https://bugzilla.novell.com/show_bug.cgi?id=437611 User lzw77rnc@gmx.at added comment https://bugzilla.novell.com/show_bug.cgi?id=437611#c2 Alexander Oberhuber <lzw77rnc@gmx.at> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |lzw77rnc@gmx.at Status|NEEDINFO |NEW Info Provider|lzw77rnc@gmx.at | --- Comment #2 from Alexander Oberhuber <lzw77rnc@gmx.at> 2008-10-24 01:21:35 MDT --- pnpbios=off helps, but only with SATA drives. The ETH1 network issue is still there: I tried to reboot the machine with the option "pnpbios=off". The SATA drives work well now, but the bug with the ETH1 card (8139too) painfully remains :
From DMESG:
------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:219 dev_watchdog+0x113/0x1a3() NETDEV WATCHDOG: eth1 (8139too): transmit timed out Modules linked in: af_packet snd_pcm_oss snd_mixer_oss binfmt_misc snd_seq snd_seq_device edd cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq speedstep_lib ipv6 joydev dm_mod snd_hda_intel snd_pcm usbhid 8139cp hid rtc_cmos intel_agp snd_timer snd_page_alloc thermal i2c_i801 snd_hwdep 8139too processor agpgart ff_memless rtc_core button i2c_core rtc_lib mii r8169 pcspkr snd soundcore aufs fuse squashfs loop nls_utf8 BusLogic brd st ide_disk ide_cd_mod parport_pc parport sg sr_mod cdrom ide_pci_generic jmicron ide_core ata_piix ata_generic sd_mod crc_t10dif usb_storage ahci pata_jmicron pata_acpi libata scsi_mod ehci_hcd dock uhci_hcd usbcore [last unloaded: ppa] Pid: 0, comm: swapper Tainted: G 2.6.27-rc7-12-default #1 [<c0105590>] dump_trace+0x6b/0x249 [<c01060c5>] show_trace+0x20/0x39 [<c033d4f7>] dump_stack+0x71/0x76 [<c0129b8e>] warn_slowpath+0x6f/0x90 [<c02e798f>] dev_watchdog+0x113/0x1a3 [<c0131f37>] run_timer_softirq+0x160/0x1dd [<c012e7f3>] __do_softirq+0x78/0xe4 [<c012e8a4>] do_softirq+0x45/0x53 [<c012e9ac>] irq_exit+0x35/0x69 [<c011225c>] smp_apic_timer_interrupt+0x7e/0x8a [<c0104e38>] apic_timer_interrupt+0x28/0x30 [<c010982b>] mwait_idle+0x2f/0x3b [<c0102cdf>] cpu_idle+0xe4/0x105 ======================= ---[ end trace f40d7a307e9a8ef8 ]--- eth1: Transmit timeout, status 11 0000 0000 media 10. eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 eth1: Transmit timeout, status 11 0000 0000 media 10. eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 Here is the full dmesg, for diagnosis : Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27-rc7-12-default (geeko@buildhost) (gcc version 4.3.3 20080915 (prerelease) [gcc-4_3-branch revision 140371] (SUSE Linux) ) #1 SMP 2008-09-29 23:39:54 +0200 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bff90000 (usable) BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data) BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS) BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) last_pfn = 0xbff90 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 38000000 @ 7000-c000 RAMDISK: 7f31a000 - 7ffffe92 Allocated new RAMDISK: 00642000 - 01327e92 Move RAMDISK from 000000007f31a000 - 000000007ffffe91 to 00642000 - 01327e91 DMI present. ACPI: RSDP 000F99D0, 0014 (r0 ACPIAM) ACPI: RSDT BFF90000, 0040 (r1 7514MS A7514200 20080911 MSFT 97) ACPI: FACP BFF90200, 0084 (r1 7514MS A7514200 20080911 MSFT 97) ACPI: DSDT BFF905C0, 64FA (r1 A7514 A7514200 200 INTL 20051117) ACPI: FACS BFF9E000, 0040 ACPI: APIC BFF90390, 006C (r1 7514MS A7514200 20080911 MSFT 97) ACPI: MCFG BFF90400, 003C (r1 7514MS OEMMCFG 20080911 MSFT 97) ACPI: SLIC BFF90440, 0176 (r1 7514MS A7514200 20080911 MSFT 97) ACPI: OEMB BFF9E040, 0072 (r1 7514MS A7514200 20080911 MSFT 97) ACPI: HPET BFF985C0, 0038 (r1 7514MS OEMHPET 20080911 MSFT 97) ACPI: SSDT BFF9EAC0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20051117) 2175MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00009000 - 00010000 (9 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000063ea1c] TEXT DATA BSS ==> [0000100000 - 000063ea1c] #4 [000063f000 - 0000642000] INIT_PG_TABLE ==> [000063f000 - 0000642000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [0000642000 - 0001327e92] NEW RAMDISK ==> [0000642000 - 0001327e92] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] found SMP MP-table at [c00ff780] 000ff780 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x000bff90 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bff90 On node 0 totalpages: 786223 free_area_init_node: node 0, pgdat c050d180, node_mem_map c1328000 DMA zone: 3963 pages, LIFO batch:0 Normal zone: 223300 pages, LIFO batch:31 HighMem zone: 552048 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0xffffffff base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000) PERCPU: Allocating 39068 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779311 Kernel command line: BOOT_IMAGE=linux initrd=initrd,10240768.spl ramdisk_size=512000 ramdisk_blocksize=4096 splash=silent vga=0x317 lang=de_DE pnpbios=off bootsplash: silent mode. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 2393.987 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3096628k/3145280k available (2316k kernel code, 47288k reserved, 1918k data, 304k init, 2227776k highmem) virtual kernel memory layout: fixmap : 0xffdf6000 - 0xfffff000 (2084 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc052a000 - 0xc0576000 ( 304 kB) .data : 0xc034319b - 0xc0522aa0 (1918 kB) .text : 0xc0100000 - 0xc034319b (2316 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.97 BogoMIPS (lpj=9575948) kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved Security Framework initialized SELinux: Disabled at boot. AppArmor: AppArmor initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ACPI: Checking initramfs for custom DSDT Parsing all Control Methods: Table [DSDT](id 0001) - 877 Objects with 81 Devices 221 Methods 27 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 50 Objects with 0 Devices 8 Methods 1 Regions tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful ENABLING IO-APIC IRQs .TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4787.98 BogoMIPS (lpj=9575976) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/2 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4788.01 BogoMIPS (lpj=9576022) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#1 -> CPU#2]: passed. Booting processor 3/3 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4812.86 BogoMIPS (lpj=9625734) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#2 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (19176.84 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-3 level CPU groups: 0-1 2-3 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-3 level CPU groups: 0-1 2-3 CPU2 attaching sched-domain: domain 0: span 2-3 level MC groups: 2 3 domain 1: span 0-3 level CPU groups: 2-3 0-1 CPU3 attaching sched-domain: domain 0: span 2-3 level MC groups: 3 2 domain 1: span 0-3 level CPU groups: 2-3 0-1 net_namespace: 840 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 3F [_GPE] 8 regs on int 0x9 ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:.......................................................................................................................................................................... Initialized 23/28 Regions 57/57 Fields 56/56 Buffers 36/37 Packages (936 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods: Executed 0 _INI methods requiring 0 _STA executions (examined 87 objects) evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 1 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: 0000:00:1a.0 reg 20 io port: [ac00, ac1f] PCI: 0000:00:1a.1 reg 20 io port: [a880, a89f] PCI: 0000:00:1a.2 reg 20 io port: [a800, a81f] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fe7ffc00, fe7fffff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [fe7f8000, fe7fbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [a480, a49f] PCI: 0000:00:1d.1 reg 20 io port: [a400, a41f] PCI: 0000:00:1d.2 reg 20 io port: [a080, a09f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fe7ff800, fe7ffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled PCI: 0000:00:1f.2 reg 10 io port: [a000, a007] PCI: 0000:00:1f.2 reg 14 io port: [9c00, 9c03] PCI: 0000:00:1f.2 reg 18 io port: [9880, 9887] PCI: 0000:00:1f.2 reg 1c io port: [9800, 9803] PCI: 0000:00:1f.2 reg 20 io port: [9480, 948f] PCI: 0000:00:1f.2 reg 24 io port: [9400, 940f] PCI: 0000:00:1f.3 reg 10 64bit mmio: [fe7ff400, fe7ff4ff] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f] PCI: 0000:00:1f.5 reg 10 io port: [9000, 9007] PCI: 0000:00:1f.5 reg 14 io port: [8c00, 8c03] PCI: 0000:00:1f.5 reg 18 io port: [8880, 8887] PCI: 0000:00:1f.5 reg 1c io port: [8800, 8803] PCI: 0000:00:1f.5 reg 20 io port: [8480, 848f] PCI: 0000:00:1f.5 reg 24 io port: [8400, 840f] PCI: 0000:01:00.0 reg 10 32bit mmio: [d0000000, dfffffff] PCI: 0000:01:00.0 reg 18 64bit mmio: [fe8f0000, fe8fffff] PCI: 0000:01:00.0 reg 20 io port: [b000, b0ff] PCI: 0000:01:00.0 reg 30 32bit mmio: [fe8c0000, fe8dffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 PCI: 0000:01:00.1 reg 10 64bit mmio: [fe8ec000, fe8effff] pci 0000:01:00.1: supports D1 pci 0000:01:00.1: supports D2 PCI: bridge 0000:00:01.0 io port: [b000, bfff] PCI: bridge 0000:00:01.0 32bit mmio: [fe800000, fe8fffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff] PCI: 0000:02:00.0 reg 24 32bit mmio: [fe9fe000, fe9fffff] pci 0000:02:00.0: PME# supported from D3hot pci 0000:02:00.0: PME# disabled PCI: 0000:02:00.1 reg 10 io port: [cc00, cc07] PCI: 0000:02:00.1 reg 14 io port: [c880, c883] PCI: 0000:02:00.1 reg 18 io port: [c800, c807] PCI: 0000:02:00.1 reg 1c io port: [c480, c483] PCI: 0000:02:00.1 reg 20 io port: [c400, c40f] Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.0. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:1c.0 io port: [c000, cfff] PCI: bridge 0000:00:1c.0 32bit mmio: [fe900000, fe9fffff] PCI: 0000:04:00.0 reg 10 io port: [d800, d8ff] PCI: 0000:04:00.0 reg 18 32bit mmio: [fdfff000, fdffffff] PCI: 0000:04:00.0 reg 20 32bit mmio: [fdfe0000, fdfeffff] PCI: 0000:04:00.0 reg 30 32bit mmio: [0, ffff] pci 0000:04:00.0: supports D1 pci 0000:04:00.0: supports D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled PCI: bridge 0000:00:1c.5 io port: [d000, dfff] PCI: bridge 0000:00:1c.5 32bit mmio: [fea00000, feafffff] PCI: bridge 0000:00:1c.5 64bit mmio pref: [fdf00000, fdffffff] PCI: 0000:05:02.0 reg 10 io port: [e800, e8ff] PCI: 0000:05:02.0 reg 14 32bit mmio: [febffc00, febffcff] PCI: 0000:05:02.0 reg 30 32bit mmio: [febe0000, febeffff] pci 0000:05:02.0: supports D1 pci 0000:05:02.0: supports D2 pci 0000:05:02.0: PME# supported from D1 D2 D3hot D3cold pci 0000:05:02.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [e000, efff] PCI: bridge 0000:00:1e.0 32bit mmio: [feb00000, febfffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *6 7 10 11 12 14 15) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 82, should be 7D [20080609] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 17 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz AppArmor: AppArmor Filesystem Enabled ACPI: RTC can wake from S4 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved system 00:08: ioport range 0x4c0-0x4ff has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x800-0x87f has been reserved system 00:08: ioport range 0x480-0x4bf has been reserved system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved system 00:0b: iomem range 0xffc00000-0xffefffff could not be reserved system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0e: ioport range 0xa00-0xadf has been reserved system 00:0e: ioport range 0xae0-0xaef has been reserved system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved system 00:10: iomem range 0x0-0x9ffff could not be reserved system 00:10: iomem range 0xc0000-0xcffff could not be reserved system 00:10: iomem range 0xe0000-0xfffff could not be reserved system 00:10: iomem range 0x100000-0xbfffffff could not be reserved system 00:10: iomem range 0xfed90000-0xffffffff could not be reserved Switched to high resolution mode on CPU 1 pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xb000-0xbfff pci 0000:00:01.0: MEM window: 0xfe800000-0xfe8fffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0xc000-0xcfff pci 0000:00:1c.0: MEM window: 0xfe900000-0xfe9fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: disabled pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.5: IO window: 0xd000-0xdfff pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff pci 0000:00:1c.5: PREFETCH window: 0x000000fdf00000-0x000000fdffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1e.0: IO window: 0xe000-0xefff pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:1e.0: PREFETCH window: 0x000000c4000000-0x000000c40fffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffff] bus: 01 index 0 io port: [b000, bfff] bus: 01 index 1 mmio: [fe800000, fe8fffff] bus: 01 index 2 mmio: [d0000000, dfffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [c000, cfff] bus: 02 index 1 mmio: [fe900000, fe9fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [0, 0] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 io port: [d000, dfff] bus: 04 index 1 mmio: [fea00000, feafffff] bus: 04 index 2 mmio: [fdf00000, fdffffff] bus: 04 index 3 mmio: [0, 0] bus: 05 index 0 io port: [e000, efff] bus: 05 index 1 mmio: [feb00000, febfffff] bus: 05 index 2 mmio: [c4000000, c40fffff] bus: 05 index 3 io port: [0, ffff] bus: 05 index 4 mmio: [0, ffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 13207k freed Machine check exception polling timer started. audit: initializing netlink socket (disabled) type=2000 audit(1224764399.133:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 431 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service pci_express 0000:00:1c.5:pcie03: allocate port service vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at c000:9fe0 vesafb: pmi: set display start = c00ca082, set palette = c00ca140 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 166113 bytes bootsplash: ...found (1024x768, 154167 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Serial: 8250/16550 driver8 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A floppy0: no floppy controllers found PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 304k freed Write protecting the kernel text: 2320k Write protecting the kernel read-only data: 1720k udevd version 128 started usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ac00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP] ACPI: No dock devices found. SCSI subsystem initialized libata version 3.00 loaded. usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-rc7-12-default uhci_hcd usb usb1: SerialNumber: 0000:00:1a.0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-rc7-12-default uhci_hcd usb usb2: SerialNumber: 0000:00:1a.1 uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 2-2: new low speed USB device using uhci_hcd and address 2 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-rc7-12-default uhci_hcd usb usb3: SerialNumber: 0000:00:1a.2 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: EHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-rc7-12-default ehci_hcd usb usb4: SerialNumber: 0000:00:1a.7 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a480 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-rc7-12-default uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 2-2: device not accepting address 2, error -71 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27-rc7-12-default uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a080 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected hub 2-0:1.0: unable to enumerate USB device on port 2 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.27-rc7-12-default uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 6 ports detected usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: EHCI Host Controller usb usb8: Manufacturer: Linux 2.6.27-rc7-12-default ehci_hcd usb usb8: SerialNumber: 0000:00:1d.7 pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 pata_acpi 0000:00:1f.2: setting latency timer to 64 pata_acpi 0000:00:1f.2: PCI INT B disabled pata_acpi 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 pata_acpi 0000:00:1f.5: setting latency timer to 64 pata_acpi 0000:00:1f.5: PCI INT B disabled pata_acpi 0000:02:00.1: enabling device (0000 -> 0001) vendor=8086 device=3a40 pata_acpi 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pata_acpi 0000:02:00.1: setting latency timer to 64 vendor=8086 device=3a40 pata_acpi 0000:02:00.1: PCI INT B disabled ahci 0000:02:00.0: version 3.0 vendor=8086 device=3a40 ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part ahci 0000:02:00.0: setting latency timer to 64 scsi0 : ahci scsi1 : ahci ata1: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16 ata2: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16 usb 4-6: new high speed USB device using ehci_hcd and address 3 usb 4-6: configuration #1 chosen from 1 choice usb 4-6: New USB device found, idVendor=05e3, idProduct=0702 usb 4-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 4-6: Product: USB TO IDE Initializing USB Mass Storage driver... ata1: SATA link down (SStatus 0 SControl 300) usb 2-2: new low speed USB device using uhci_hcd and address 4 ata2: SATA link down (SStatus 0 SControl 300) vendor=8086 device=3a40 pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pata_jmicron 0000:02:00.1: setting latency timer to 64 scsi2 : pata_jmicron scsi3 : pata_jmicron ata3: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17 ata4: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17 usb 2-2: configuration #1 chosen from 1 choice usb 2-2: New USB device found, idVendor=045e, idProduct=0025 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Microsoft IntelliMouse « with IntelliEye usb 2-2: Manufacturer: Microsoft scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 4:0:0:0: Direct-Access IC25N060 ATMR04-0 0811 PQ: 0 ANSI: 0 usb-storage: device scan complete Driver 'sd' needs updating - please use bus_type methods ata3.00: ATA-6: ST3160021A, 3.06, max UDMA/100 ata3.00: 312581808 sectors, multi 16: LBA48 ata3.01: ATAPI: TSSTcorpCD/DVDW SH-W162C, TS11, max UDMA/33 ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 scsi 2:0:0:0: Direct-Access ATA ST3160021A 3.06 PQ: 0 ANSI: 5 scsi 2:0:1:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS11 PQ: 0 ANSI: 5 sd 4:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0GB/55.8GiB) sd 4:0:0:0: [sda] Test WP failed, assume Write Enabled sd 4:0:0:0: [sda] Assuming drive cache: write through sd 4:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0GB/55.8GiB) ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi5 : ata_piix scsi6 : ata_piix ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19 ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19 sd 4:0:0:0: [sda] Test WP failed, assume Write Enabled sd 4:0:0:0: [sda] Assuming drive cache: write through sda:<6>Uniform Multi-Platform E-IDE driver sda1 sda2 sd 4:0:0:0: [sda] Attached SCSI disk sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160GB/149GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160GB/149GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI disk ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATA-7: Maxtor 6Y120M0, YAR51BW0, max UDMA/133 ata5.00: 240121728 sectors, multi 0: LBA ata5.01: ATA-7: SAMSUNG HD753LJ, 1AA01109, max UDMA7 ata5.01: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/133 ata5.01: configured for UDMA/133 ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: ATAPI: TSSTcorpDVD-ROM SH-D163B, SB00, max UDMA/33 ata6.01: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7 ata6.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata6.00: configured for UDMA/33 ata6.01: configured for UDMA/133 scsi 5:0:0:0: Direct-Access ATA Maxtor 6Y120M0 YAR5 PQ: 0 ANSI: 5 scsi 5:0:1:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 scsi 6:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D163B SB00 PQ: 0 ANSI: 5 scsi 6:0:1:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] sd 5:0:0:0: [sdc] 240121728 512-byte hardware sectors: (122GB/114GiB) sd 5:0:0:0: [sdc] Write Protect is off sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 ata_piix 0000:00:1f.5: setting latency timer to 64 sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdc] 240121728 512-byte hardware sectors: (122GB/114GiB) sd 5:0:0:0: [sdc] Write Protect is off sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc:<6>scsi7 : ata_piix scsi8 : ata_piix ata7: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19 ata8: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19 sdc1 sdc2 sdc3 sd 5:0:0:0: [sdc] Attached SCSI disk sd 5:0:1:0: [sdd] 1465149168 512-byte hardware sectors: (750GB/698GiB) sd 5:0:1:0: [sdd] Write Protect is off sd 5:0:1:0: [sdd] Mode Sense: 00 3a 00 00 sd 5:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:1:0: [sdd] 1465149168 512-byte hardware sectors: (750GB/698GiB) sd 5:0:1:0: [sdd] Write Protect is off sd 5:0:1:0: [sdd] Mode Sense: 00 3a 00 00 sd 5:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 < sdd5 sdd6 sdd7 sdd8 > sd 5:0:1:0: [sdd] Attached SCSI disk sd 6:0:1:0: [sde] 1953525168 512-byte hardware sectors: (1000GB/931GiB) sd 6:0:1:0: [sde] Write Protect is off sd 6:0:1:0: [sde] Mode Sense: 00 3a 00 00 sd 6:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:1:0: [sde] 1953525168 512-byte hardware sectors: (1000GB/931GiB) sd 6:0:1:0: [sde] Write Protect is off sd 6:0:1:0: [sde] Mode Sense: 00 3a 00 00 sd 6:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sd 6:0:1:0: [sde] Attached SCSI disk ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata7.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7 ata7.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata7.00: configured for UDMA/133 ata8: SATA link down (SStatus 0 SControl 300) scsi 7:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 sd 7:0:0:0: [sdf] 488397168 512-byte hardware sectors: (250GB/232GiB) sd 7:0:0:0: [sdf] Write Protect is off sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 7:0:0:0: [sdf] 488397168 512-byte hardware sectors: (250GB/232GiB) sd 7:0:0:0: [sdf] Write Protect is off sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sd 7:0:0:0: [sdf] Attached SCSI disk Driver 'sr' needs updating - please use bus_type methods sd 4:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: Attached scsi generic sg1 type 0 sr 2:0:1:0: Attached scsi generic sg2 type 5 sd 5:0:0:0: Attached scsi generic sg3 type 0 sd 5:0:1:0: Attached scsi generic sg4 type 0 scsi 6:0:0:0: Attached scsi generic sg5 type 5 sd 6:0:1:0: Attached scsi generic sg6 type 0 sd 7:0:0:0: Attached scsi generic sg7 type 0 sr0: scsi3-mmc drive: 94x/94x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:1:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray sr 6:0:0:0: Attached scsi CD-ROM sr1 parport_pc 00:07: disabled parport 0x3bc (WARNING): CTR: wrote 0x0c, read 0xff parport 0x3bc (WARNING): DATA: wrote 0xaa, read 0xff parport 0x3bc: You gave this address, but there is probably no parallel port there! parport0: PC-style at 0x3bc [PCSPP,TRISTATE] ppa: Version 2.07 (for Linux 2.4.x) st: Version 20080504, fixed bufsize 32768, s/g segs 256 Driver 'st' needs updating - please use bus_type methods brd: module loaded ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A loop: module loaded squashfs: version 3.3-CVS (2008/04/04) Phillip Lougher fuse init (API version 7.9) aufs 20080811 aufs test_add:368:mount[1746]: uid/gid/perm /read-only 0/0/0755, 0/0/01777 udevd version 128 started input: PC Speaker as /devices/platform/pcspkr/input/input1 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded vendor=8086 device=3a4a r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:04:00.0: setting latency timer to 64 eth0: RTL8168c/8111c at 0xf887c000, 00:21:85:1d:66:32, XID 3c4000c0 IRQ 219 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button (CM) [PWRB] Linux agpgart interface v0.103 ACPI: SSDT BFF9E0C0, 0277 (r1 DpgPmm P001Ist 11 INTL 20051117) Parsing all Control Methods: Table [SSDT](id 00E1) - 6 Objects with 0 Devices 4 Methods 0 Regions processor ACPI0007:00: registered as cooling_device0 ACPI: SSDT BFF9E340, 0277 (r1 DpgPmm P002Ist 12 INTL 20051117) Parsing all Control Methods: Table [SSDT](id 00E4) - 6 Objects with 0 Devices 4 Methods 0 Regions processor ACPI0007:01: registered as cooling_device1 ACPI: SSDT BFF9E5C0, 0277 (r1 DpgPmm P003Ist 12 INTL 20051117) Parsing all Control Methods: Table [SSDT](id 00E7) - 6 Objects with 0 Devices 4 Methods 0 Regions processor ACPI0007:02: registered as cooling_device2 ACPI: SSDT BFF9E840, 0277 (r1 DpgPmm P004Ist 12 INTL 20051117) Parsing all Control Methods: Table [SSDT](id 00EA) - 6 Objects with 0 Devices 4 Methods 0 Regions processor ACPI0007:03: registered as cooling_device3 8139too Fast Ethernet driver 0.9.28 vendor=8086 device=244e 8139too 0000:05:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 eth1: RealTek RTL8139 at 0xf927ac00, 00:4f:4e:0c:6d:f1, IRQ 21 eth1: Identified 8139 chip type 'RTL-8139C' i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) usbcore: registered new interface driver hiddev input: Microsoft Microsoft IntelliMouse « with IntelliEye as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input4 input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse « with IntelliEye] on usb-0000:00:1a.1-2 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:01:00.1: setting latency timer to 64 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com NET: Registered protocol family 10 lo: Disabled Privacy Extensions mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining mtrr: no MTRR for d0000000,10000000 found bootsplash: status on console 0 changed to on powernow: This module only works with AMD K7 CPUs BIOS EDD facility v0.16 2004-Jun-25, 6 devices found eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 r8169: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready NET: Registered protocol family 17 mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining eth1: no IPv6 routers present ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:219 dev_watchdog+0x113/0x1a3() NETDEV WATCHDOG: eth1 (8139too): transmit timed out Modules linked in: af_packet snd_pcm_oss snd_mixer_oss binfmt_misc snd_seq snd_seq_device edd cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq speedstep_lib ipv6 joydev dm_mod snd_hda_intel snd_pcm usbhid 8139cp hid rtc_cmos intel_agp snd_timer snd_page_alloc thermal i2c_i801 snd_hwdep 8139too processor agpgart ff_memless rtc_core button i2c_core rtc_lib mii r8169 pcspkr snd soundcore aufs fuse squashfs loop nls_utf8 BusLogic brd st ide_disk ide_cd_mod parport_pc parport sg sr_mod cdrom ide_pci_generic jmicron ide_core ata_piix ata_generic sd_mod crc_t10dif usb_storage ahci pata_jmicron pata_acpi libata scsi_mod ehci_hcd dock uhci_hcd usbcore [last unloaded: ppa] Pid: 0, comm: swapper Tainted: G 2.6.27-rc7-12-default #1 [<c0105590>] dump_trace+0x6b/0x249 [<c01060c5>] show_trace+0x20/0x39 [<c033d4f7>] dump_stack+0x71/0x76 [<c0129b8e>] warn_slowpath+0x6f/0x90 [<c02e798f>] dev_watchdog+0x113/0x1a3 [<c0131f37>] run_timer_softirq+0x160/0x1dd [<c012e7f3>] __do_softirq+0x78/0xe4 [<c012e8a4>] do_softirq+0x45/0x53 [<c012e9ac>] irq_exit+0x35/0x69 [<c011225c>] smp_apic_timer_interrupt+0x7e/0x8a [<c0104e38>] apic_timer_interrupt+0x28/0x30 [<c010982b>] mwait_idle+0x2f/0x3b [<c0102cdf>] cpu_idle+0xe4/0x105 ======================= ---[ end trace f40d7a307e9a8ef8 ]--- eth1: Transmit timeout, status 11 0000 0000 media 10. eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 eth1: Transmit timeout, status 11 0000 0000 media 10. eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. eth1: Transmit timeout, status 11 0000 0000 media 10. eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 eth1: Transmit timeout, status 11 0000 0000 media 10. eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 eth1: Transmit timeout, status 11 0000 0000 media 10. eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 eth1: Transmit timeout, status 11 0000 0000 media 10. eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 Needless to say, the eth1 card works fine with another operating system, or I wouldn't be able to mail this. :-/ Your mileage may vary. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.