http://bugzilla.opensuse.org/show_bug.cgi?id=1208173 http://bugzilla.opensuse.org/show_bug.cgi?id=1208173#c2 --- Comment #2 from Aaron Puchert <aaronpuchert@alice-dsl.net> --- (In reply to Chester Lin from comment #1)
Could you add 'earlycon=sbi' and then remove the 'loglevel' limit from the kernel command line in grub2? It could help us to check what happened since the earlycon is disabled by default. Thanks.
Produces the exact same output, down to the addresses. Also adding ignore_loglevel to the command line and removing splash=silent, just to be safe, so I have linux /boot/Image-6.2.0-rc7-12-default root=UUID=[...] earlycon=sbi ignore_loglevel systemd.show_status=1 console=ttyS0,115200n changes nothing. Adding "insmod progress" in GRUB gives me: Loading Linux 6.2.0-rc7-12-default ... Loading initial ramdisk ... [ Image-6.2.0-rc7-12-d 28.02MiB 100% 11.00MiB/s ] EFI stub: Booting Linux Kernel... [ initrd-6.2.0-rc7-12- 94.82MiB 100% 12.67MiB/s ] EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path [...] So kernel and initrd are completely loaded. I don't think it matters, but a couple of seconds after the sbi_trap_error I get i2c read: write daddr 36 to i2c read: write daddr 36 to i2c read: write daddr 36 to i2c read: write daddr 36 to i2c read: write daddr 36 to i2c read: write daddr 36 to i2c read: write daddr 36 to i2c read: write daddr 36 to i2c read: write daddr 36 to i2c read: write daddr 36 to cannot read pmic power register -- You are receiving this mail because: You are on the CC list for the bug.