https://bugzilla.suse.com/show_bug.cgi?id=1230345 https://bugzilla.suse.com/show_bug.cgi?id=1230345#c3 --- Comment #3 from Ruediger Oertel <ro@suse.com> --- without multipath the "-V" ends with: zIPL environment block content: Preparing boot device for LD-IPL: sdb. Detected plain SCSI partition. Writing SCSI master boot record. Syncing disks... Done. and the strace ends with: 3467985 write(1, " initial ramdisk.: 0x00a20000"..., 44) = 44 3467985 write(1, " environment blk.: 0x00a18000"..., 44) = 44 3467985 lseek(3, 0, SEEK_CUR) = 49664 3467985 write(3, "zIPL\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512 3467985 fstatfs64(3, 88, {f_type=EXT2_SUPER_MAGIC, f_bsize=4096, f_blocks=1030072, f_bfree=943156, f_bavail=890728, f_files=262144, f_ffree=262115, f_fsid={val=[0xb175a6e9, 0x95ddf447]}, f_namelen=255, f_frsize=4096, f_flags=ST_VALID|ST_RELATIME}) = 0 3467985 ioctl(3, FS_IOC_FIEMAP, {fm_start=49664, fm_length=4096, fm_flags=FIEMAP_FLAG_SYNC, fm_extent_count=1} => {fm_flags=FIEMAP_FLAG_SYNC, fm_mapped_extents=1, ...}) = 0 3467985 write(1, "zIPL environment block content:\n", 32) = 32 3467985 lseek(3, 0, SEEK_CUR) = 50176 3467985 write(3, "zIPL\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0x@a\2\0\0\0\0\0\0\0"..., 512) = 512 3467985 fstatfs64(3, 88, {f_type=EXT2_SUPER_MAGIC, f_bsize=4096, f_blocks=1030072, f_bfree=943156, f_bavail=890728, f_files=262144, f_ffree=262115, f_fsid={val=[0xb175a6e9, 0x95ddf447]}, f_namelen=255, f_frsize=4096, f_flags=ST_VALID|ST_RELATIME}) = 0 3467985 ioctl(3, FS_IOC_FIEMAP, {fm_start=50176, fm_length=4096, fm_flags=FIEMAP_FLAG_SYNC, fm_extent_count=1} => {fm_flags=FIEMAP_FLAG_SYNC, fm_mapped_extents=1, ...}) = 0 3467985 write(1, "Preparing boot device for LD-IPL"..., 39) = 39 3467985 openat(AT_FDCWD, "/dev/zipl0000", O_RDWR) = 4 3467985 ioctl(4, BLKFLSBUF) = 0 3467985 lseek(4, 0, SEEK_SET) = 0 3467985 read(4, "zIPL\0\0\0\1\0\0\0\0\0\0\0\0\0\0\0\0\0x`\2\2\0\0\0\0\0\0\0"..., 512) = 512 3467985 write(1, "Detected plain SCSI partition.\n", 31) = 31 3467985 write(1, "Writing SCSI master boot record."..., 33) = 33 3467985 lseek(4, 0, SEEK_SET) = 0 3467985 write(4, "zIPL\0\0\0\1\0\0\0\0\0\0\0\0\0\0\0\0\0x@b\2\0\0\0\0\0\0\0"..., 512) = 512 3467985 fsync(4) = 0 3467985 close(4) = 0 3467985 openat(AT_FDCWD, "/etc/localtime", O_RDONLY|O_CLOEXEC) = 4 3467985 fstat(4, {st_mode=S_IFREG|0644, st_size=114, ...}) = 0 3467985 fstat(4, {st_mode=S_IFREG|0644, st_size=114, ...}) = 0 3467985 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 114 3467985 lseek(4, -60, SEEK_CUR) = 54 3467985 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 60 3467985 close(4) = 0 3467985 socket(AF_UNIX, SOCK_DGRAM|SOCK_CLOEXEC, 0) = 4 3467985 connect(4, {sa_family=AF_UNIX, sun_path="/dev/log"}, 110) = 0 3467985 send(4, "<14>Sep 11 16:23:44 zipl: Boot l"..., 60, MSG_NOSIGNAL) = 60 3467985 rename("/boot2/zipl/bootmap_temp.PbIcra", "/boot2/zipl/bootmap") = 0 3467985 close(3) = 0 3467985 unlink("/dev/zipl0000") = 0 3467985 write(1, "Syncing disks...\n", 17) = 17 3467985 sync() = 0 3467985 write(1, "Done.\n", 6) = 6 3467985 exit_group(0) = ? 3467985 +++ exited with 0 +++ -- You are receiving this mail because: You are on the CC list for the bug.