https://bugzilla.novell.com/show_bug.cgi?id=467597 User tiwai@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=467597#c19 Takashi Iwai <tiwai@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |fenriswoolf@gmx.net --- Comment #19 from Takashi Iwai <tiwai@novell.com> 2009-01-22 07:47:24 MST --- OK, some facts: - You can use one of both mics at one; they are exclusive. - You need to select the internal mic or external mic explicitly via mixer app before using it. - The recorded signal isn't automatically routed to the output. You need to record, then play it back. (There is "Analog Loopback" switch, but you shouldn't use it unless you know what you are doing.) - There are some volume controls for recording level in addition. - For selecting the internal mic as the recording source, choose "Digital Mic 1" in "Digital Input Source" mixer element. In command line, run like amixer set "Digital Input Source" "Digital Mic 1" - For selecting the external mic, choose "Analog Inputs" in "Digital Input Source" mixer element. In command line, amixer set "Digital Input Source" "Analog Inputs" - The recording level can be adjusted via "Capture" volume. At least, it should work for the external mic. Since the internal mic is a digital mic, this might not work (I'm not sure). - "Mux" capture volume (might) influence on the recording level. This basically corresponds to the mic boost level, up to 40dB. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.