https://bugzilla.novell.com/show_bug.cgi?id=378595
Summary: Xen network-bridge script does not work
Product: openSUSE 11.0
Version: Alpha 3plus
Platform: Other
OS/Version: Other
Status: NEW
Severity: Critical
Priority: P5 - None
Component: Xen
AssignedTo: jfehlig@novell.com
ReportedBy: jfehlig@novell.com
QAContact: jdouglas@novell.com
CC: lbendixs@novell.com, mt@novell.com
Found By: Development
With changes to sysconfig and networking scripts, the Xen network-bridge script
no longer works.
xen67:~ # brctl addbr tmpbr
xen67:~ # ip addr add 151.155.144.67/22 dev tmpbr label tmpbr
xen67:~ # ifdown eth0
eth0 device: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller
(Copper) (rev 01)
xen67:~ # ip link set eth0 name peth0
xen67:~ # ip link set tmpbr name eth0
xen67:~ # ip link set peth0 up
xen67:~ # brctl addif eth0 peth0
xen67:~ # brctl show
bridge name bridge id STP enabled interfaces
eth0 8000.003048347d8a no peth0
xen67:~ # ifup eth0
eth0
eth0 Warning: Bridge eth0 already up!
xen67:~ # ifstatus eth0
eth0
eth0 is down
xen67:~ # ip a
1: lo: mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: peth0: mtu 1500 qdisc pfifo_fast
qlen 1000
link/ether 00:30:48:34:7d:8a brd ff:ff:ff:ff:ff:ff
inet6 fe80::230:48ff:fe34:7d8a/64 scope link
valid_lft forever preferred_lft forever
3: eth1: mtu 1500 qdisc noop qlen 1000
link/ether 00:30:48:34:7d:8b brd ff:ff:ff:ff:ff:ff
11: eth0: mtu 1500 qdisc noop
link/ether 00:30:48:34:7d:8a brd ff:ff:ff:ff:ff:ff
inet 151.155.144.67/22 scope global eth0
xen67:~ # ip r
127.0.0.0/8 dev lo scope link
xen67:~ # ip link set eth0 up
xen67:~ # ip a
1: lo: mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: peth0: mtu 1500 qdisc pfifo_fast
qlen 1000
link/ether 00:30:48:34:7d:8a brd ff:ff:ff:ff:ff:ff
inet6 fe80::230:48ff:fe34:7d8a/64 scope link
valid_lft forever preferred_lft forever
3: eth1: mtu 1500 qdisc noop qlen 1000
link/ether 00:30:48:34:7d:8b brd ff:ff:ff:ff:ff:ff
11: eth0: mtu 1500 qdisc noqueue
link/ether 00:30:48:34:7d:8a brd ff:ff:ff:ff:ff:ff
inet 151.155.144.67/22 scope global eth0
inet6 fe80::230:48ff:fe34:7d8a/64 scope link
valid_lft forever preferred_lft forever
xen67:~ # ip r
151.155.144.0/22 dev eth0 proto kernel scope link src 151.155.144.67
127.0.0.0/8 dev lo scope link
So it can be made to work (with static configuration) but default route is not
configured. I have not tried on a dhcp configured interface.
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
