https://bugzilla.novell.com/show_bug.cgi?id=329154#c4 Jan Engelhardt <jengelh@gmx.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |WORKSFORME --- Comment #4 from Jan Engelhardt <jengelh@gmx.de> 2007-09-28 06:14:07 MST --- udev is supported. here is the deal: # udevinfo -q symlink -n /dev/sda2 disk/by-id/scsi-SATA_WDC_WD400EB-00CWD-WCAAT5461367-part2 disk/by-id/ata-WDC_WD400EB-00CP_WD-WCAAT5461367-part2 disk/by-path/pci-0000:00:02.5-scsi-0:0:0:0-part2 disk/by-uuid/a2f6869a-ab54-484a-b895-49aab4a92de4 disk/by-label/root # ls -1 /dev/disk/by-id/ata-*WDC*part2 /dev/disk/by-id/ata-WDC_WD400EB-00CPF0_WD-WCAAT5461367-part2 /dev/disk/by-id/ata-WDC_WD400EB-00CP_WD-WCAAT5461367-part2 # dmesg ata1.00: ATA-5: WDC WD400EB-00CPF0, 06.04G06, max UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD400EB-00CP 06.0 PQ: 0 ANSI: 5 $ udevtest /sys/block/sda/sda2 2>&1 | grep 00CP udev_rules_get_name: add symlink 'disk/by-id/ata-WDC_WD400EB-00CP_WD-WCAAT5461367-part2' udev_node_add: creating symlink '/dev/disk/by-id/ata-WDC_WD400EB-00CP_WD-WCAAT5461367-part2' to '../../sda2' No 00CPF0. The solution is that I used udev-114 from 10.3 in 10.2 (to test something else...) to create my last working initrd, so it created 00CPF0 and propagated it into the live /dev. ATM I am on udev-103 again. The following rules are not in the udev-103 used in 10.2: # libata compat (links like hd*) KERNEL=="sd*[!0-9]|sr*", ENV{ID_VENDOR}=="ATA", PROGRAM="ata_id $tempnode", RES KERNEL=="sd*[0-9]", ENV{ID_ATA_COMPAT}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_ So, solved :-/ -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.