https://bugzilla.novell.com/show_bug.cgi?id=656179 https://bugzilla.novell.com/show_bug.cgi?id=656179#c0 Summary: cciss driver do not allow reading SMART status from SATA disk Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Maintenance AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: andrew@joako.net QAContact: qa@suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:2.0b7) Gecko/20100101 Firefox/4.0b7 When using an HP SCSI raid controller smartctrl can read the SMART status of an individual disk in the RAID array. When attempting the same with a SAS controller and SATA disks, the operation gives errors. Reproducible: Always Steps to Reproduce: 1. Install openSUSE in a system with an HP SAS controller Actual Results: smartctrl errors out and only reads the disk's serial nr. Expected Results: smartctrl should return the same information as if the disk was attached directly to an AHCI-type non-RAID controller # smartctl -a /dev/cciss/c0d0 -d cciss,0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (openSUSE RPM) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Serial number: 9QF9TJ6S Device type: disk Local Time is: Sat Nov 27 21:59:32 2010 EST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported Log Sense failed, IE page [scsi response fails sanity test] Read defect list: asked for grown list but didn't get it -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.