https://bugzilla.novell.com/show_bug.cgi?id=222128 Summary: modem not responding, althought during installation recognized Product: SUSE Linux 10.1 Version: Final Platform: i686 OS/Version: SLES 9 Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: mSvoboda@nusurf.at QAContact: jsrain@novell.com modem not responding, althought during installation recognized modem works with Windows98 and XP without problems install from DVD, language: german, first boot via floppy (later from /dev/hda4), standard pakages kinternet started, protocol: SuSE Meta pppd (smpppd-ifcfg), Version 1.59 on Chlada2006. Status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected Status is: connecting pppd[0]: Plugin passwordfd.so loaded. pppd[0]: --> WvDial: Internet dialer version 1.54.0 pppd[0]: --> Initializing modem. pppd[0]: --> Sending: ATZ pppd[0]: ATZ pppd[0]: --> Sending: ATQ0 pppd[0]: ATQ0 pppd[0]: --> Re-Sending: ATZ pppd[0]: ATZ pppd[0]: --> Modem not responding. pppd[0]: Connect script failed Status is: disconnected pppd[0] died: Connect script failed (exit code 8) modem, extern, analog # hwinfo --modem 32: Serial 00.0: 10200 Modem [Created at modem.446] Unique ID: i7s0.ypr6tQ5JI72 Parent ID: v9l_.3fyvFV+mbWD Hardware Class: modem Model: "U.S. Robotics 56K FAX EXT" Vendor: USR "U.S. Robotics, Inc." Device: eisa 0x00e8 "U.S. Robotics 56K FAX EXT" Compatible to: PNP 0xc107 Device File: /dev/ttyS1 Speed: 4.8 kbps Init1: ATZ Init2: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #24 (Serial controller) # modem is conected on VS-Com slot # lspci -vv Serial controller: Titan Electronics Inc VScom 210L 2 port serial and 1 port parallel adaptor (prog-if 02 [16550]) Subsystem: Titan Electronics Inc VScom 210L 2 port serial and 1 port parallel adaptor Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 169 Region 0: I/O ports at dff0 [size=8] Region 1: I/O ports at dfe0 [size=8] Region 2: I/O ports at dfa8 [size=8] Region 3: I/O ports at dfa0 [size=8] Region 4: Memory at feaffc00 (32-bit, non-prefetchable) [size=64] # setserial -g /dev/ttyS* /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 /dev/ttyS1, UART: 16550A, Port: 0xdfe0, IRQ: 169 /dev/ttyS2, UART: 16550A, Port: 0xdfa8, IRQ: 169 /dev/ttyS3, UART: unknown, Port: 0xdfa0, IRQ: 169 YAST modem konfiguration shows U.S. Robotics 56K FAX EXT Devicename: modem0 Mode: unknown Boot: auto computer BIOSDate: 06/23/05 BIOSName: American Megatrends BIOSVersion: BBS V3.20 0402 CPU: Pentium Pro MachineType: IBM PC/AT 2,5 GHz, 512 MB, 70 GB, 50 GB DOS and Win98, 800 MB swap, 20 GB root linux Suse Linux 10.1 (i586) version: Linux 2.6.16.13-4-default i686 KDE: 3.5.1 level “a” fstab /dev/hda4 / reiserfs acl,user_xattr 1 1 /dev/hda3 swap swap defaults 0 0 proc /proc proc defaults 0 0 sysfs /sys sysfs noauto 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 /dev/fd0 /media/floppy auto noauto,user,sync 0 0 /dev/hda1 /windows/C vfat users,gid=users,umask=0002,utf8=true 0 0 /dev/hda5 /windows/D vfat users,gid=users,umask=0002,utf8=true 0 0 /dev/hda6 /windows/E vfat users,gid=users,umask=0002,utf8=true 0 0 /dev/hda7 /windows/F vfat users,gid=users,umask=0002,utf8=true 0 0 /dev/hda8 /windows/G vfat users,gid=users,umask=0002,utf8=true 0 0 /dev/hda9 /windows/H vfat users,gid=users,umask=0002,utf8=true 0 0 /dev/hda10 /windows/I vfat users,gid=users,umask=0002,utf8=true 0 0 /dev/hda11 /windows/J vfat users,gid=users,umask=0002,utf8=true 0 0 /dev/hdc /media/cdrecorder subfs noauto,fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0 /dev/hdd /media/dvdrecorder subfs noauto,fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0 according to Suse hot-line, I used following boot parameter (with no effect) irqpoll pci=routeirq acpi=force acpi=noirq pci=acpi acpi_irq_balance acpi_irq_nobalance apic noapic lapic nolapic END -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.