https://bugzilla.novell.com/show_bug.cgi?id=408334 Summary: wake on lan not working with "VT6120/VT6121/VT6122 Gigabit Ethernet Adapter" Product: openSUSE 11.0 Version: Final Platform: x86 OS/Version: openSUSE 11.0 Status: NEW Severity: Minor Priority: P5 - None Component: Network AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: andreas.pfaller@gmail.com QAContact: qa@suse.de Found By: --- For some reason "wake-on-lan" is not working with this adapter. However if I insert "ifconfig eth1 192.168.1.7 up" immediately before the last line of /etc/init.d/halt everything works as expected. # ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: puag Wake-on: g Current message level: 0x00000002 (2) Link detected: yes # cat /etc/sysconfig/network/ifcfg-eth1 BOOTPROTO='static' IPADDR='192.168.1.7/24' BROADCAST='' STARTMODE='auto' NAME='VT6120/VT6121/VT6122 Gigabit Ethernet Adapter' ETHTOOL_OPTIONS='wol g' MTU='' NETWORK='' REMOTE_IPADDR='' USERCONTROL='no' # lspci -v ... 00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6120/VT6121/VT6122 Gigabit Ethernet Adapter (rev 11) Subsystem: Micro-Star International Co., Ltd. Device 0470 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 I/O ports at e400 [size=256] Memory at febf7c00 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Kernel driver in use: via-velocity Kernel modules: via-velocity .. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.