https://bugzilla.novell.com/show_bug.cgi?id=327510#c8 --- Comment #8 from m. bracher <mbra@gmx.ch> 2007-11-11 04:24:42 MST --- sorry for the delay Still the same problem, always 100M. It seems that the device ignores all settings of ethtool: # ethtool -s eth3 autoneg off # ethtool eth3 Settings for eth3: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 100baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x0000ffff (65535) Link detected: yes As you can see, autoneg is still ON -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.