https://bugzilla.novell.com/show_bug.cgi?id=440928 User suse-list3@bout-tyme.net added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c5 --- Comment #5 from Ken Schneider <suse-list3@bout-tyme.net> 2008-11-07 08:56:08 MST --- Created an attachment (id=250709) --> (https://bugzilla.novell.com/attachment.cgi?id=250709) YaST2 log files from Ken These are the y2log files from Ken Card info: 21: PCI 0a.0: 0200 Ethernet controller [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_10de_54c Unique ID: rBUF.Qh8YuQ9wg77 SysFS ID: /devices/pci0000:00/0000:00:0a.0 SysFS BusID: 0000:00:0a.0 Hardware Class: network Model: "nVidia MCP67 Ethernet" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x054c "MCP67 Ethernet" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x30cf Revision: 0xa2 Driver: "forcedeth" Driver Modules: "forcedeth" Device File: eth0 Memory Range: 0xf2588000-0xf2588fff (rw,non-prefetchable) I/O Ports: 0x30f8-0x30ff (rw) Memory Range: 0xf2589c00-0xf2589cff (rw,non-prefetchable) Memory Range: 0xf2589800-0xf258980f (rw,non-prefetchable) IRQ: 220 (16922354 events) HW Address: 00:1e:68:a5:f9:ea Link detected: yes Module Alias: "pci:v000010DEd0000054Csv0000103Csd000030CFbc02sc00i00" Driver Info #0: Driver Status: forcedeth is active Driver Activation Cmd: "modprobe forcedeth" Config Status: cfg=no, avail=yes, need=no, active=unknown 34: PCI 300.0: 0280 Network controller [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_14e4_4328 Unique ID: svHJ.XEGEu1Nec22 Parent ID: qnJ_.iXEd68VX6l3 SysFS ID: /devices/pci0000:00/0000:00:0d.0/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: network Model: "Broadcom BCM4328 802.11a/b/g/n" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x4328 "BCM4328 802.11a/b/g/n" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x1366 Revision: 0x03 Driver: "b43-pci-bridge" Driver Modules: "ssb" Memory Range: 0xf2200000-0xf2203fff (rw,non-prefetchable) Memory Range: 0xf2000000-0xf20fffff (rw,prefetchable) IRQ: 10 (913 events) Module Alias: "pci:v000014E4d00004328sv0000103Csd00001366bc02sc80i00" Driver Info #0: Driver Status: ssb is active Driver Activation Cmd: "modprobe ssb" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #23 (PCI bridge) 42: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_7d1_3c04_noserial_if0 Unique ID: KRJj.siZwOOFHzW4 Parent ID: uIhY.OqydEZZ981A SysFS ID: /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.0 SysFS BusID: 3-1:1.0 Hardware Class: unknown Model: "D-Link 802.11 bg WLAN" Hotplug: USB Vendor: usb 0x07d1 "D-Link System" Device: usb 0x3c04 "802.11 bg WLAN" Revision: "0.01" Driver: "rt73usb" Driver Modules: "rt73usb" Device File: wmaster0 Speed: 480 Mbps HW Address: 00:1e:58:b4:04:a7 Module Alias: "usb:v07D1p3C04d0001dc00dsc00dp00icFFiscFFipFF" Driver Info #0: Driver Status: rt73usb is active Driver Activation Cmd: "modprobe rt73usb" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #37 (Hub) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.