ejected from slot 0 ath5k_pci 0000:02:00.0: PCI INT A disabled pccard: CardBus card inserted into slot 0 PCI: 0000:02:00.0 reg 10 32bit mmio: [0, ffff] ath5k_pci 0000:02:00.0: enabling device (0000 -> 0002) ath5k_pci 0000:02:00.0: PCI INT A -> Link[C142] -> GSI 11 (level, low) -> IRQ 11 ath5k_pci 0000:02:00.0: registered as 'phy1' phy1: Selected rate control algorithm 'pid' ath5k phy1: Atheros AR5213 chip found (MAC: 0x56, PHY: 0x41) ath5k phy1: RF5111 5GHz radio found (0x17) ath5k phy1: RF2111 2GHz radio found (0x23) ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticated wlan0: associate with AP 00:1e:e5:70:49:b8 wlan0: RX AssocResp from 00:1e:e5:70:49:b8 (capab=0x421 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: disassociating by local choice (reason=3) wlan0: no IPv6 routers present wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticated wlan0: associate with AP 00:1e:e5:70:49:b8 wlan0: RX ReassocResp from 00:1e:e5:70:49:b8 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: disassociating by local choice (reason=3) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User hschaa@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c28 Helmut Schaa <hschaa@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #28 from Helmut Schaa <hschaa@novell.com> 2008-11-26 03:14:23 MST --- Ok, from a wireless point of view the connection was established successfully. You did not get an IP because of ARM500-sfn7:/home/oddball # dhcpcd wlan0 err, wlan0: dhcpcd already running on pid 15662 (/var/run/dhcpcd-wlan0.pid) If you kill dhcpcd you should remove that file. Could you please try again? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c29 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #29 from Robby Verberne <monkey9@iae.nl> 2008-11-26 03:43:54 MST --- ARM500-sfn7:/home/oddball # iwconfig wlan0 wlan0 IEEE 802.11bg ESSID:"linksys" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ARM500-sfn7:/home/oddball # iwlist wlan0 scan wlan0 Scan completed : Cell 01 - Address: 00:1C:10:66:4B:A7 ESSID:"linksys" Mode:Master Channel:11 Frequency:2.462 GHz (Channel 11) Quality=21/100 Signal level:-75 dBm Noise level=-89 dBm Encryption key:off Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Extra:tsf=0000005c4ffb3e14 Extra: Last beacon: 124ms ago ARM500-sfn7:/home/oddball # ps -A | grep dhc ARM500-sfn7:/home/oddball # dhcpcd wlan0 err, wlan0: timed out warn, wlan0: using IPV4LL address 169.254.64.48 ARM500-sfn7:/home/oddball # ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:03:2F:18:6A:9D inet addr:169.254.64.48 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) ARM500-sfn7:/home/oddball # ping google.com ping: unknown host google.com ARM500-sfn7:/home/oddball # ping 192.168.0.1 connect: Network is unreachable ARM500-sfn7:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c30 --- Comment #30 from Robby Verberne <monkey9@iae.nl> 2008-11-26 03:53:07 MST --- I do not get the ip address. the router gives out addresses starting from 192.168.1.100 what is this address: 169.254,64.48? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User hschaa@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c31 Helmut Schaa <hschaa@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #31 from Helmut Schaa <hschaa@novell.com> 2008-11-26 04:00:14 MST --- (In reply to comment #29 from Robby Verberne)
ARM500-sfn7:/home/oddball # iwconfig wlan0 wlan0 IEEE 802.11bg ESSID:"linksys" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
This time the connection wasn't established. Is that reproducable? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c32 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #32 from Robby Verberne <monkey9@iae.nl> 2008-11-26 04:09:57 MST --- dmesg: e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex NET: Registered protocol family 17 NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present JBD: barrier-based sync failed on hda7 - disabling barriers ADDRCONF(NETDEV_UP): wlan0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present ARM500-sfn7:/home/oddball # iwconfig wlan0 wlan0 IEEE 802.11bg ESSID:"linksys" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ARM500-sfn7:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c33 --- Comment #33 from Robby Verberne <monkey9@iae.nl> 2008-11-26 05:21:55 MST --- (from dmesg) What does this mean: wlan0: disassociating by local choice (reason=3) ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: disassociating by local choice (reason=3) wlan0: No ProbeResp from current AP 00:1c:10:66:4b:a7 - assume out of range -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User hschaa@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c34 Helmut Schaa <hschaa@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED --- Comment #34 from Helmut Schaa <hschaa@novell.com> 2008-11-28 03:11:34 MST --- (In reply to comment #33 from Robby Verberne)
(from dmesg) What does this mean:
wlan0: disassociating by local choice (reason=3)
Either NM or wpa_supplicant told the driver to disassociate.
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: disassociating by local choice (reason=3) wlan0: No ProbeResp from current AP 00:1c:10:66:4b:a7 - assume out of range
The AP did not answer to probe requests and thus the driver assumes that the AP is out of range. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c35 --- Comment #35 from Robby Verberne <monkey9@iae.nl> 2008-11-28 11:54:44 MST --- How can we find out which app did/does this, and how to stop it from doing that? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c36 --- Comment #36 from Robby Verberne <monkey9@iae.nl> 2008-12-01 08:53:26 MST --- I just freshed installed 11.1RC1: OS: Linux 2.6.27.7-4-pae i686 Huidige gebruiker: oddball@ARM500-sfn7 Systeem: openSUSE 11.1 (i586) KDE: 4.1.3 (KDE 4.1.3) "release 4.3", Wireless does work :)) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c37 --- Comment #37 from Robby Verberne <monkey9@iae.nl> 2008-12-03 00:48:42 MST --- Close bug? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=440928 User hschaa@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c38 Helmut Schaa <hschaa@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |FIXED --- Comment #38 from Helmut Schaa <hschaa@novell.com> 2008-12-03 00:51:00 MST --- Thanks for getting back Robby. Closing this bug as FIXED now. If you experience any issues again please reopen. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com