https://bugzilla.novell.com/show_bug.cgi?id=222128 ------- Comment #11 from mSvoboda@nusurf.at 2006-11-29 09:12 MST ------- The speed looks very suspicious to me, can you try with minicom and different speed settings for ttyS1 ? bingo! it works with minicom, I got connection and I was in Internet on www.etel.at, it's my provider! really very slowly ... (with device ttyS1) BUT if I try immediately after computer start to get connection with # wvdial /etc/wvdial.conf --> WvDial: Internet dialer version 1.54.0 --> Warning: section [Dialer /etc/wvdial.conf] does not exist in wvdial.conf. --> Cannot open /dev/modem: No such file or directory I must go trough YAST / network devices / modem / config and then I get /dev/modem # ls -l /dev/modem lrwxrwxrwx 1 root root 10 Nov 29 15:26 /dev/modem -> /dev/ttyS1 and I get connection to Internet how could I get the link automatically after boot? the same problem I have with kinternet, it need /dev/modem, and then (I cannot change /dev/modem to /dev/ttyS1) protocol: SuSE Meta pppd (smpppd-ifcfg), Version 1.59 on Chlada2006. Status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected Status is: connecting pppd[0]: Plugin passwordfd.so loaded. pppd[0]: --> WvDial: Internet dialer version 1.54.0 pppd[0]: --> Initializing modem. pppd[0]: --> Sending: ATZ pppd[0]: ATZ pppd[0]: OK pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 pppd[0]: OK pppd[0]: --> Sending: ATM1 pppd[0]: ATM1 pppd[0]: OK pppd[0]: --> Modem initialized. pppd[0]: --> Sending: ATDT1011019982736 pppd[0]: --> Waiting for carrier. pppd[0]: ATDT1011019982736 pppd[0]: CONNECT 37333/ARQ/V90/LAPM/V42BIS pppd[0]: --> Carrier detected. Waiting for prompt. pppd[0]: ** TNT 2 Vienna Austria ** pppd[0]: Login: pppd[0]: --> Looks like a login prompt. pppd[0]: --> Sending: msvoboda@nusurf.at pppd[0]: msvoboda@nusurf.at pppd[0]: Password: pppd[0]: --> Looks like a password prompt. pppd[0]: --> Sending: (password) pppd[0]: PPP: Not enabled pppd[0]: AT_V_TT02% pppd[0]: --> Hmm... a prompt. Sending "ppp". pppd[0]: ppp pppd[0]: PPP: Not enabled pppd[0]: AT_V_TT02% pppd[0]: --> Hmm... a prompt. Sending "ppp". pppd[0]: ppp pppd[0]: PPP: Not enabled pppd[0]: AT_V_TT02% pppd[0]: --> Hmm... a prompt. Sending "ppp". pppd[0]: ppp pppd[0]: PPP: Not enabled pppd[0]: AT_V_TT02% pppd[0]: --> Don't know what to do! Starting pppd and hoping for the best. pppd[0]: Serial connection established. pppd[0]: Renamed interface ppp0 to modem0 pppd[0]: Using interface modem0 Status is: connecting pppd[0]: Connect: modem0 <--> /dev/ttyS1 and nothing happens more ... I stopped kinternet Status is: disconnecting pppd[0]: Terminating on signal 15 pppd[0]: Connection terminated. pppd[0]: Receive serial link is not 8-bit clean: pppd[0]: Problem: all had bit 7 set to 0 pppd[0]: Hangup (SIGHUP) pppd[0]: Modem hangup Status is: disconnected pppd[0] died: A modem hung up the phone (exit code 16) in Windows98 I am using 115,6 kb and have no problems but I'm not trying to something with setserial – it looks dangerous in the help -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.