http://bugzilla.suse.com/show_bug.cgi?id=1048934 http://bugzilla.suse.com/show_bug.cgi?id=1048934#c5 Scott Bahling <sbahling@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|FIXED |--- --- Comment #5 from Scott Bahling <sbahling@suse.com> --- hmmm. The kernel from home:tiwai:bnc1048934 is not working. I am seeing the staudio model being activated: [ 22.009551] snd_ice1712 0000:09:00.0: Using board model STAudio ADCIII But the channels are not being enabled on the expansion box. BTW, the PCI card used is a Hoontech STA DSP24. The ADCIII is an expansion box that connects to this PCI card via a proprietary interface most likely controlled by the GPIO bits. http://www.staudio.de/data/DSP24_English.PDF Here is the content of /proc/asound/card0/ice1712 with the kernel update: STAudio ADCIII at 0xa040, irq 20 EEPROM: Subvendor : 0x10002 Size : 28 bytes Version : 1 Codec : 0x2f ACLink : 0x80 I2S ID : 0x71 S/PDIF : 0x3 GPIO mask : 0xfc GPIO state : 0x2 GPIO direction : 0x3 AC'97 main : 0x0 AC'97 pcm : 0x0 AC'97 record : 0x0 AC'97 record src : 0x44 DAC ID #0 : 0x1 DAC ID #1 : 0x1 DAC ID #2 : 0x1 DAC ID #3 : 0x1 ADC ID #0 : 0x2 ADC ID #1 : 0x2 ADC ID #2 : 0x2 ADC ID #3 : 0x2 Registers: PSDOUT03 : 0x0000 CAPTURE : 0x00000000 SPDOUT : 0x0000 RATE : 0x00 GPIO_DATA : 0xbf GPIO_WRITE_MASK : 0xfc GPIO_DIRECTION : 0x43 -- You are receiving this mail because: You are on the CC list for the bug.