[Bug 619740] s2ram does not work on Dell PowerEdge 840

http://bugzilla.novell.com/show_bug.cgi?id=619740 http://bugzilla.novell.com/show_bug.cgi?id=619740#c6 --- Comment #6 from Thomas Wagner <wagner-thomas@gmx.at> 2010-07-06 16:17:34 UTC --- Here is the whole dmesg output of a starting process and several s2ram attemps (unfortunatley they do not appear). At "[ 0.112730] ACPI: (supports S0 S4 S5)" dmesg shows that actually S3 is not supported by ACPI. The Hardware actually should support ACPI. So why is S3 not available? dmesg output below: =================== [ 0.000000] Linux version 2.6.31.12-0.2-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 [ 0.000000] Command line: root=/dev/system/root resume=/dev/system/swap splash=silent quiet vga=0x0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffc0000 (usable) [ 0.000000] BIOS-e820: 00000000dffc0000 - 00000000dffcfc00 (ACPI data) [ 0.000000] BIOS-e820: 00000000dffcfc00 - 00000000dffff000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed13000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdffc0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable) [ 0.000000] modified: 0000000000100000 - 00000000dffc0000 (usable) [ 0.000000] modified: 00000000dffc0000 - 00000000dffcfc00 (ACPI data) [ 0.000000] modified: 00000000dffcfc00 - 00000000dffff000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed13000 - 00000000feda0000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dffc0000 [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dffc0000 page 4k [ 0.000000] kernel direct mapping tables up to dffc0000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ c000-12000 [ 0.000000] RAMDISK: 3794c000 - 37fefd99 [ 0.000000] ACPI: RSDP 00000000000f9e90 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000f9f04 0006C (v01 DELL PE_SC3 00000001 INTL 00000001) [ 0.000000] ACPI: FACP 00000000000f9ff4 000F4 (v03 DELL PE_SC3 00000001 INTL 00000001) [ 0.000000] ACPI: DSDT 00000000dffc0000 01F8A (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.000000] ACPI: FACS 00000000dffcfc00 00040 [ 0.000000] ACPI: APIC 00000000000fa0e8 00084 (v01 DELL PE_SC3 00000001 INTL 00000001) [ 0.000000] ACPI: SPCR 00000000000fa16c 00050 (v01 DELL PE_SC3 00000001 INTL 00000001) [ 0.000000] ACPI: HPET 00000000000fa1bc 00038 (v01 DELL PE_SC3 00000001 INTL 00000001) [ 0.000000] ACPI: MCFG 00000000000fa1f4 0003C (v01 DELL PE_SC3 00000001 INTL 00000001) [ 0.000000] ACPI: SLIC 00000000000fa230 00176 (v01 DELL PE_SC3 00000001 INTL 00000001) [ 0.000000] ACPI: SSDT 00000000dffc1f8a 00175 (v01 DELL PE_SC3 00000011 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000dffc2393 00175 (v01 DELL PE_SC3 00000011 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000dffc279c 00162 (v01 DELL PE_SC3 00000010 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [000000000000d000 - 0000000000024fff] [ 0.000000] bootmap [0000000000025000 - 0000000000048fff] pages 24 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001c4bf70] TEXT DATA BSS ==> [0001000000 - 0001c4bf70] [ 0.000000] #3 [003794c000 - 0037fefd99] RAMDISK ==> [003794c000 - 0037fefd99] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [0001c4c000 - 0001c4c220] BRK ==> [0001c4c000 - 0001c4c220] [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880001e00000-ffff8800057fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x000dffc0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048411 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 105 pages reserved [ 0.000000] DMA zone: 3834 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 899064 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[32]) [ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 32-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dffc0000 - 00000000dffcf000 [ 0.000000] PM: Registered nosave memory: 00000000dffcf000 - 00000000dffd0000 [ 0.000000] PM: Registered nosave memory: 00000000dffd0000 - 00000000dffff000 [ 0.000000] PM: Registered nosave memory: 00000000dffff000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed13000 [ 0.000000] PM: Registered nosave memory: 00000000fed13000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dffff000 (gap: dffff000:10001000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages at ffff88000584a000, static data 82784 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032178 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/system/root resume=/dev/system/swap splash=silent quiet vga=0x0 [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff8800058c3000 - ffff8800098c3000 [ 0.000000] software IO TLB at phys 0x58c3000 - 0x98c3000 [ 0.000000] Memory: 4047956k/4718592k available (5500k kernel code, 524948k absent, 145688k reserved, 4470k data, 980k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:984 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1867.072 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3734.14 BogoMIPS (lpj=1867072) [ 0.003083] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.003207] Security Framework initialized [ 0.003232] AppArmor: AppArmor initialized [ 0.004041] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.006840] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008234] Mount-cache hash table entries: 256 [ 0.008463] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008467] CPU: L2 cache: 2048K [ 0.008471] CPU 0/0x0 -> Node 0 [ 0.008474] CPU: Physical Processor ID: 0 [ 0.008475] CPU: Processor Core ID: 0 [ 0.008479] mce: CPU supports 6 MCE banks [ 0.008488] CPU0: Thermal monitoring enabled (TM1) [ 0.008493] using mwait in idle threads. [ 0.008496] Performance Counters: Core2 events, Intel PMU driver. [ 0.008503] ... version: 2 [ 0.008505] ... bit width: 40 [ 0.008506] ... generic counters: 2 [ 0.008508] ... value mask: 000000ffffffffff [ 0.008510] ... max period: 000000007fffffff [ 0.008512] ... fixed-purpose counters: 3 [ 0.008514] ... counter mask: 0000000700000003 [ 0.009661] ACPI: Core revision 20090521 [ 0.013825] Setting APIC routing to flat [ 0.014248] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024163] CPU0: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz stepping 02 [ 0.024996] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 3733.46 BogoMIPS (lpj=1866730) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 2048K [ 0.000999] CPU 1/0x1 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] mce: CPU supports 6 MCE banks [ 0.000999] CPU1: Thermal monitoring enabled (TM2) [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.096642] CPU1: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz stepping 02 [ 0.096652] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.097022] Brought up 2 CPUs [ 0.097022] Total of 2 processors activated (7467.60 BogoMIPS). [ 0.097074] CPU0 attaching sched-domain: [ 0.097077] domain 0: span 0-1 level MC [ 0.097081] groups: 0 1 [ 0.097088] CPU1 attaching sched-domain: [ 0.097090] domain 0: span 0-1 level MC [ 0.097093] groups: 1 0 [ 0.099054] devtmpfs: initialized [ 0.104003] Booting paravirtualized kernel on bare hardware [ 0.104173] regulator: core version 0.5 [ 0.104173] Time: 15:35:43 Date: 07/06/10 [ 0.104173] NET: Registered protocol family 16 [ 0.104278] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.104282] ACPI: bus type pci registered [ 0.104347] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.104351] PCI: MCFG area at f0000000 reserved in E820 [ 0.106345] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.106348] PCI: Using configuration type 1 for base access [ 0.108093] bio: create slab <bio-0> at 0 [ 0.108210] ACPI: EC: Look up EC in DSDT [ 0.112558] ACPI: BIOS _OSI(Linux) query ignored [ 0.112726] ACPI: Interpreter enabled [ 0.112730] ACPI: (supports S0 S4 S5) [ 0.112754] ACPI: Using IOAPIC for interrupt routing [ 0.116771] ACPI: No dock devices found. [ 0.117799] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.117996] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.118001] pci 0000:00:01.0: PME# disabled [ 0.118090] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.118094] pci 0000:00:1c.0: PME# disabled [ 0.118160] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.118164] pci 0000:00:1c.4: PME# disabled [ 0.118229] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.118234] pci 0000:00:1c.5: PME# disabled [ 0.118282] pci 0000:00:1d.0: reg 20 io port: [0xbce0-0xbcff] [ 0.118334] pci 0000:00:1d.1: reg 20 io port: [0xbcc0-0xbcdf] [ 0.118384] pci 0000:00:1d.2: reg 20 io port: [0xbca0-0xbcbf] [ 0.118442] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeb00400-0xfeb007ff] [ 0.118494] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.118499] pci 0000:00:1d.7: PME# disabled [ 0.118622] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.118627] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO [ 0.118631] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) [ 0.118635] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 0.118640] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e8 (mask 0003) [ 0.118682] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.118689] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.118696] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.118702] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.118709] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.118752] pci 0000:00:1f.2: reg 10 io port: [0xbc98-0xbc9f] [ 0.118759] pci 0000:00:1f.2: reg 14 io port: [0xbc90-0xbc93] [ 0.118765] pci 0000:00:1f.2: reg 18 io port: [0xbc80-0xbc87] [ 0.118771] pci 0000:00:1f.2: reg 1c io port: [0xbc78-0xbc7b] [ 0.118778] pci 0000:00:1f.2: reg 20 io port: [0xbc60-0xbc6f] [ 0.118784] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfeb00000-0xfeb003ff] [ 0.118806] pci 0000:00:1f.2: PME# supported from D3hot [ 0.118810] pci 0000:00:1f.2: PME# disabled [ 0.118856] pci 0000:00:1f.3: reg 20 io port: [0x8c0-0x8df] [ 0.118915] pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled [ 0.118947] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.118952] pci 0000:01:00.0: PME# disabled [ 0.118980] pci 0000:01:00.1: reg 10 32bit mmio: [0xfe7ff000-0xfe7fffff] [ 0.119068] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] [ 0.119072] pci 0000:00:01.0: bridge 32bit mmio: [0xfe700000-0xfeafffff] [ 0.119130] pci 0000:02:08.0: reg 10 io port: [0xec00-0xecff] [ 0.119141] pci 0000:02:08.0: reg 14 64bit mmio: [0xfe9fc000-0xfe9fffff] [ 0.119152] pci 0000:02:08.0: reg 1c 64bit mmio: [0xfe9e0000-0xfe9effff] [ 0.119162] pci 0000:02:08.0: reg 30 32bit mmio: [0xfea00000-0xfeafffff] [ 0.119188] pci 0000:02:08.0: supports D1 D2 [ 0.119229] pci 0000:01:00.0: bridge io port: [0xe000-0xefff] [ 0.119233] pci 0000:01:00.0: bridge 32bit mmio: [0xfe900000-0xfeafffff] [ 0.119286] pci 0000:03:00.0: PXH quirk detected; SHPC device MSI disabled [ 0.119331] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.119336] pci 0000:03:00.0: PME# disabled [ 0.119402] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff] [ 0.119541] pci 0000:05:00.0: reg 10 64bit mmio: [0xfe4f0000-0xfe4fffff] [ 0.119615] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 0.119621] pci 0000:05:00.0: PME# disabled [ 0.119673] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] [ 0.119677] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe400000-0xfe5fffff] [ 0.119767] pci 0000:07:00.0: reg 10 io port: [0xcc00-0xccff] [ 0.119775] pci 0000:07:00.0: reg 14 32bit mmio: [0xfe2ffc00-0xfe2ffcff] [ 0.119802] pci 0000:07:00.0: reg 30 32bit mmio: [0xfe300000-0xfe31ffff] [ 0.119822] pci 0000:07:00.0: supports D1 D2 [ 0.119825] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.119830] pci 0000:07:00.0: PME# disabled [ 0.119873] pci 0000:07:05.0: reg 10 32bit mmio: [0xe8000000-0xefffffff] [ 0.119881] pci 0000:07:05.0: reg 14 io port: [0xc800-0xc8ff] [ 0.119888] pci 0000:07:05.0: reg 18 32bit mmio: [0xfe2e0000-0xfe2effff] [ 0.119911] pci 0000:07:05.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.119931] pci 0000:07:05.0: supports D1 D2 [ 0.119977] pci 0000:00:1e.0: transparent bridge [ 0.119986] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] [ 0.119991] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe200000-0xfe3fffff] [ 0.119997] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe8000000-0xefffffff] [ 0.120023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.120256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PES1._PRT] [ 0.120359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP0._PRT] [ 0.120465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP0.PXHA._PRT] [ 0.120618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP1._PRT] [ 0.120720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP2._PRT] [ 0.120821] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT] [ 0.123428] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12) [ 0.123552] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. [ 0.123677] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12) [ 0.123800] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12) [ 0.123922] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12) [ 0.124050] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12) [ 0.124172] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12) [ 0.124292] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. [ 0.124527] SCSI subsystem initialized [ 0.125002] libata version 3.00 loaded. [ 0.125033] usbcore: registered new interface driver usbfs [ 0.125035] usbcore: registered new interface driver hub [ 0.125041] usbcore: registered new device driver usb [ 0.125041] PCI: Using ACPI for IRQ routing [ 0.127022] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.127030] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.132195] AppArmor: AppArmor Filesystem Enabled [ 0.134741] pnp: PnP ACPI init [ 0.134756] ACPI: bus type pnp registered [ 0.139455] pnp: PnP ACPI: found 11 devices [ 0.139459] ACPI: ACPI bus type pnp unregistered [ 0.139473] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.139477] system 00:07: ioport range 0x880-0x8bf has been reserved [ 0.139480] system 00:07: ioport range 0x8c0-0x8df has been reserved [ 0.139483] system 00:07: ioport range 0x8e0-0x8e3 has been reserved [ 0.139487] system 00:07: ioport range 0xc00-0xc0f has been reserved [ 0.139490] system 00:07: ioport range 0xc10-0xc1f has been reserved [ 0.139493] system 00:07: ioport range 0xca0-0xca7 has been reserved [ 0.139496] system 00:07: ioport range 0xca9-0xcab has been reserved [ 0.139500] system 00:07: ioport range 0xcad-0xcaf has been reserved [ 0.139503] system 00:07: ioport range 0xc20-0xc3f has been reserved [ 0.139511] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.144364] pci 0000:07:00.0: BAR 6: address space collision on of device [0xfe300000-0xfe31ffff] [ 0.144480] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 0.144484] pci 0000:01:00.0: IO window: 0xe000-0xefff [ 0.144490] pci 0000:01:00.0: MEM window: 0xfe900000-0xfeafffff [ 0.144494] pci 0000:01:00.0: PREFETCH window: disabled [ 0.144498] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.144501] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.144505] pci 0000:00:01.0: MEM window: 0xfe700000-0xfeafffff [ 0.144509] pci 0000:00:01.0: PREFETCH window: disabled [ 0.144512] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 0.144515] pci 0000:03:00.0: IO window: disabled [ 0.144520] pci 0000:03:00.0: MEM window: disabled [ 0.144525] pci 0000:03:00.0: PREFETCH window: disabled [ 0.144530] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 [ 0.144532] pci 0000:00:1c.0: IO window: disabled [ 0.144537] pci 0000:00:1c.0: MEM window: 0xfe600000-0xfe6fffff [ 0.144541] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.144546] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05 [ 0.144549] pci 0000:00:1c.4: IO window: 0xd000-0xdfff [ 0.144554] pci 0000:00:1c.4: MEM window: 0xfe400000-0xfe5fffff [ 0.144559] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.144563] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06 [ 0.144565] pci 0000:00:1c.5: IO window: disabled [ 0.144570] pci 0000:00:1c.5: MEM window: disabled [ 0.144574] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.144581] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 [ 0.144585] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.144590] pci 0000:00:1e.0: MEM window: 0xfe200000-0xfe3fffff [ 0.144595] pci 0000:00:1e.0: PREFETCH window: 0x000000e8000000-0x000000efffffff [ 0.144608] alloc irq_desc for 16 on node 0 [ 0.144611] alloc kstat_irqs on node 0 [ 0.144618] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.144622] pci 0000:00:01.0: setting latency timer to 64 [ 0.144630] pci 0000:01:00.0: setting latency timer to 64 [ 0.144638] alloc irq_desc for 21 on node 0 [ 0.144640] alloc kstat_irqs on node 0 [ 0.144644] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.144649] pci 0000:00:1c.0: setting latency timer to 64 [ 0.144659] pci 0000:03:00.0: setting latency timer to 64 [ 0.144667] alloc irq_desc for 22 on node 0 [ 0.144669] alloc kstat_irqs on node 0 [ 0.144673] pci 0000:00:1c.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.144677] pci 0000:00:1c.4: setting latency timer to 64 [ 0.144685] alloc irq_desc for 23 on node 0 [ 0.144687] alloc kstat_irqs on node 0 [ 0.144692] pci 0000:00:1c.5: PCI INT C -> GSI 23 (level, low) -> IRQ 23 [ 0.144696] pci 0000:00:1c.5: setting latency timer to 64 [ 0.144703] pci 0000:00:1e.0: setting latency timer to 64 [ 0.144708] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.144711] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.144714] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.144717] pci_bus 0000:01: resource 1 mem: [0xfe700000-0xfeafffff] [ 0.144719] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.144722] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfeafffff] [ 0.144725] pci_bus 0000:03: resource 1 mem: [0xfe600000-0xfe6fffff] [ 0.144728] pci_bus 0000:05: resource 0 io: [0xd000-0xdfff] [ 0.144731] pci_bus 0000:05: resource 1 mem: [0xfe400000-0xfe5fffff] [ 0.144734] pci_bus 0000:07: resource 0 io: [0xc000-0xcfff] [ 0.144741] pci_bus 0000:07: resource 1 mem: [0xfe200000-0xfe3fffff] [ 0.144744] pci_bus 0000:07: resource 2 pref mem [0xe8000000-0xefffffff] [ 0.144746] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 0.144749] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.144830] NET: Registered protocol family 2 [ 0.145076] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.146679] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.152276] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.152983] TCP: Hash tables configured (established 524288 bind 65536) [ 0.152986] TCP reno registered [ 0.153183] NET: Registered protocol family 1 [ 0.153272] Unpacking initramfs... [ 0.305157] Freeing initrd memory: 6799k freed [ 0.308489] Scanning for low memory corruption every 60 seconds [ 0.308753] audit: initializing netlink socket (disabled) [ 0.308773] type=2000 audit(1278430542.308:1): initialized [ 0.312957] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.313128] VFS: Disk quotas dquot_6.5.2 [ 0.313174] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.313358] msgmni has been set to 1979 [ 0.313474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.313478] io scheduler noop registered [ 0.313480] io scheduler anticipatory registered [ 0.313483] io scheduler deadline registered [ 0.313506] io scheduler cfq registered (default) [ 0.313675] PCI quirk: reroute interrupts for 0x8086:0x032c [ 0.313682] PCI quirk: reroute interrupts for 0x8086:0x032c [ 0.313692] pci 0000:07:05.0: Boot video device [ 0.313861] alloc irq_desc for 56 on node 0 [ 0.313864] alloc kstat_irqs on node 0 [ 0.313876] pcieport-driver 0000:00:01.0: irq 56 for MSI/MSI-X [ 0.313883] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.314039] alloc irq_desc for 57 on node 0 [ 0.314042] alloc kstat_irqs on node 0 [ 0.314052] pcieport-driver 0000:00:1c.0: irq 57 for MSI/MSI-X [ 0.314060] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.314200] alloc irq_desc for 58 on node 0 [ 0.314203] alloc kstat_irqs on node 0 [ 0.314211] pcieport-driver 0000:00:1c.4: irq 58 for MSI/MSI-X [ 0.314219] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.314363] alloc irq_desc for 59 on node 0 [ 0.314366] alloc kstat_irqs on node 0 [ 0.314374] pcieport-driver 0000:00:1c.5: irq 59 for MSI/MSI-X [ 0.314383] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.314579] pci-stub: invalid id string "" [ 0.316441] Non-volatile memory driver v1.3 [ 0.316444] Linux agpgart interface v0.103 [ 0.316469] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.316563] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.317040] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.317280] ata_piix 0000:00:1f.1: version 2.13 [ 0.317289] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A [ 0.317328] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.317403] scsi0 : ata_piix [ 0.317508] scsi1 : ata_piix [ 0.317547] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 0.317550] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 0.317755] ata2: port disabled. ignoring. [ 0.318753] alloc irq_desc for 20 on node 0 [ 0.318756] alloc kstat_irqs on node 0 [ 0.318764] ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.318770] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.471176] ata1: clearing spurious IRQ [ 0.472095] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.472155] scsi2 : ata_piix [ 0.472232] scsi3 : ata_piix [ 0.472278] ata3: SATA max UDMA/133 cmd 0xbc98 ctl 0xbc90 bmdma 0xbc60 irq 20 [ 0.472282] ata4: SATA max UDMA/133 cmd 0xbc80 ctl 0xbc78 bmdma 0xbc68 irq 20 [ 0.472407] Fixed MDIO Bus: probed [ 0.472415] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.472462] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.472482] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.472486] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.472518] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.472534] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.474387] ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0D08, max UDMA/33 [ 0.474483] ata1: clearing spurious IRQ [ 0.476433] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.476440] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.476446] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfeb00400 [ 0.477198] ata1: clearing spurious IRQ [ 0.480276] ata1.00: configured for UDMA/33 [ 0.484256] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0D08 PQ: 0 ANSI: 5 [ 0.486267] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.486308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.486312] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.486315] usb usb1: Product: EHCI Host Controller [ 0.486318] usb usb1: Manufacturer: Linux 2.6.31.12-0.2-desktop ehci_hcd [ 0.486321] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.486405] usb usb1: configuration #1 chosen from 1 choice [ 0.486446] hub 1-0:1.0: USB hub found [ 0.486456] hub 1-0:1.0: 6 ports detected [ 0.486542] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.486562] uhci_hcd: USB Universal Host Controller Interface driver [ 0.488014] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.488021] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.488026] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.488038] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.488067] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bce0 [ 0.488109] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.488112] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.488115] usb usb2: Product: UHCI Host Controller [ 0.488118] usb usb2: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd [ 0.488121] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.488198] usb usb2: configuration #1 chosen from 1 choice [ 0.488234] hub 2-0:1.0: USB hub found [ 0.488253] hub 2-0:1.0: 2 ports detected [ 0.490052] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.490059] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.490064] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.490077] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.490111] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bcc0 [ 0.490154] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.490157] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.490160] usb usb3: Product: UHCI Host Controller [ 0.490163] usb usb3: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd [ 0.490166] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.490244] usb usb3: configuration #1 chosen from 1 choice [ 0.490279] hub 3-0:1.0: USB hub found [ 0.490297] hub 3-0:1.0: 2 ports detected [ 0.492092] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.492099] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.492103] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.492115] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.492150] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bca0 [ 0.492192] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.492195] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.492198] usb usb4: Product: UHCI Host Controller [ 0.492201] usb usb4: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd [ 0.492204] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.492283] usb usb4: configuration #1 chosen from 1 choice [ 0.492319] hub 4-0:1.0: USB hub found [ 0.492339] hub 4-0:1.0: 2 ports detected [ 0.492407] Initializing USB Mass Storage driver... [ 0.492440] usbcore: registered new interface driver usb-storage [ 0.492443] USB Mass Storage support registered. [ 0.492471] usbcore: registered new interface driver libusual [ 0.492485] usbcore: registered new interface driver ums-alauda [ 0.492498] usbcore: registered new interface driver ums-cypress [ 0.492511] usbcore: registered new interface driver ums-datafab [ 0.492526] usbcore: registered new interface driver ums-freecom [ 0.492539] usbcore: registered new interface driver ums-isd200 [ 0.492554] usbcore: registered new interface driver ums-jumpshot [ 0.492567] usbcore: registered new interface driver ums-karma [ 0.492580] usbcore: registered new interface driver ums-onetouch [ 0.492593] usbcore: registered new interface driver ums-sddr09 [ 0.492606] usbcore: registered new interface driver ums-sddr55 [ 0.492619] usbcore: registered new interface driver ums-usbat [ 0.492672] PNP: No PS/2 controller found. Probing ports directly. [ 0.495210] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.495216] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.495287] mice: PS/2 mouse device common for all mice [ 0.495385] rtc_cmos 00:04: RTC can wake from S4 [ 0.495448] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.495474] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.495487] cpuidle: using governor ladder [ 0.495490] cpuidle: using governor menu [ 0.495792] usbcore: registered new interface driver hiddev [ 0.495809] usbcore: registered new interface driver usbhid [ 0.495812] usbhid: v2.6:USB HID core driver [ 0.504114] Switched to high resolution mode on CPU 1 [ 0.504409] Switched to high resolution mode on CPU 0 [ 0.607522] TCP cubic registered [ 0.607597] NET: Registered protocol family 10 [ 0.608143] lo: Disabled Privacy Extensions [ 0.608532] lib80211: common routines for IEEE802.11 drivers [ 0.608535] lib80211_crypt: registered algorithm 'NULL' [ 0.608643] PM: Checking image partition /dev/system/swap [ 0.704704] PM: Resume from disk failed. [ 0.704722] registered taskstats version 1 [ 0.704885] Magic number: 2:77:588 [ 0.704967] rtc_cmos 00:04: setting system clock to 2010-07-06 15:35:43 UTC (1278430543) [ 0.705047] Freeing unused kernel memory: 980k freed [ 0.705298] Write protecting the kernel read-only data: 8860k [ 0.749465] Fusion MPT base driver 3.04.10 [ 0.749469] Copyright (c) 1999-2008 LSI Corporation [ 0.759916] Fusion MPT SAS Host driver 3.04.10 [ 0.759999] mptsas 0000:02:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.760154] mptbase: ioc0: Initiating bringup [ 1.016033] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 1.038028] ioc0: LSISAS1068 B0: Capabilities={Initiator} [ 1.181024] usb 3-2: New USB device found, idVendor=046d, idProduct=c018 [ 1.181028] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.181031] usb 3-2: Product: USB Optical Mouse [ 1.181034] usb 3-2: Manufacturer: Logitech [ 1.181145] usb 3-2: configuration #1 chosen from 1 choice [ 1.197327] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input0 [ 1.197419] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0 [ 1.403031] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 1.565993] usb 4-1: New USB device found, idVendor=413c, idProduct=2005 [ 1.565998] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.566007] usb 4-1: Product: DELL USB Keyboard [ 1.566010] usb 4-1: Manufacturer: DELL [ 1.566081] usb 4-1: configuration #1 chosen from 1 choice [ 1.584340] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input1 [ 1.584405] generic-usb 0003:413C:2005.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.2-1/input0 [ 2.796421] scsi4 : ioc0: LSISAS1068 B0, FwRev=00063200h, Ports=1, MaxQ=511, IRQ=16 [ 2.808899] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 32, phy 0, sas_addr 0x1221000000000000 [ 2.810944] scsi 4:0:0:0: Direct-Access ATA WDC WD2500JS-75N 2E04 PQ: 0 ANSI: 5 [ 2.812930] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000 [ 2.814832] scsi 4:0:1:0: Direct-Access ATA WDC WD2500JS-75N 2E04 PQ: 0 ANSI: 5 [ 2.816903] mptsas: ioc0: attaching raid volume, channel 1, id 0 [ 2.817394] scsi 4:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5 [ 2.821062] sd 4:1:0:0: [sda] READ CAPACITY(16) failed [ 2.821066] sd 4:1:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2.821071] sd 4:1:0:0: [sda] Sense Key : Illegal Request [current] [ 2.821077] sd 4:1:0:0: [sda] Add. Sense: No additional sense information [ 2.821227] sd 4:1:0:0: [sda] 486326272 512-byte logical blocks: (248 GB/231 GiB) [ 2.821783] sd 4:1:0:0: [sda] Write Protect is off [ 2.821786] sd 4:1:0:0: [sda] Mode Sense: 03 00 00 08 [ 2.822153] sd 4:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.822897] sd 4:1:0:0: [sda] READ CAPACITY(16) failed [ 2.822900] sd 4:1:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2.822904] sd 4:1:0:0: [sda] Sense Key : Illegal Request [current] [ 2.822909] sd 4:1:0:0: [sda] Add. Sense: No additional sense information [ 2.823966] sda: sda1 sda2 [ 2.857970] sd 4:1:0:0: [sda] READ CAPACITY(16) failed [ 2.857974] sd 4:1:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2.857978] sd 4:1:0:0: [sda] Sense Key : Illegal Request [current] [ 2.857983] sd 4:1:0:0: [sda] Add. Sense: No additional sense information [ 2.859038] sd 4:1:0:0: [sda] Attached SCSI disk [ 2.872874] Uniform Multi-Platform E-IDE driver [ 2.883136] processor LNXCPU:00: registered as cooling_device0 [ 2.883382] processor LNXCPU:01: registered as cooling_device1 [ 2.895096] device-mapper: uevent: version 1.0.3 [ 2.895228] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.907125] udev: starting version 146 [ 3.528866] md: linear personality registered for level -1 [ 3.636035] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 3.636040] PM: Marking nosave pages: 00000000000a0000 - 0000000000100000 [ 3.636046] PM: Marking nosave pages: 00000000dffc0000 - 0000000100000000 [ 3.636524] PM: Basic memory bitmaps created [ 3.658904] PM: Basic memory bitmaps freed [ 3.667854] PM: Starting manual resume from disk [ 3.667859] PM: Resume from partition 253:2 [ 3.667861] PM: Checking hibernation image. [ 3.668069] PM: Resume from disk failed. [ 3.785717] EXT4-fs (dm-1): barriers enabled [ 3.785904] kjournald2 starting: pid 285, dev dm-1:8, commit interval 5 seconds [ 3.795802] EXT4-fs (dm-1): internal journal on dm-1:8 [ 3.795808] EXT4-fs (dm-1): delayed allocation enabled [ 3.795812] EXT4-fs: file extents enabled [ 3.795954] EXT4-fs: mballoc enabled [ 3.795973] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 5.127013] preloadtrace: systemtap: 1.0/0.142, base: ffffffffa0168000, memory: 49756+81492+26032+14000 data+text+ctx+net, probes: 44 [ 6.396460] udev: starting version 146 [ 6.435471] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 6.435532] ACPI: Power Button [PWRF] [ 6.440482] EDAC MC: Ver: 2.1.0 Mar 17 2010 [ 6.442318] EDAC MC0: Giving out device to 'i3000_edac' 'i3000': DEV 0000:00:00.0 [ 6.442344] EDAC PCI0: Giving out device to module 'i3000_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED) [ 6.455215] Floppy drive(s): fd0 is 1.44M [ 6.468989] FDC 0 is a National Semiconductor PC87306 [ 6.470439] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.482148] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.495024] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.495053] alloc irq_desc for 18 on node 0 [ 6.495056] alloc kstat_irqs on node 0 [ 6.495066] r8169 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.495115] r8169 0000:07:00.0: no PCI Express capability [ 6.495847] eth0: RTL8110s at 0xffffc90000656c00, 00:1e:2a:be:01:65, XID 04000000 IRQ 18 [ 6.501711] intel_rng: FWH not detected [ 6.512026] tg3.c:v3.99 (April 20, 2009) [ 6.512045] tg3 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.512055] tg3 0000:05:00.0: setting latency timer to 64 [ 6.514082] tg3 0000:05:00.0: PME# disabled [ 6.522364] eth1: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:18:8b:e6:84:70 [ 6.522369] eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 6.522373] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 6.522376] eth1: dma_rwctrl[76180000] dma_mask[64-bit] [ 6.560084] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 6.564505] Fusion MPT misc device (ioctl) driver 3.04.10 [ 6.564564] mptctl: Registered with Fusion MPT base driver [ 6.564567] mptctl: /dev/mptctl @ (major,minor=10,220) [ 6.566033] i801_smbus 0000:00:1f.3: can't derive routing for PCI INT B [ 6.566037] i801_smbus 0000:00:1f.3: PCI INT B: no GSI [ 6.576585] iTCO_vendor_support: vendor-support=0 [ 6.577845] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 6.577961] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 6.578053] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.582290] eth0 renamed to eth0_rename by udevd [381] [ 6.584632] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 6.593763] eth1 renamed to eth0 by udevd [383] [ 6.595046] udev: renamed network interface eth1 to eth0 [ 6.597236] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 6.597241] Uniform CD-ROM driver Revision: 3.20 [ 6.597380] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 6.599872] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 6.599952] scsi 4:0:0:0: Attached scsi generic sg1 type 0 [ 6.600026] scsi 4:0:1:0: Attached scsi generic sg2 type 0 [ 6.600102] sd 4:1:0:0: Attached scsi generic sg3 type 0 [ 6.633317] eth0_rename renamed to eth1 by udevd [381] [ 6.634157] udev: renamed network interface eth0_rename to eth1 [ 7.129532] Adding 2097144k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:2097144k [ 8.986944] loop: module loaded [ 9.073990] EXT4-fs (sda1): barriers enabled [ 9.075441] kjournald2 starting: pid 770, dev sda1:8, commit interval 5 seconds [ 9.091553] EXT4-fs (sda1): internal journal on sda1:8 [ 9.091559] EXT4-fs (sda1): delayed allocation enabled [ 9.091563] EXT4-fs: file extents enabled [ 9.091614] EXT4-fs: mballoc enabled [ 9.091633] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 9.099932] EXT4-fs (dm-0): barriers enabled [ 9.119741] kjournald2 starting: pid 773, dev dm-0:8, commit interval 5 seconds [ 9.135045] EXT4-fs (dm-0): internal journal on dm-0:8 [ 9.135051] EXT4-fs (dm-0): delayed allocation enabled [ 9.135055] EXT4-fs: file extents enabled [ 9.135606] EXT4-fs: mballoc enabled [ 9.135621] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 9.269081] fuse init (API version 7.12) [ 10.817233] type=1505 audit(1278430553.612:2): operation="profile_load" pid=1052 name=/bin/ping [ 10.851752] type=1505 audit(1278430553.646:3): operation="profile_load" pid=1053 name=/sbin/klogd [ 10.915440] type=1505 audit(1278430553.710:4): operation="profile_load" pid=1054 name=/sbin/syslog-ng [ 10.984744] type=1505 audit(1278430553.779:5): operation="profile_load" pid=1055 name=/sbin/syslogd [ 11.050966] type=1505 audit(1278430553.845:6): operation="profile_load" pid=1056 name=/usr/sbin/avahi-daemon [ 11.110040] type=1505 audit(1278430553.905:7): operation="profile_load" pid=1057 name=/usr/sbin/identd [ 11.171503] type=1505 audit(1278430553.966:8): operation="profile_load" pid=1058 name=/usr/sbin/mdnsd [ 11.251213] type=1505 audit(1278430554.046:9): operation="profile_load" pid=1059 name=/usr/sbin/named [ 11.320906] type=1505 audit(1278430554.115:10): operation="profile_load" pid=1060 name=/usr/sbin/nscd [ 11.411980] type=1505 audit(1278430554.206:11): operation="profile_load" pid=1061 name=/usr/sbin/ntpd [ 13.186409] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 13.221538] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.234878] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 13.480390] alloc irq_desc for 19 on node 0 [ 13.480394] alloc kstat_irqs on node 0 [ 13.480405] pci 0000:07:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 14.987465] tg3 0000:05:00.0: PME# disabled [ 15.045688] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.122184] NET: Registered protocol family 17 [ 17.381320] tg3: eth0: Link is up at 1000 Mbps, full duplex. [ 17.381329] tg3: eth0: Flow control is on for TX and on for RX. [ 17.381874] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.151897] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 27.591025] eth0: no IPv6 routers present -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.