https://bugzilla.novell.com/show_bug.cgi?id=362850 User dkukawka@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=362850#c11 Danny Kukawka <dkukawka@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |dkukawka@novell.com AssignedTo|dkukawka@novell.com |kernel-maintainers@forge.provo.novell.com Status|NEEDINFO |NEW Component|Hotplug |Kernel Info Provider|puetz-tobias@web.de | --- Comment #11 from Danny Kukawka <dkukawka@novell.com> 2008-02-25 04:49:23 MST --- Due to the following messages I assume there is a hardware or kernel problem which cause hal to ignore the device: -------------------------------------------- Feb 24 17:56:11 linbox kernel: scsi 6:0:0:1: Direct-Access EM853RB USB SD 1.00 PQ: 0 ANSI: 0 CCS Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Very big device. Trying to use READ CAPACITY(16). Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] READ CAPACITY(16) failed Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK,SUGGEST_OK Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Use 0xffffffff as device size Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Sector size 0 reported, assuming 512. Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] 4294967296 512-byte hardware sectors (2199023 MB) Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Write Protect is off Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Mode Sense: 03 00 00 00 Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Assuming drive cache: write through Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Very big device. Trying to use READ CAPACITY(16). Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] READ CAPACITY(16) failed Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK,SUGGEST_OK Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Use 0xffffffff as device size Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Sector size 0 reported, assuming 512. Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] 4294967296 512-byte hardware sectors (2199023 MB) Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Write Protect is off Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Mode Sense: 03 00 00 00 Feb 24 17:56:11 linbox kernel: sd 6:0:0:1: [sdd] Assuming drive cache: write through -------------------------------------------- Feb 24 17:56:14 linbox kernel: sdd: sdd3 Feb 24 17:56:14 linbox kernel: sdd: p3 exceeds device capacity -------------------------------------------- Feb 24 17:56:22 linbox kernel: attempt to access beyond end of device Feb 24 17:56:22 linbox kernel: sdd: rw=0, want=4295123010, limit=4294967296 Feb 24 17:56:22 linbox kernel: Buffer I/O error on device sdd3, logical block 196352 Feb 24 17:56:22 linbox kernel: attempt to access beyond end of device Feb 24 17:56:22 linbox kernel: sdd: rw=0, want=4295123011, limit=4294967296 -------------------------------------------- Additional (IMO caused by the above problems) the device has no parent: -------------------------------------------- Feb 24 17:57:05 linbox hald[4890]: 17:57:05.900 [I] blockdev.c:856: block_add: sysfs_path=/sys/block/sdd/sdd3 dev=/dev/sdd3 is_part=1, parent=0x00000000 Feb 24 17:57:05 linbox hald[4890]: 17:57:05.900 [I] blockdev.c:950: Ignoring hotplug event - no parent -------------------------------------------- I reassign it to the kernel developers. Maybe they can help you. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.