https://bugzilla.novell.com/show_bug.cgi?id=419858 Summary: Bluetooth authorization broken with Palm PDA Product: openSUSE 11.0 Version: Final Platform: i686 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Mobile Devices AssignedTo: zoz@novell.com ReportedBy: krupp@upb.de QAContact: qa@suse.de Found By: Community User Authorization does not complete between a Palm Tungsten T5 and the BlueZ stack of a fresh 11.0 installation. The PC is equipped with an AVM BT dongle with bfusb module: lsusb: Bus 001 Device 002: ID 057c:2200 AVM GmbH BlueFRITZ! Output of dbus-monitor --system --profile: --- sig 1219524964 318651 2 /org/freedesktop/DBus org.freedesktop. DBus NameAcquired sig 1219524968 262036 7 /org/freedesktop/DBus org.freedesktop.DBus NameOwnerChanged sig 1219524985 521419 54 /org/bluez/hci0 org.bluez.Adapter RemoteDeviceConnected sig 1219524985 572866 296 /org/freedesktop/Hal/Manager org.freedesktop.Hal.Manager DeviceAdded sig 1219525042 929080 56 /org/bluez/hci0 org.bluez.Adapter RemoteDeviceDisconnected sig 1219525042 933817 297 /org/freedesktop/Hal/Manager org.freedesktop.Hal.Manager DeviceRemoved sig 1219525061 99944 298 /org/freedesktop/Hal/Manager org.freedesktop.Hal.Manager DeviceAdded sig 1219525081 89416 299 /org/freedesktop/Hal/Manager org.freedesktop.Hal.Manager DeviceRemoved --- Output of hcidump -t: --- HCI sniffer - Bluetooth packet analyzer ver 1.41 device: hci0 snap_len: 1028 filter: 0xffffffff 1219524985.440586 > HCI Event: Connect Request (0x04) plen 10 1219524985.440700 < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 1219524985.519579 > HCI Event: Connect Complete (0x03) plen 11 1219524985.519652 < ACL data: handle 19 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 1219524985.522574 > HCI Event: Max Slots Change (0x1b) plen 3 1219524985.526569 > HCI Event: Number of Completed Packets (0x13) plen 5 1219524985.647555 > ACL data: handle 19 flags 0x02 dlen 12 L2CAP(s): Info rsp: type 2 result 1 Not supported 1219524992.726673 > HCI Event: PIN Code Request (0x16) plen 6 1219524992.731607 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 1219524992.732669 > HCI Event: Command Status (0x0f) plen 4 1219524992.732721 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 1219524992.733663 > HCI Event: Command Complete (0x0e) plen 6 1219524992.733708 < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4 1219524992.735657 > HCI Event: Connection Packet Type Changed (0x1d) plen 5 1219525060.976078 > HCI Event: Connect Request (0x04) plen 10 1219525060.976186 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 1219525060.979079 > HCI Event: Command Status (0x0f) plen 4 1219525060.979137 < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23 1219525081.071544 > HCI Event: Connect Complete (0x03) plen 11 --- At approximately time 1219525042 the Palm displays, that it could not become autorized. Subsequently, after pressing "retry" on the Palm, the later message are being logged. Oddly, the PIN Code Request Reply from the PC seems to be sent only in the second session. This was also tested on a 10.2 installation with similar results. The 10.2 is running kbluetoothd, the 11.0 is a console only installation where passkey agent gives the following output during the first connect session: --- Confirm request for device 00:07:E0:xx:xx:xx --- -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.