https://bugzilla.suse.com/show_bug.cgi?id=1218780 https://bugzilla.suse.com/show_bug.cgi?id=1218780#c7 Robert Riemann <robert-suse2@riemann.cc> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(robert-suse2@riem | |ann.cc), | |needinfo?(guillaume.gardet@ | |arm.com) | --- Comment #7 from Robert Riemann <robert-suse2@riemann.cc> --- I started with this: i+ | raspberrypi-firmware | Binary bootloader and firmware files for Raspberry Pi | package i+ | raspberrypi-firmware-config | Configuration for the Raspberry Pi firmware loader | package i+ | raspberrypi-firmware-dt | Device trees for the Raspberry Pi firmware loader | package Information for package raspberrypi-firmware: --------------------------------------------- Repository : openSUSE-Tumbleweed-Oss Name : raspberrypi-firmware Version : 2023.11.21-1.3 Arch : noarch Vendor : openSUSE Installed Size : 5.1 MiB Installed : Yes Status : out-of-date (version 2023.11.21-1.1 installed) Source package : raspberrypi-firmware-2023.11.21-1.3.src Upstream URL : https://github.com/raspberrypi/firmware/ Summary : Binary bootloader and firmware files for Raspberry Pi Description : Binary bootloader and firmware files for Raspberry Pi Information for package raspberrypi-firmware-config: ---------------------------------------------------- Repository : openSUSE-Tumbleweed-Oss Name : raspberrypi-firmware-config Version : 2023.11.21-1.3 Arch : noarch Vendor : openSUSE Installed Size : 3.0 KiB Installed : Yes Status : out-of-date (version 2023.11.21-1.1 installed) Source package : raspberrypi-firmware-config-2023.11.21-1.3.src Upstream URL : https://github.com/raspberrypi/firmware/ Summary : Configuration for the Raspberry Pi firmware loader Description : This package configures the Raspberry Pi boot process. 2 flavors are available: * raspberrypi-firmware-config - the default config * raspberrypi-firmware-config-camera - the config which enables start_x=1 and increase gpu_mem to be able to use a camera module Note: config.txt should not be used to set manually params (gpu_mem, etc.) please create extraconfig.txt instead. in /boot/efi/config.txt: [pi4] armstub=armstub8-rpi4.bin # Note that the 7" DSI panel isn't supported at the moment through VC4, users # can still use it through efifb by adding 'dtoverlay=disable-vc4' in # 'extraconfig.txt'. dtoverlay=vc4-kms-v3d-pi4,cma-default # dtoverlay=disable-v3d Then today on 7 Feb 2024, I run zypper dup. Then I got this: Information for package raspberrypi-firmware-config: ---------------------------------------------------- Repository : openSUSE-Tumbleweed-Oss Name : raspberrypi-firmware-config Version : 2023.11.21-1.3 Arch : noarch Vendor : openSUSE Installed Size : 3.0 KiB Installed : Yes Status : up-to-date Source package : raspberrypi-firmware-config-2023.11.21-1.3.src Upstream URL : https://github.com/raspberrypi/firmware/ Summary : Configuration for the Raspberry Pi firmware loader Description : This package configures the Raspberry Pi boot process. 2 flavors are available: * raspberrypi-firmware-config - the default config * raspberrypi-firmware-config-camera - the config which enables start_x=1 and increase gpu_mem to be able to use a camera module Note: config.txt should not be used to set manually params (gpu_mem, etc.) please create extraconfig.txt instead. [pi4] armstub=armstub8-rpi4.bin # Note that the 7" DSI panel isn't supported at the moment through VC4, users # can still use it through efifb by adding 'dtoverlay=disable-vc4' in # 'extraconfig.txt'. dtoverlay=vc4-kms-v3d-pi4,cma-default dtoverlay=disable-v3d rpm -ql raspberrypi-firmware-config /boot/vc/config.txt After reboot, v3d was not in use and the computer felt very slow. I then commented out again dtoverlay=disable-v3d and got a snappy computer after reboot. I hope this answers your question. If not, please be specific, so I can check again. -- You are receiving this mail because: You are on the CC list for the bug.