https://bugzilla.novell.com/show_bug.cgi?id=440928 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=440928#c17 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #17 from Robby Verberne <monkey9@iae.nl> 2008-11-21 12:48:53 MST --- ARM500-sfn7:/home/oddball # ifup wlan0 wlan0 device: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01) wlan0 warning: using NO encryption command 'iwconfig wlan0 nick ARM500-sfn7' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device wlan0 ; Operation not supported. Starting DHCP4 client on wlan0. . . . . . . . wlan0 DHCP4 continues in background ARM500-sfn7:/home/oddball # dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.5-3-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-11-13 09:33:41 +0100 PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3800 (reserved) BIOS-e820: 000000001fff3800 - 0000000020000000 (ACPI NVS) last_pfn = 0x1fff0 max_arch_pfn = 0x1000000 kernel direct mapping tables up to 1fff0000 @ 7000-d000 RAMDISK: 1fa43000 - 1ffdf196 DMI 2.3 present. ACPI: RSDP 000F9970, 0014 (r0 COMPAQ) ACPI: RSDT 1FFF476D, 002C (r1 COMPAQ RSDTBL 1 CPQ 1) ACPI: FACP 1FFF4828, 0074 (r1 COMPAQ CPQB151 20010721 CPQ 1) ACPI: DSDT 1FFF48A0, 6886 (r1 COMPAQ ARMADAE7 10000 MSFT 100000C) ACPI: FACS 1FFFFE80, 0040 ACPI: SSDT 1FFF4799, 008F (r1 COMPAQ CPQGysr 1001 MSFT 100000C) NUMA - single node, flat memory mode Node: 0, start_pfn: 0, end_pfn: 1fff0 Setting physnode_map array to node 0 for pfns: 0 4000 8000 c000 10000 14000 18000 1c000 node 0 pfn: [0 - 1fff0] Reserving 1536 pages of KVA for lmem_map of node 0 at 1f400 remove_active_range (0, 128000, 129536) Reserving total of 600 pages for numa KVA remap kva_start_pfn ~ 1ee00 max_low_pfn ~ 1fff0 max_pfn = 1fff0 0MB HIGHMEM available. 511MB LOWMEM available. max_low_pfn = 1fff0, highstart_pfn = 1fff0 Low memory ends at vaddr dfff0000 node 0 will remap to vaddr dee00000 - df400000 allocate_pgdat: node 0 NODE_DATA dee00000 remap_numa_kva: node 0 remap_numa_kva: dee00000 to pfn 0001f400 remap_numa_kva: df000000 to pfn 0001f600 remap_numa_kva: df200000 to pfn 0001f800 High memory starts at vaddr dfff0000 mapped low ram: 0 - 1fff0000 low ram: 00000000 - 1fff0000 bootmap 00002000 - 00006000 (11 early reservations) ==> bootmem [0000000000 - 001fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000067651c] TEXT DATA BSS ==> [0000100000 - 000067651c] #4 [001fa43000 - 001ffdf196] RAMDISK ==> [001fa43000 - 001ffdf196] #5 [0000677000 - 000067f000] INIT_PG_TABLE ==> [0000677000 - 000067f000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #7 [0000007000 - 000000c000] PGTABLE ==> [0000007000 - 000000c000] #8 [001f400000 - 001fa00000] KVA RAM ==> [001f400000 - 001fa00000] #9 [001ee00000 - 001f400000] KVA PG ==> [001ee00000 - 001f400000] #10 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001fff0 HighMem 0x0001fff0 -> 0x0001fff0 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0001f400 0: 0x0001fa00 -> 0x0001fff0 On node 0 totalpages: 129423 free_area_init_node: node 0, pgdat dee00000, node_mem_map dee02000 DMA zone: 3963 pages, LIFO batch:0 Normal zone: 124308 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x5008 SMP: Allowing 1 CPUs, 0 hotplug CPUs Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (01002000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000) PERCPU: Allocating 40092 bytes of per cpu data NR_CPUS: 128, nr_cpu_ids: 1, nr_node_ids 8 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128271 Policy zone: Normal Kernel command line: resume=/dev/disk/by-id/ata-IC25N020ATDA04-0_63A63LS6600-part5 splash=silent vga=0x317 bootsplash: silent mode. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PMTIMER calibration value Detected 896.093 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Initializing HighMem for node 0 (00000000:00000000) Memory: 499668k/524224k available (2427k kernel code, 24164k reserved, 1969k data, 328k init, 0k highmem) virtual kernel memory layout: fixmap : 0xff8b6000 - 0xfffff000 (7460 kB) pkmap : 0xff400000 - 0xff600000 (2048 kB) vmalloc : 0xe0800000 - 0xff3fe000 ( 491 MB) lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) .init : 0xc0552000 - 0xc05a4000 ( 328 kB) .data : 0xc035edab - 0xc054b1f8 (1969 kB) .text : 0xc0100000 - 0xc035edab (2427 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay loop (skipped), value calculated using timer frequency.. 1792.18 BogoMIPS (lpj=3584372) kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved Security Framework initialized SELinux: Disabled at boot. AppArmor: AppArmor initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed ACPI: Core revision 20080609 ACPI: Checking initramfs for custom DSDT Parsing all Control Methods: Table [DSDT](id 0001) - 614 Objects with 75 Devices 173 Methods 25 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 3 Objects with 0 Devices 1 Methods 0 Regions tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired ACPI: setting ELCR to 0200 (from 0800) evxfevnt-0091 [00] enable : Transition to ACPI mode successful weird, boot CPU (#0) not listedby the BIOS. SMP motherboard not detected. Mapping cpu 0 to node 0 Local APIC not detected. Using dummy APIC emulation. SMP disabled Mapping cpu 0 to node 0 Brought up 1 CPUs Total of 1 processors activated (1792.18 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0 level CPU groups: 0 net_namespace: 1044 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0478, last bus=1 PCI: Using configuration type 1 for base access perfmon: version 2.82 perfmon: CPU hotplug support enabled evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:................................................................ Initialized 18/25 Regions 0/0 Fields 18/19 Buffers 28/35 Packages (626 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:...... Executed 6 _INI methods requiring 2 _STA executions (examined 79 objects) evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 2 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [C005] (0000:00) PCI: 0000:00:00.0 reg 10 32bit mmio: [50000000, 53ffffff] PCI: 0000:00:04.0 reg 10 32bit mmio: [41100000, 41100fff] pci 0000:00:04.0: supports D1 pci 0000:00:04.0: supports D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:04.0: PME# disabled PCI: 0000:00:04.1 reg 10 32bit mmio: [41180000, 41180fff] pci 0000:00:04.1: supports D1 pci 0000:00:04.1: supports D2 pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot pci 0000:00:04.1: PME# disabled PCI: 0000:00:07.1 reg 20 io port: [3420, 342f] PCI: 0000:00:07.2 reg 20 io port: [3400, 341f] pci 0000:00:07.3: quirk: region 5000-503f claimed by PIIX4 ACPI pci 0000:00:07.3: quirk: region 4000-400f claimed by PIIX4 SMB pci 0000:00:07.3: PIIX4 devres C PIO at 0100-0107 pci 0000:00:07.3: PIIX4 devres I PIO at 00e0-00e3 pci 0000:00:07.3: PIIX4 devres J PIO at 00f8-00fb PCI: 0000:00:08.0 reg 10 io port: [3000, 30ff] pci 0000:00:08.0: supports D1 pci 0000:00:08.0: supports D2 pci 0000:00:08.0: PME# supported from D1 D2 D3hot pci 0000:00:08.0: PME# disabled PCI: 0000:00:09.0 reg 10 32bit mmio: [41280000, 41280fff] PCI: 0000:00:09.0 reg 14 io port: [3440, 347f] PCI: 0000:00:09.0 reg 18 32bit mmio: [41200000, 4121ffff] PCI: 0000:00:09.0 reg 30 32bit mmio: [0, fffff] pci 0000:00:09.0: supports D1 pci 0000:00:09.0: supports D2 pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.0: PME# disabled PCI: 0000:00:09.1 reg 10 io port: [3430, 3437] PCI: 0000:00:09.1 reg 14 32bit mmio: [41300000, 41300fff] pci 0000:00:09.1: supports D1 pci 0000:00:09.1: supports D2 pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.1: PME# disabled PCI: 0000:01:00.0 reg 10 32bit mmio: [40000000, 40ffffff] PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff] PCI: 0000:01:00.0 reg 18 32bit mmio: [41000000, 41000fff] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 PCI: bridge 0000:00:01.0 io port: [2000, 2fff] PCI: bridge 0000:00:01.0 32bit mmio: [40000000, 410fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C005._PRT] ACPI: PCI Interrupt Link [C142] (IRQs *11) ACPI: PCI Interrupt Link [C148] (IRQs 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs *11) ACPI: PCI Interrupt Link [C14A] (IRQs *11) ACPI: Power Resource [C129] (on) ACPI: Power Resource [C0DB] (on) ACPI: Power Resource [C15F] (off) ACPI: Power Resource [C161] (off) ACPI: Power Resource [C163] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0d: mem resource (0xd1800-0xd3fff) overlaps 0000:00:09.0 BAR 6 (0x0-0xfffff), disabling pnp 00:0e: mem resource (0x0-0x9ffff) overlaps 0000:00:09.0 BAR 6 (0x0-0xfffff), disabling pnp 00:0e: mem resource (0xf0000-0xfffff) overlaps 0000:00:09.0 BAR 6 (0x0-0xfffff), disabling pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing AppArmor: AppArmor Filesystem Enabled ACPI: RTC can wake from S4 system 00:0c: ioport range 0x4d0-0x4d1 has been reserved system 00:0c: ioport range 0x800-0x87f has been reserved system 00:0c: ioport range 0x4000-0x400f has been reserved system 00:0c: ioport range 0x5000-0x5063 could not be reserved system 00:0c: ioport range 0x6004-0x6005 has been reserved system 00:0c: ioport range 0xf000-0xf0cf has been reserved system 00:0d: iomem range 0xfff80000-0xffffffff has been reserved system 00:0e: iomem range 0x100000-0x1fffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0x40000000-0x410fffff pci 0000:00:01.0: PREFETCH window: 0x00000041400000-0x000000414fffff pci 0000:00:04.0: CardBus bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: 0x001000-0x0010ff pci 0000:00:04.0: IO window: 0x001400-0x0014ff pci 0000:00:04.0: PREFETCH window: 0x30000000-0x33ffffff pci 0000:00:04.0: MEM window: 0x34000000-0x37ffffff pci 0000:00:04.1: CardBus bridge, secondary bus 0000:06 pci 0000:00:04.1: IO window: 0x001800-0x0018ff pci 0000:00:04.1: IO window: 0x001c00-0x001cff pci 0000:00:04.1: PREFETCH window: 0x38000000-0x3bffffff pci 0000:00:04.1: MEM window: 0x3c000000-0x3fffffff ACPI: PCI Interrupt Link [C142] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:00:04.0: PCI INT A -> Link[C142] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:04.1: PCI INT A -> Link[C142] -> GSI 11 (level, low) -> IRQ 11 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [2000, 2fff] bus: 01 index 1 mmio: [40000000, 410fffff] bus: 01 index 2 mmio: [41400000, 414fffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [1000, 10ff] bus: 02 index 1 io port: [1400, 14ff] bus: 02 index 2 mmio: [30000000, 33ffffff] bus: 02 index 3 mmio: [34000000, 37ffffff] bus: 06 index 0 io port: [1800, 18ff] bus: 06 index 1 io port: [1c00, 1cff] bus: 06 index 2 mmio: [38000000, 3bffffff] bus: 06 index 3 mmio: [3c000000, 3fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs...<7>Switched to high resolution mode on CPU 0 done Freeing initrd memory: 5744k freed Machine check exception polling timer started. audit: initializing netlink socket (disabled) type=2000 audit(1227298160.340:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 246 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) perfmon: added sampling format default pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:09.0: Firmware left e100 interrupts enabled; disabling pci 0000:01:00.0: Boot video device vesafb: framebuffer at 0x40000000, mapped to 0xe0880000, using 6144k, total 8128k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:5074 vesafb: pmi: set display start = c00c50cc, set palette = c00c5126 vesafb: pmi: ports = 2085 201f 20b4 20b8 2018 2014 20c0 20c3 20c1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 166113 bytes bootsplash: ...found (1024x768, 154167 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver8 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [C149] enabled at IRQ 11 serial 0000:00:09.1: PCI INT A -> Link[C149] -> GSI 11 (level, low) -> IRQ 11 PNP: PS/2 Controller [PNP0303:C0D8,PNP0f0e:C0D9] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.0. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 328k freed Write protecting the kernel text: 2428k Write protecting the kernel read-only data: 1788k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [C0B4] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [C15E] (36 C) Uniform Multi-Platform E-IDE driver piix 0000:00:07.1: IDE controller (0x8086:0x7111 rev 0x01) piix 0000:00:07.1: IDE port disabled piix 0000:00:07.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3420-0x3427 Probing IDE interface ide0... Marking TSC unstable due to TSC halts in idle Clocksource tsc unstable (delta = -141086951 ns) hda: IC25N020ATDA04-0, ATA DISK drive Synaptics Touchpad, model: 1, fw: 5.1, id: 0x1640b1, caps: 0x804713/0x0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1 hdb: Toshiba DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ACPI: ACPI Dock Station Driver: 1 docks/bays found SCSI subsystem initialized libata version 3.00 loaded. ACPI: Transitioning device [C15D] to D3 fan PNP0C0B:00: registered as cooling_device1 ACPI: Fan [C15D] (off) ACPI: Transitioning device [C160] to D3 fan PNP0C0B:01: registered as cooling_device2 ACPI: Fan [C160] (off) ACPI: Transitioning device [C162] to D3 fan PNP0C0B:02: registered as cooling_device3 ACPI: Fan [C162] (off) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found udevd version 128 started hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63 hda: cache flushes not supported hda:<6>: usbcore: registered new interface driver usbfs hda1 hda2 <<6>: usbcore: registered new interface driver hub hda5<6>: usbcore: registered new device driver usb hda6<6>USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [C14A] enabled at IRQ 11 uhci_hcd 0000:00:07.2: PCI INT D -> Link[C14A] -> GSI 11 (level, low) -> IRQ 11 hda7 > uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x00003400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.5-3-pae uhci_hcd usb usb1: SerialNumber: 0000:00:07.2 PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. JBD: barrier-based sync failed on hda6 - disabling barriers udevd version 128 started input: PC Speaker as /devices/platform/pcspkr/input/input2 Linux agpgart interface v0.103 parport_pc 00:04: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] JBD: barrier-based sync failed on hda6 - disabling barriers pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button (FF) [PWRF] ACPI: Battery Slot [C0FE] (battery present) agpgart-intel 0000:00:00.0: Intel 440BX Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x50000000 ACPI: Battery Slot [C0FF] (battery absent) ACPI: Battery Slot [C100] (battery absent) input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 hdb: ATAPI 24X DVD-ROM drive, 192kB Cache Uniform CD-ROM driver Revision: 3.20 ACPI: Sleep Button (CM) [C057] ACPI: AC Adapter [C0F6] (on-line) request region #1 isp1760: probe of 0000:00:07.3 failed with error -16 input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 ACPI: Lid Switch [C16B] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:00:09.0: PCI INT A -> Link[C149] -> GSI 11 (level, low) -> IRQ 11 e100 0000:00:09.0: PME# disabled rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 : rtc0: alarms up to one month, y3k e100: eth0: e100_probe: addr 0x41280000, irq 11, MAC addr 00:d0:59:9c:4a:12 Yenta: CardBus bridge found at 0000:00:04.0 [0e11:b121] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.0, mfunc 0x01001c72, devctl 0x64 NET: Registered protocol family 23 found SMC SuperIO Chip (devid=0x0a rev=00 base=0x00e0): FDC37N971 smsc_ircc_present: can't get sir_base of 0x3e8 Yenta: ISA IRQ mask 0x0438, PCI irq 11 Socket status: 30000020 Yenta: CardBus bridge found at 0000:00:04.1 [0e11:b121] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.1, mfunc 0x01001c72, devctl 0x64 ppdev: user-space parallel port driver Yenta TI: socket 0000:00:04.1 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:00:04.1 parallel PCI interrupts ok Yenta: ISA IRQ mask 0x0438, PCI irq 11 Socket status: 30000006 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x4000, revision 0 ES1968 (ESS Maestro) 0000:00:08.0: PCI INT A -> Link[C149] -> GSI 11 (level, low) -> IRQ 11 pccard: CardBus card inserted into slot 0 PCI: 0000:02:00.0 reg 10 32bit mmio: [0, ffff] es1968: clocking to 48000 Linux video capture interface: v2.00 ath5k_pci 0000:02:00.0: enabling device (0000 -> 0002) ath5k_pci 0000:02:00.0: PCI INT A -> Link[C142] -> GSI 11 (level, low) -> IRQ 11 ath5k_pci 0000:02:00.0: registered as 'phy0' phy0: Selected rate control algorithm 'pid' cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0xa00-0xaff: clean. ath5k phy0: Atheros AR5213 chip found (MAC: 0x56, PHY: 0x41) ath5k phy0: RF5111 5GHz radio found (0x17) ath5k phy0: RF2111 2GHz radio found (0x23) cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. Adding 778608k swap on /dev/hda5. Priority:-1 extents:1 across:778608k device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.9) type=1505 audit(1227294592.406:2): operation="profile_load" name="/bin/ping" name2="default" pid=1651 type=1505 audit(1227294592.938:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1713 type=1505 audit(1227294593.694:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1742 type=1505 audit(1227294594.570:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1743 type=1505 audit(1227294595.322:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1745 type=1505 audit(1227294596.030:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1746 type=1505 audit(1227294596.710:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1747 type=1505 audit(1227294597.622:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1748 type=1505 audit(1227294599.198:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1749 type=1505 audit(1227294599.890:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1750 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team powernow: This module only works with AMD K7 CPUs ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (8192 buckets, 32768 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready NET: Registered protocol family 17 JBD: barrier-based sync failed on hda7 - disabling barriers e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=263 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=243 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=492 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=472 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=62 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=42 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=492 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=472 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=492 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=472 eth0: no IPv6 routers present SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=62 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=42 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=62 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=42 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=62 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=42 e100: eth0: e100_watchdog: link down e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=62 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=42 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=263 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=243 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=492 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=472 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=492 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=472 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=492 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=472 ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP ff:ff:ff:ff:ff:ff wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authentication with AP 00:1e:e5:70:49:b8 timed out eth0: no IPv6 routers present e100: eth0: e100_watchdog: link down ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready ADDRCONF(NETDEV_UP): eth0: link is not ready wlan0: authenticate with AP 00:1e:e5:70:49:b8 ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authentication with AP 00:1e:e5:70:49:b8 timed out e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present e100: eth0: e100_watchdog: link down ADDRCONF(NETDEV_UP): eth0: link is not ready wlan0: authenticate with AP 00:1e:e5:70:49:b8 ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authenticate with AP 00:1e:e5:70:49:b8 wlan0: authentication with AP 00:1e:e5:70:49:b8 timed out ARM500-sfn7:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.