[Bug 331809] Huawei E220 (UMTS modem) doesn't work in 10.3

https://bugzilla.novell.com/show_bug.cgi?id=331809#c1 --- Comment #1 from Dirk Schwartzkopff <SchwartzkopffD@Alte-Leipziger.de> 2007-10-10 04:20:07 MST --- It works just fine on ppc64 hardware (ps3). I am trying to install 10.3 on my other computers (ppc32 and i386). Here is the debug log of the error: usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: Had to override the open usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the write usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the close usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the write_room usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the chars_in_buffer usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the read_bulk_callback usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the write_bulk_callback usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core usb 1-2: new full speed USB device using ohci_hcd and address 2 usb 1-2: new device found, idVendor=12d1, idProduct=1003 usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: HUAWEI Mobile usb 1-2: Manufacturer: HUAWEI Technologies usb 1-2: configuration #1 chosen from 1 choice drivers/usb/serial/usb-serial.c: Had to override the read_bulk_callback usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the write_bulk_callback usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port) drivers/usb/serial/usb-serial.c: static descriptor matches drivers/usb/serial/usb-serial.c: found bulk in on endpoint 0 drivers/usb/serial/usb-serial.c: found bulk out on endpoint 1 option 1-2:1.0: GSM modem (1-port) converter detected drivers/usb/serial/usb-serial.c: usb_serial_probe - setting up 1 port structures for this device drivers/usb/serial/usb-serial.c: get_free_serial 1 drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0 drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0 usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0 usbcore: registered new interface driver option drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.70 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 drivers/usb/serial/usb-serial.c: serial_open drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_tiocmget - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_tiocmget - port 0 drivers/usb/serial/usb-serial.c: serial_tiocmset - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x540b drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_write - port 0, 1 byte(s) drivers/usb/serial/usb-serial.c: usb_serial_port_work - port 0 hub 1-0:1.0: port 2 disabled by hub (EMI?), re-enabling... usb 1-2: USB disconnect, address 2 drivers/usb/serial/usb-serial.c: usb_serial_disconnect option 1-2:1.0: device disconnected usb 1-2: new full speed USB device using ohci_hcd and address 4 usb 1-2: new device found, idVendor=12d1, idProduct=1003 usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: HUAWEI Mobile usb 1-2: Manufacturer: HUAWEI Technologies usb 1-2: configuration #1 chosen from 1 choice drivers/usb/serial/usb-serial.c: static descriptor matches drivers/usb/serial/usb-serial.c: found bulk in on endpoint 0 drivers/usb/serial/usb-serial.c: found bulk out on endpoint 1 option 1-2:1.0: GSM modem (1-port) converter detected drivers/usb/serial/usb-serial.c: usb_serial_probe - setting up 1 port structures for this device drivers/usb/serial/usb-serial.c: get_free_serial 1 drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 1 drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB1 usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1 drivers/usb/serial/usb-serial.c: serial_close - port 0 drivers/usb/serial/usb-serial.c: destroy_serial - GSM modem (1-port) drivers/usb/serial/usb-serial.c: return_serial option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 drivers/usb/serial/usb-serial.c: port_release - ttyUSB0 drivers/usb/serial/usb-serial.c: serial_open drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_tiocmget - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_tiocmget - port 1 drivers/usb/serial/usb-serial.c: serial_tiocmset - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x540b drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_write - port 1, 1 byte(s) drivers/usb/serial/usb-serial.c: serial_write - port 1, 1 byte(s) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.