http://bugzilla.suse.com/show_bug.cgi?id=1102128 Bug ID: 1102128 Summary: values at sysctl.conf don't override default kernel parameter values Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers@forge.provo.novell.com Reporter: denis.polom@suse.com QA Contact: qa-bugs@suse.de Found By: --- Blocker: --- my sysctl.conf: --- net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1 --- after booting: --- # ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 2: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether e4:a4:71:15:26:71 brd ff:ff:ff:ff:ff:ff inet 192.168.1.237/24 brd 192.168.88.255 scope global dynamic noprefixroute wlp2s0 valid_lft 407sec preferred_lft 407sec inet6 fe80::d74b:c12f:6ad7:879b/64 scope link noprefixroute valid_lft forever preferred_lft forever --- after running command 'sysctl -p' kernel parameters are set vith values from sysctl.conf --- 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 2: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether e4:a4:71:15:26:71 brd ff:ff:ff:ff:ff:ff inet 192.168.1.237/24 brd 192.168.88.255 scope global dynamic noprefixroute wlp2s0 valid_lft 548sec preferred_lft 548sec --- -- You are receiving this mail because: You are on the CC list for the bug.