http://bugzilla.novell.com/show_bug.cgi?id=540589 http://bugzilla.novell.com/show_bug.cgi?id=540589#c32 --- Comment #32 from Tamás Németh <nice@titanic.nyme.hu> 2010-01-20 09:37:35 UTC --- (In reply to comment #31)
Kernel's for testing. Please give me feedback if you get a chance to test this out. Thanks!
http://beta.suse.com/private/bphilips/540589/kernel-pae-2.6.31.11-bnc540589....
http://beta.suse.com/private/bphilips/540589/kernel-desktop-2.6.31.11-bnc540...
OK, I've tried the desktop kernel, and I found no kernel crah so far, however, only open SSIDs work, I was unable to connect to a WPA enterprise SSID. Here are some dmesg outputs: ############################################################## Module load by killswitch: pci 0000:01:00.0: reg 10 32bit mmio: [0x000000-0x00ffff] pci 0000:01:00.0: PME# supported from D0 D3hot pci 0000:01:00.0: PME# disabled rt2860sta: module is from the staging directory, the quality is unknown, you have been warned. rt2860 0000:01:00.0: enabling device (0000 -> 0002) rt2860 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 === pAd = f8c33000, size = 585464 === <-- RTMPAllocAdapterBlock, Status=0 rt2860 0000:01:00.0: setting latency timer to 64 RX DESC dc97a000 size = 2048 <-- RTMPAllocTxRxRingMemory, Status=0 I/F(wlan0) Key1Str is Invalid key length! KeyLen = 0! I/F(wlan0) Key2Str is Invalid key length! KeyLen = 0! I/F(wlan0) Key3Str is Invalid key length! KeyLen = 0! I/F(wlan0) Key4Str is Invalid key length! KeyLen = 0! 1. Phy Mode = 9 2. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=1 3. Phy Mode = 9 MCS Set = ff ff 00 00 01 <==== RTMPInitialize, Status=0 0x1300 = 00064300 ############################################################## Connection to open SSID: ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) Rcv Wcid(1) AddBAReq Start Seq = 00000733 RPC: Registered udp transport module. RPC: Registered tcp transport module. Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded FS-Cache: Netfs 'nfs' registered for caching ############################################################## During the connection (multiple sessions accumulated here): ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1060 ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 726 ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 726 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) Rcv Wcid(1) AddBAReq Start Seq = 0000073d ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1060 ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 726 ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 563 ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 726 ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 897 ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 563 ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ############################################################## Disconnecting by killswitch (no crash!!!!): ERROR!!! BBP read R66=0xffffffff fail ERROR!!! BBP read R1=0xffffffff fail ERROR!!! BBP write R1=0xffffffff fail ERROR!!! H2M_MAILBOX still hold by MCU. command fail ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize! ERROR!!! H2M_MAILBOX still hold by MCU. command fail ERROR!!! H2M_MAILBOX still hold by MCU. command fail ERROR!!! BBP read R1=0xffffffff fail ERROR!!! BBP write R1=0xffffffff fail ERROR!!! H2M_MAILBOX still hold by MCU. command fail ############################################################## Turning on again by killswitch: pci 0000:01:00.0: reg 10 32bit mmio: [0x000000-0x00ffff] pci 0000:01:00.0: PME# supported from D0 D3hot pci 0000:01:00.0: PME# disabled rt2860 0000:01:00.0: enabling device (0000 -> 0002) rt2860 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 === pAd = f8dc1000, size = 585464 === <-- RTMPAllocAdapterBlock, Status=0 rt2860 0000:01:00.0: setting latency timer to 64 RX DESC d88bb000 size = 2048 <-- RTMPAllocTxRxRingMemory, Status=0 I/F(wlan0) Key1Str is Invalid key length! KeyLen = 0! I/F(wlan0) Key2Str is Invalid key length! KeyLen = 0! I/F(wlan0) Key3Str is Invalid key length! KeyLen = 0! I/F(wlan0) Key4Str is Invalid key length! KeyLen = 0! 1. Phy Mode = 9 2. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=1 3. Phy Mode = 9 MCS Set = ff ff 00 00 01 <==== RTMPInitialize, Status=0 0x1300 = 00064300 ############################################################## Connecting to WPA-Enterprise unsuccessful :(((( ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1060 ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1060 ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1060 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1060 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1060 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=6) ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 730 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=6) ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 897 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=6) ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 730 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 563 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 893 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.