https://bugzilla.novell.com/show_bug.cgi?id=208782 brunofr@ioda.net changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |brunofr@ioda.net ------- Comment #32 from brunofr@ioda.net 2006-10-09 01:46 MST ------- Just a word to say that the lastest kernel update 2.6.16.21-0.25-default comparing to the previous 2.6.16.21-0.21-default. We encounter here strange errors with the tape subsystem. This kernel was put on the system at 1st October, and from this date we can't use anymore our tape. mt -f /dev/st0 eject weof rewind -> ok tar -cvf /dev/st0 /usr -> error give a immediate result sequoia:~ # tar -cvf /dev/st0 /usr tar: Retrait de « / » de tête des noms des membres /usr/ /usr/X11R6/ /usr/X11R6/lib/ /usr/X11R6/lib/X11/ /usr/X11R6/lib/X11/icons/ /usr/X11R6/lib/X11/icons/crystalblue/ /usr/X11R6/lib/X11/icons/crystalblue/cursors/ /usr/X11R6/lib/X11/icons/crystalblue/cursors/base_arrow_down /usr/X11R6/lib/X11/icons/crystalblue/cursors/X_cursor /usr/X11R6/lib/X11/icons/crystalblue/cursors/00008160000006810000408080010102 tar: /dev/st0: ne peut write: Erreur d'entrée/sortie tar: Erreur non récupérable: fin de l'exécution immédiate ----------- As this system is a production server, we can't do so much test as kern has done. Especially as we can't do the data backup :-)) which was scheluded after the kernel update and reboot. Please feel free to ask all informations you need. ------- loading kernel module ------ Oct 8 14:45:43 sequoia kernel: PCI: Enabling device 0000:01:03.0 (0156 -> 0157) Oct 8 14:45:43 sequoia kernel: ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 28 (level, low) -> IRQ 177 Oct 8 14:45:48 sequoia kernel: scsi3 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 Oct 8 14:45:48 sequoia kernel: <Adaptec aic7892 Ultra160 SCSI adapter> Oct 8 14:45:48 sequoia kernel: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Oct 8 14:45:48 sequoia kernel: Oct 8 14:45:50 sequoia kernel: Vendor: ARCHIVE Model: Python 06240-XXX Rev: 8240 Oct 8 14:45:50 sequoia kernel: Type: Sequential-Access ANSI SCSI revision: 03 Oct 8 14:45:50 sequoia kernel: target3:0:5: Beginning Domain Validation Oct 8 14:45:50 sequoia kernel: target3:0:5: FAST-40 SCSI 40.0 MB/s ST (25 ns, offset 32) Oct 8 14:45:50 sequoia kernel: target3:0:5: Domain Validation skipping write tests Oct 8 14:45:50 sequoia kernel: target3:0:5: Ending Domain Validation Oct 8 14:45:50 sequoia kernel: st 3:0:5:0: Attached scsi tape st0<4>st0: try direct i/o: yes (alignment 512 B) Oct 8 14:45:50 sequoia kernel: st 3:0:5:0: Attached scsi generic sg0 type 1 Oct 8 14:46:59 sequoia kernel: st0: Block limits 1 - 16777215 bytes. ------ error during read/write tape operation ---------- Oct 9 09:41:57 sequoia kernel: (scsi3:A:5:0): Unexpected busfree in Data-out phase Oct 9 09:41:57 sequoia kernel: SEQADDR == 0x84 Oct 9 09:41:57 sequoia kernel: st0: Error 70000 (sugg. bt 0x0, driver bt 0x0, host bt 0x7). Oct 9 09:41:57 sequoia kernel: st0: Error with sense data: <6>st: Current: sense key: Unit Attention Oct 9 09:41:57 sequoia kernel: Additional sense: Power on, reset, or bus device reset occurred Oct 9 09:41:57 sequoia kernel: st0: Error on write filemark. ----- mt status ---------- mt -f /dev/st0 status drive type = Generic SCSI-2 tape drive status = 637534720 sense key error = 0 residue count = 0 file number = 0 block number = 0 Tape block size 512 bytes. Density code 0x26 (unknown). Soft error count since last status=0l General status bits on (41010000): BOT ONLINE IM_REP_EN -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.