https://bugzilla.suse.com/show_bug.cgi?id=1219395 https://bugzilla.suse.com/show_bug.cgi?id=1219395#c4 --- Comment #4 from Michal Suchanek <msuchanek@suse.com> --- Works for me # get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 0 No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 4 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 8 No EDID on bus 11 No EDID on bus 12 No EDID on bus 13 Problem requesting slave address: Device or resource busy No EDID on bus 15 Problem requesting slave address: Device or resource busy No EDID on bus 17 2 potential busses found: 9 10 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. 256-byte EDID successfully retrieved from i2c bus 9 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "" ModelName "" VendorName "BOE" # Monitor Manufactured week 23 of 2019 # EDID version 1.4 # Digital Display DisplaySize 280 190 Gamma 2.20 Option "DPMS" "false" Modeline "Mode 0" +hsync -vsync Modeline "Mode 1" +hsync -vsync EndSection -- You are receiving this mail because: You are on the CC list for the bug.