http://bugzilla.opensuse.org/show_bug.cgi?id=1120637 Bug ID: 1120637 Summary: No controls for REMOTE_IPADDR= field in YaST2 VLAN settings Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers@suse.de Reporter: mikhail.kasimov@gmail.com QA Contact: jsrain@suse.com Found By: --- Blocker: --- Hello! 've a test VLAN0, created via YaST2 standard wizard interface. Result config: ===== k_mikhail@linux-mk500:~> cat /etc/sysconfig/network/ifcfg-vlan0 BOOTPROTO='static' BROADCAST='' ETHERDEVICE='eth0' ETHTOOL_OPTIONS='' IPADDR='192.168.70.222/24' MTU='' NAME='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' VLAN_ID='0' ====== The question is about REMOTE_IPADDR='' field: it is present in final config, but cannot be defined in YaST2 GUI. Steps-to-reproduce: 1. Open YaST2 via X11 or terminal. 2. Add a VLAN interface via YaST2. 3. Check 'cat /etc/sysconfig/network/ifcfg-vlan0' output after 2. is finished. Possible solution: 1. Have specific filed in YaST2 GUI for that to have possibility to add such address. 2. Keep REMOTE_IPADDR='' as is in case of leaving this field empty in YaST2 settings. -- You are receiving this mail because: You are on the CC list for the bug.