https://bugzilla.novell.com/show_bug.cgi?id=334764#c4
--- Comment #4 from Daniel Schueler 2007-10-18 13:19:23 MST ---
Created an attachment (id=179312)
--> (https://bugzilla.novell.com/attachment.cgi?id=179312)
Scanimage debug output
i set a symLink /dev/scanner to /dev/sg5 before.
the hp in /etc/sane.d/dll.config is active (no #).
/etc/sane.d/hp.conf:
scsi HP
# Uncomment the following if you have "Error during device I/O" on SCSI
# option dumb-read
#
# The usual place for a SCSI-scanner on Linux
/dev/scanner
#
# USB-scanners supported by the hp-backend
# HP ScanJet 4100C
usb 0x03f0 0x0101
# HP ScanJet 5200C
usb 0x03f0 0x0401
# HP ScanJet 62X0C
usb 0x03f0 0x0201
# HP ScanJet 63X0C
usb 0x03f0 0x0601
#
# Uncomment the following if your scanner is connected by USB,
# but you are not using libusb
# /dev/usb/scanner0
# option connect-device
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.