http://bugzilla.opensuse.org/show_bug.cgi?id=921570 --- Comment #4 from Steffen Hau <steffen.hau@rz.uni-mannheim.de> --- These messages do net seem to be the cause. When I disable the multipathd systemd unit and start it manually after a reboot, the messages are also shown: Mär 10 17:16:34 testhost kernel: device-mapper: multipath: version 1.7.0 loaded Mär 10 17:16:34 testhost kernel: device-mapper: multipath service-time: version 0.2.0 loaded Mär 10 17:16:34 testhost kernel: device-mapper: table: 253:0: multipath: error getting device Mär 10 17:16:34 testhost kernel: device-mapper: ioctl: error adding target to table Mär 10 17:16:34 testhost kernel: device-mapper: table: 253:0: multipath: error getting device Mär 10 17:16:34 testhost kernel: device-mapper: ioctl: error adding target to table But the devices are avalable: testhost:~ # multipath -ll 360050768018085377800000000000084 dm-0 IBM,2145 size=1000G features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='service-time 0' prio=50 status=active | |- 1:0:6:0 sdd 8:48 active ready running | `- 2:0:6:0 sdf 8:80 active ready running `-+- policy='service-time 0' prio=10 status=enabled |- 1:0:1:0 sdc 8:32 active ready running `- 2:0:0:0 sde 8:64 active ready running testhost:~ # dmsetup ls --tree 360050768018085377800000000000084-part1 (253:1) └─360050768018085377800000000000084 (253:0) ├─ (8:64) ├─ (8:32) ├─ (8:80) └─ (8:48) I can see the device-mapper lines an all systems (also 13.1), were multipathd is enabled, so they look harmless to me. -- You are receiving this mail because: You are on the CC list for the bug.