https://bugzilla.novell.com/show_bug.cgi?id=373357 User infoman@imail.de added comment https://bugzilla.novell.com/show_bug.cgi?id=373357#c10 --- Comment #10 from Ingo Schulz <infoman@imail.de> 2008-08-03 08:41:13 MDT --- So, i executed the suggested tasks. Here are my logs: 1. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M24 1P [Radeon Mobility X600] [1002:3150] 02:01.0 CardBus bridge [0607]: Texas Instruments PCI7420 CardBus Controller [104c:ac8e] 02:01.2 FireWire (IEEE 1394) [0c00]: Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller [104c:802e] 02:01.3 Mass storage controller [0180]: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller [104c:ac8f] 02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG Network Connection [8086:4220] (rev 05) 02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) 2. hdparm -I /dev/sda /dev/sda: ATA device, with non-removable media Model Number: HTS541080G9SA00 Serial Number: MPBDL0X6JM9ZYM Firmware Revision: MB4OC60D Standards: Used: ATA/ATAPI-7 T13 1532D revision 1 Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 156301488 LBA48 user addressable sectors: 156301488 device size with M = 1024*1024: 76319 MBytes device size with M = 1000*1000: 80026 MBytes (80 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Vendor, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 128 Recommended acoustic management value: 128, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension * Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * WRITE_{DMA|MULTIPLE}_FUA_EXT * SATA-I signaling speed (1.5Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management Non-Zero buffer offsets in DMA Setup FIS DMA Setup Auto-Activate optimization * Device-initiated interface power management In-order data delivery * Software settings preservation Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count not supported: enhanced erase 52min for SECURITY ERASE UNIT. Checksum: correct 3. /var/log/boot.msg Inspecting /boot/System.map-2.6.25.5-1.1-default Loaded 28387 symbols from /boot/System.map-2.6.25.5-1.1-default. Symbols match kernel version 2.6.25. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <5>Linux version 2.6.25.5-1.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-06-07 01:55:22 +0200 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) <4> BIOS-e820: 000000003ffc0000 - 000000003ffcf000 (ACPI data) <4> BIOS-e820: 000000003ffcf000 - 0000000040000000 (ACPI NVS) <4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) <4> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) <4> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) <4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) <5>127MB HIGHMEM available. <5>896MB LOWMEM available. <6>Scan SMP from c0000000 for 1024 bytes. <6>Scan SMP from c009fc00 for 1024 bytes. <6>Scan SMP from c00f0000 for 65536 bytes. <6>found SMP MP-table at [c00ff780] 000ff780 <7>Entering add_active_range(0, 0, 262080) 0 entries of 256 used <4>Zone PFN ranges: <4> DMA 0 -> 4096 <4> Normal 4096 -> 229376 <4> HighMem 229376 -> 262080 <4>Movable zone start PFN for each node <4>early_node_map[1] active PFN ranges <4> 0: 0 -> 262080 <7>On node 0 totalpages: 262080 <7> DMA zone: 32 pages used for memmap <7> DMA zone: 0 pages reserved <7> DMA zone: 4064 pages, LIFO batch:0 <7> Normal zone: 1760 pages used for memmap <7> Normal zone: 223520 pages, LIFO batch:31 <7> HighMem zone: 255 pages used for memmap <7> HighMem zone: 32449 pages, LIFO batch:7 <7> Movable zone: 0 pages used for memmap <6>DMI 2.3 present. <6>Using APIC driver default <4>ACPI: RSDP 000F6910, 0014 (r0 SONY ) <4>ACPI: RSDT 3FFC0000, 0038 (r1 SONY F2 20051222 MSFT 97) <4>ACPI: FACP 3FFC0200, 0084 (r2 SONY F2 20051222 MSFT 97) <4>ACPI: DSDT 3FFC0470, 54A7 (r1 SONY F2 20051222 INTL 2002026) <4>ACPI: FACS 3FFCF000, 0040 <4>ACPI: APIC 3FFC0390, 0054 (r1 SONY F2 20051222 MSFT 97) <4>ACPI: MCFG 3FFC03F0, 003C (r1 SONY F2 20051222 MSFT 97) <4>ACPI: OEMB 3FFCF040, 0040 (r1 SONY F2 20051222 MSFT 97) <4>ACPI: SSDT 3FFC5920, 02B7 (r1 SONY F2 20051222 INTL 2002026) <5>ACPI: DMI detected: Sony <6>ACPI: PM-Timer IO Port: 0x808 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <4>Processor #0 6:13 APIC version 20 <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) <4>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <6>Using ACPI (MADT) for SMP configuration information <4>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) <6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 <6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 <6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260033 <5>Kernel command line: BOOT_IMAGE=linux initrd=initrd,10240768.spl ramdisk_size=512000 ramdisk_blocksize=4096 splash=silent vga=0x317 <6>bootsplash: silent mode. <7>mapped APIC to ffffb000 (fee00000) <7>mapped IOAPIC to ffffa000 (fec00000) <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 16384 bytes) <4>Detected 1729.066 MHz processor. <4>Console: colour dummy device 80x25 <6>console [tty0] enabled <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 1021508k/1048320k available (1945k kernel code, 26204k reserved, 1629k data, 256k init, 130816k highmem) <6>virtual kernel memory layout: <4> fixmap : 0xffdf2000 - 0xfffff000 (2100 kB) <4> pkmap : 0xff400000 - 0xff800000 (4096 kB) <4> vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) <4> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) <4> .init : 0xc0485000 - 0xc04c5000 ( 256 kB) <4> .data : 0xc02e64dd - 0xc047d96c (1629 kB) <4> .text : 0xc0100000 - 0xc02e64dd (1945 kB) <6>Checking if this processor honours the WP bit even in supervisor mode...Ok. <7>CPA: page pool initialized 1 of 1 pages preallocated <4>Calibrating delay using timer specific routine.. 3461.46 BogoMIPS (lpj=6922928) <6>Security Framework initialized <6>AppArmor: AppArmor initialized <NULL> <6>AppArmor: Registered secondary security module capability <6>Capability LSM initialized as secondary <4>Mount-cache hash table entries: 512 <6>CPU: L1 I cache: 32K, L1 D cache: 32K <6>CPU: L2 cache: 2048K <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <4>Compat vDSO mapped to ffffe000. <6>Checking 'hlt' instruction... OK. <6>SMP alternatives: switching to UP code <6>Freeing SMP alternatives: 18k freed <6>ACPI: Core revision 20070126 <6>ACPI: Checking initramfs for custom DSDT <4>Parsing all Control Methods: <4>Table [DSDT](id 0001) - 872 Objects with 60 Devices 208 Methods 28 Regions <4>Parsing all Control Methods: <4>Table [SSDT](id 0002) - 8 Objects with 0 Devices 3 Methods 0 Regions <4> tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired <4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful <4>CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 <6>Total of 1 processors activated (3461.46 BogoMIPS). <4>ENABLING IO-APIC IRQs <6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>Brought up 1 CPUs <7>CPU0 attaching sched-domain: <7> domain 0: span 00000001 <7> groups: 00000001 <6>net_namespace: 548 bytes <6>Booting paravirtualized kernel on bare hardware <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: Using MMCONFIG for extended config space <6>PCI: Using configuration type 1 <6>Setting up standard PCI resources <4>evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 <4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block <7>ACPI: EC: Look up EC in DSDT <4>Completing Region/Field/Buffer/Package initialization:..................................................................................................................... <4>Initialized 27/28 Regions 23/23 Fields 44/45 Buffers 23/26 Packages (889 nodes) <4>Initializing Device/Processor/Thermal objects by executing _INI methods:.. <4>Executed 2 _INI methods requiring 1 _STA executions (examined 64 objects) <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S3 S4 S5) <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: EC: non-query interrupt received, switching to interrupt mode <6>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 <6>ACPI: EC: driver started in interrupt mode <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 <6>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO <6>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO <6>PCI: Transparent bridge - 0000:00:1e.0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] <6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11) <6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7) <6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7) <6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7) <6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7) <6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7) <6>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7) <4>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 9B, should be 93 [20070126] <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>ACPI: bus type pnp registered <6>pnp: PnP ACPI: found 15 devices <6>ACPI: ACPI bus type pnp unregistered <6>PnPBIOS: Disabled by ACPI PNP <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <7>hpet clockevent registered <6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 <6>hpet0: 3 64-bit timers, 14318180 Hz <6>AppArmor: AppArmor Filesystem Enabled <4>ACPI: RTC can wake from S4 <6>system 00:07: ioport range 0x4d0-0x4d1 has been reserved <6>system 00:07: ioport range 0x800-0x87f has been reserved <6>system 00:07: ioport range 0x480-0x4bf has been reserved <6>system 00:07: ioport range 0xfe00-0xfe01 has been reserved <6>system 00:07: iomem range 0xfed1c000-0xfed1ffff could not be reserved <6>system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved <6>system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved <6>system 00:08: iomem range 0xfec00000-0xfecfffff has been reserved <6>system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved <6>system 00:0b: iomem range 0xff780000-0xffbfffff could not be reserved <6>system 00:0b: iomem range 0xffb80000-0xffffffff could not be reserved <6>system 00:0c: iomem range 0xffc00000-0xffb7ffff could not be reserved <6>system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved <6>system 00:0e: iomem range 0x0-0x9ffff could not be reserved <6>system 00:0e: iomem range 0xc0000-0xdffff could not be reserved <6>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved <6>system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved <6>system 00:0e: iomem range 0x0-0x0 could not be reserved <6>PCI: Bridge: 0000:00:01.0 <6> IO window: 9000-bfff <6> MEM window: 0xfe900000-0xfe9fffff <6> PREFETCH window: 0x00000000cff00000-0x00000000dfefffff <4>PCI: Bus 3, cardbus bridge: 0000:02:01.0 <6> IO window: 0x0000c000-0x0000c0ff <6> IO window: 0x0000c400-0x0000c4ff <6> PREFETCH window: 0x50000000-0x53ffffff <6> MEM window: 0x58000000-0x5bffffff <6>PCI: Bridge: 0000:00:1e.0 <6> IO window: c000-cfff <6> MEM window: 0xfea00000-0xfeafffff <6> PREFETCH window: 0x0000000050000000-0x0000000055ffffff <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 <7>PCI: Setting latency timer of device 0000:00:01.0 to 64 <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64 <6>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21 <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>Unpacking initramfs...<7>Switched to high resolution mode on CPU 0 <4> done <6>Freeing initrd memory: 12771k freed <6>Machine check exception polling timer started. <6>audit: initializing netlink socket (disabled) <5>type=2000 audit(1217765339.204:1): initialized <4>highmem bounce pool size: 64 pages <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <7>pci 0000:01:00.0: Boot video device <7>PCI: Setting latency timer of device 0000:00:01.0 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:01.0:pcie00] <7>Allocate Port Service[0000:00:01.0:pcie03] <6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 131008k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=84 <6>vesafb: protected mode interface info at c000:59c3 <6>vesafb: pmi: set display start = c00c5a31, set palette = c00c5a6b <6>vesafb: pmi: ports = b010 b016 b054 b038 b03c b05c b000 b004 b0b0 b0b2 b0b4 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture... <6>bootsplash: silentjpeg size 166113 bytes <6>bootsplash: ...found (1024x768, 154167 bytes, v3). <4>Console: switching to colour frame buffer device 124x44 <6>fb0: VESA VGA frame buffer device <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <4>floppy0: no floppy controllers found <6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker as /devices/platform/pcspkr/input/input0 <6>cpuidle: using governor ladder <6>cpuidle: using governor menu <6>NET: Registered protocol family 1 <4>Using IPI No-Shortcut mode <4>registered taskstats version 1 <6>Freeing unused kernel memory: 256k freed <6>Write protecting the kernel read-only data: 1440k <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 <6>input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input2 <6>input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input3 <6>No dock devices found. <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <7>ahci 0000:00:1f.2: version 3.0 <6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 <6>ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl IDE mode <6>ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part <7>PCI: Setting latency timer of device 0000:00:1f.2 to 64 <6>scsi0 : ahci <6>scsi1 : ahci <6>scsi2 : ahci <6>scsi3 : ahci <6>ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 17 <6>ata2: DUMMY <6>ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 17 <6>ata4: DUMMY <6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata1.00: ATA-7: HTS541080G9SA00, MB4OC60D, max UDMA/100 <6>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (not used) <6>ata1.00: configured for UDMA/100 <6>ata3: SATA link down (SStatus 0 SControl 300) <5>scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4O PQ: 0 ANSI: 5 <7>ata_piix 0000:00:1f.1: version 2.12 <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 <7>PCI: Setting latency timer of device 0000:00:1f.1 to 64 <6>scsi4 : ata_piix <6>scsi5 : ata_piix <6>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 <6>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 <6>ata5.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.11, max UDMA/33 <6>ata5.00: configured for UDMA/33 <5>scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.11 PQ: 0 ANSI: 5 <6>Uniform Multi-Platform E-IDE driver <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>Driver 'sr' needs updating - please use bus_type methods <4>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 4:0:0:0: Attached scsi CD-ROM sr0 <4>Driver 'sd' needs updating - please use bus_type methods <5>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sda: sda1 sda2 < sda5 sda6 sda7 > <5>sd 0:0:0:0: [sda] Attached SCSI disk <6>st: Version 20080221, fixed bufsize 32768, s/g segs 256 <4>Driver 'st' needs updating - please use bus_type methods <5>sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>sr 4:0:0:0: Attached scsi generic sg1 type 5 <6>brd: module loaded <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 <7>PCI: Setting latency timer of device 0000:00:1d.7 to 64 <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 <6>ehci_hcd 0000:00:1d.7: debug port 1 <7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7 <6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800 <6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 8 ports detected <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: EHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.25.5-1.1-default ehci_hcd <6>usb usb1: SerialNumber: 0000:00:1d.7 <6>USB Universal Host Controller Interface driver v3.0 <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64 <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: UHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd <6>usb usb2: SerialNumber: 0000:00:1d.0 <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64 <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 <6>uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000dc00 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: UHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd <6>usb usb3: SerialNumber: 0000:00:1d.1 <6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 20 (level, low) -> IRQ 20 <7>PCI: Setting latency timer of device 0000:00:1d.2 to 64 <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 <6>uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e000 <6>usb usb4: configuration #1 chosen from 1 choice <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 2 ports detected <6>usb 1-1: new high speed USB device using ehci_hcd and address 2 <6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb4: Product: UHCI Host Controller <6>usb usb4: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd <6>usb usb4: SerialNumber: 0000:00:1d.2 <6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 21 <7>PCI: Setting latency timer of device 0000:00:1d.3 to 64 <6>uhci_hcd 0000:00:1d.3: UHCI Host Controller <6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 <6>uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000e080 <6>usb usb5: configuration #1 chosen from 1 choice <6>hub 5-0:1.0: USB hub found <6>hub 5-0:1.0: 2 ports detected <6>usb 1-1: configuration #1 chosen from 1 choice <6>usb 1-1: New USB device found, idVendor=0bda, idProduct=8187 <6>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>usb 1-1: Product: RTL8187_Wireless_LAN_Adapter <6>usb 1-1: Manufacturer: Manufacturer_Realtek_RTL8187_ <6>usb 1-1: SerialNumber: 00C0CA1B3748 <6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb5: Product: UHCI Host Controller <6>usb usb5: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd <6>usb usb5: SerialNumber: 0000:00:1d.3 <6>Initializing USB Mass Storage driver... <3>hub 1-0:1.0: unable to enumerate USB device on port 2 <3>hub 1-0:1.0: unable to enumerate USB device on port 8 <6>usb 2-2: new low speed USB device using uhci_hcd and address 2 <6>usb 2-2: configuration #1 chosen from 1 choice <6>usb 2-2: New USB device found, idVendor=046d, idProduct=c50a <6>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 2-2: Product: USB Receiver <6>usb 2-2: Manufacturer: Logitech <6>usb 5-2: new full speed USB device using uhci_hcd and address 2 <6>usb 5-2: configuration #1 chosen from 1 choice <6>usb 5-2: New USB device found, idVendor=044e, idProduct=300c <6>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 5-2: Product: UGX <6>usb 5-2: Manufacturer: ALPS <6>usbcore: registered new interface driver usb-storage <6>USB Mass Storage support registered. <7>ISO 9660 Extensions: Microsoft Joliet Level 3 <7>ISO 9660 Extensions: RRIP_1991A <7>ISO 9660 Extensions: Microsoft Joliet Level 3 <7>ISO 9660 Extensions: RRIP_1991A <6>loop: module loaded <6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher <4>fuse init (API version 7.9) <6>aufs 20080428 <4>aufs test_add:376:mount[1080]: uid/gid/perm /read-only 0/0/0755, 0/0/01777 <6>Bluetooth: Core ver 2.11 <6>NET: Registered protocol family 31 <6>Bluetooth: HCI device and connection manager initialized <6>Bluetooth: HCI socket layer initialized <6>iTCO_vendor_support: vendor-support=0 <6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) <6>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860) <6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) <6>sony-laptop: Sony Programmable IO Control Driver v0.6. <6>sony-laptop: detected Type3 model <6>input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:09/SNY6001:00/input/input4 <6>input: Sony Vaio Jogdial as /devices/virtual/input/input5 <6>sony-laptop: device allocated minor is 60 <6>sony-laptop: Sony Notebook Control Driver v0.6. <6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 <6>Linux agpgart interface v0.103 <3>intel_rng: FWH not detected <6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 <6>ACPI: CPU0 (power states: C1[C1] C2[C2]) <6>ACPI: ACPI0007:00 is registered as cooling_device0 <6>ACPI: Processor [CPU1] (supports 8 throttling states) <6>ACPI: Power Button (CM) [PWRB] <6>ACPI: AC Adapter [ACAD] (on-line) <6>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7 <6>ACPI: Lid Switch [LID] <4>Marking TSC unstable due to: TSC halts in idle. <4>Clocksource tsc unstable (delta = -296113317 ns) <6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 <6>rtc0: alarms up to one month, y3k <6>ACPI: PCI Interrupt 0000:02:01.3[B] -> GSI 22 (level, low) -> IRQ 22 <5>asus-laptop: Asus Laptop Support version 0.42 <5>asus-laptop: F2 model detected <6>tifm_core: MMC/SD card detected in socket 0:0 <6>usbcore: registered new interface driver hiddev <6>ACPI: Battery Slot [BAT1] (battery present) <6>Bluetooth: Generic Bluetooth USB driver ver 0.1 <6>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input8 <6>ACPI: LNXTHERM:01 is registered as thermal_zone0 <6>ACPI: Thermal Zone [ATF0] (58 C) <6>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded <6>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 17 <6>eth0: RTL8169sb/8110sb at 0xf928e400, 00:01:4a:f9:7b:36, XID 10000000 IRQ 17 <6>input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2 <6>usbcore: registered new interface driver btusb <6>usbcore: registered new interface driver usbhid <6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver <6>Yenta: CardBus bridge found at 0000:02:01.0 [104d:818f] <6>Yenta: Enabling burst memory read transactions <6>Yenta: Using CSCINT to route CSC interrupts to PCI <6>Yenta: Routing CardBus interrupts to PCI <6>Yenta TI: socket 0000:02:01.0, mfunc 0x01001b22, devctl 0x64 <6>Yenta: ISA IRQ mask 0x0cb8, PCI irq 21 <6>Socket status: 30000006 <6>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 <7>ieee80211_crypt: registered algorithm 'NULL' <6>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff <6>cs: IO port probe 0xc000-0xcfff: clean. <6>pcmcia: parent PCI bridge Memory window: 0xfea00000 - 0xfeafffff <6>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x55ffffff <6>ACPI: PCI Interrupt 0000:02:01.2[C] -> GSI 23 (level, low) -> IRQ 23 <6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[feafe800-feafefff] Max Packet=[2048] IR/IT contexts=[4/8] <6>ieee80211: 802.11 data/management/control stack, git-1.1.13 <6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> <6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 <7>PCI: Setting latency timer of device 0000:00:1b.0 to 64 <7>phy0: Selected rate control algorithm 'pid' <6>Bluetooth: HCI USB driver ver 2.9 <6>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq <6>ipw2200: Copyright(c) 2003-2006 Intel Corporation <6>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18 <6>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301ecb3df] <6>phy0: hwaddr 00:c0:ca:1b:37:48, rtl8187 V1 + rtl8225z2 <6>usbcore: registered new interface driver rtl8187 <6>usbcore: registered new interface driver hci_usb <6>ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) <6>cs: IO port probe 0x100-0x3af: clean. <6>cs: IO port probe 0x3e0-0x4ff: clean. <6>cs: IO port probe 0x820-0x8ff: clean. <6>cs: IO port probe 0xc00-0xcf7: clean. <6>cs: IO port probe 0xa00-0xaff: clean. <6>Bluetooth: L2CAP ver 2.9 <6>Bluetooth: L2CAP socket layer initialized <6>Bluetooth: RFCOMM socket layer initialized <6>Bluetooth: RFCOMM TTY layer initialized <6>Bluetooth: RFCOMM ver 1.8 <6>device-mapper: uevent: version 1.0.3 <6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Sun Aug 3 12:09:03 2008 -----> Starting boot shell on tty2 -----> Boot-Logging enabled on /dev/tty3 -----> Kernel logging enabled on: /dev/tty4 -----> Including required kernel modules... -----> Probing module: ahci -----> Probing module: ata_piix -----> Probing module: ehci-hcd -----> Probing module: uhci-hcd -----> Waiting for CD/DVD device(s) to appear... -----> Mounting CD/DVD drive... -----> Mounting compressed unified tree... -----> Stopping boot shell -----> Stopping boot logging Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Aug 3 12:09:26 2008 done Starting udevd: done Loading required kernel modules doneActivating swap-devices in /etc/fstab... doneroot file system (/) is NOT being checked. mount: can't find / in /etc/fstab or /etc/mtab Setting up the hardware clockhwclock: With --noadjfile, you must specify either --utc or --localtime failed Activating device mapper... done Starting MD Raid unused Waiting for udev to settle... Scanning for LVM volume groups... Reading all physical volumes. This may take a while... No volume groups found No volume groups found Activating LVM volume groups... No volume groups found done Checking file systems... fsck 1.40.8 (13-Mar-2008) donedone Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) nothing was mounted doneFuse filesystem already availabledone Mounting fuse control filesystemdone done Mounting securityfs on /sys/kernel/security done Loading AppArmor profiles <notice>killproc: kill(1178,29) Creating /var/log/boot.msg doneActivating remaining swap-devices in /etc/fstab... donedone Setting up linker cache (/etc/ld.so.cache) using ldconfigdone Turning quota on Checking quotas. This may take some time. done Setting up hostname 'linux'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 IP address: 127.0.0.2/8 done Configuring serial ports... Configured serial ports doneSetting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 fs.inotify.max_user_watches = 65536 net.ipv4.conf.default.promote_secondaries = 1 net.ipv4.conf.all.promote_secondaries = 1 done Enabling syn flood protectiondone Disabling IP forwardingdone done System Boot Control: The system has been set up Skipped features: boot.md System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(1178,3) Boot logging started on /dev/tty1(/dev/console) at Sun Aug 3 12:10:08 2008 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Starting D-Bus daemondone Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/sbin/resmgrd ] done <notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console IFS= TERM=linux SHELL=/bin/sh LC_ALL=POSIX ELOG_CONSOLE=/dev/tty3 INIT_VERSION=sysvinit-2.86 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors REDIRECT=/dev/tty1 systemIntegrity=clean COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N LINES=44 FSTYPE=squashfs PARTITIONER=sfdisk IFS_ORIG= SHLVL=2 HOME=/ ramdisk_blocksize=4096 BOOT_IMAGE=linux IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 SPLASH=yes KLOG_CONSOLE=4 splash=silent ramdisk_size=512000 LIVECD=livecd LIVECD_CONFIG=/cdrom/config.isoclient ARCH=i686 DEBUG=0 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console IFS= TERM=linux SHELL=/bin/sh LC_ALL=POSIX ELOG_CONSOLE=/dev/tty3 INIT_VERSION=sysvinit-2.86 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors REDIRECT=/dev/tty1 systemIntegrity=clean COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N LINES=44 FSTYPE=squashfs PARTITIONER=sfdisk IFS_ORIG= SHLVL=2 HOME=/ ramdisk_blocksize=4096 BOOT_IMAGE=linux IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 SPLASH=yes KLOG_CONSOLE=4 splash=silent ramdisk_size=512000 LIVECD=livecd LIVECD_CONFIG=/cdrom/config.isoclient ARCH=i686 DEBUG=0 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog servicesdone <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG= _=/sbin/startproc DAEMON=/sbin/acpid ] Starting acpid done Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ] done Loading CPUFreq modulesdone Starting HAL daemonCreating X Config<notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=no _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ] <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/sbin/portmap ] <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/sbin/auditd ] <notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ] <notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ] <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console IFS= SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44 PARTITIONER=sfdisk IFS_ORIG= HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096 IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686 LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] done done Starting the NetworkManagerdone Starting RPC portmap daemondone Loading keymap i386/qwerty/us.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Start Unicode mode doneStarting auditd done Starting Avahi daemon.done Starting Avahi DNS Configuration daemondone Starting cupsddone Starting java.binfmt_misc done Checking/updating CPU microcode done Starting Name Service Cache Daemondone Starting mail service (Postfix)done Starting powersaved: done Initializing random number generatordone Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console IFS= TERM=linux SHELL=/bin/sh ELOG_CONSOLE=/dev/tty3 INIT_VERSION=sysvinit-2.86 initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 systemIntegrity=clean COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ ELOG_FILE=/var/log/boot.kiwi LANG=en_US.UTF-8 LOCAL_BOOT=no UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N LINES=44 FSTYPE=squashfs PARTITIONER=sfdisk IFS_ORIG= QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ ramdisk_blocksize=4096 BOOT_IMAGE=linux IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 XCURSOR_THEME=DMZ WINDOWMANAGER= SPLASH=yes KLOG_CONSOLE=4 splash=silent ramdisk_size=512000 LIVECD=livecd LIVECD_CONFIG=/cdrom/config.isoclient ARCH=i686 DEBUG=0 _=/sbin/startproc DAEMON=/usr/bin/kdm ] done Starting service kdmdone done Master Resource Control: runlevel 5 has been reached <notice>killproc: kill(2464,3) 4. I have formated a Partition and no Error occured! I think in the live system, there is something different to the main dvd -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.