https://bugzilla.novell.com/show_bug.cgi?id=630434 https://bugzilla.novell.com/show_bug.cgi?id=630434#c10 Dennis Olsson <DOlsson@WEB.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED InfoProvider|DOlsson@WEB.de | --- Comment #10 from Dennis Olsson <DOlsson@WEB.de> 2010-09-15 16:44:17 CEST --- Although I currently cannot test on SLES 11 SP1 (my XEN guest first needs to be upgraded, which I currently cannot do), I have tried to test on the running SLES 11 GM with all updates using the PTFs Stefan Bogner supplied me with: kpartx-0.4.8-40.19.1.1889.0.PTF.638468.x86_64.rpm multipath-tools-0.4.8-40.19.1.1889.0.PTF.638468.x86_64.rpm sysconfig-0.71.14-12.9.1.1889.0.PTF.638468.x86_64.rpm mkinitrd-2.4-49.10.1 Having installed these, rerun "mkinitrd" and rebooted, the system still refuses to boot, while the iSCSI devices are not attached to the system. Which does not surprises me, while the problem is that the "mkinitrd" still cannot figure out that it has to activate iSCSI during the booting up of "initrd". Also tried to update to (from SLES 11 SP1): module-init-tools-3.11.1-1.3.5.x86_64.rpm mkinitrd-2.4.1-0.11.1.x86_64.rpm but this did not change anything (yes, I did rerun "mkinitrd")! As a note, after having finished the "initrd" booting, it finishes with: .. System Boot Control: The system has been set up Skipped features: boot.open-iscsi boot.cycle which very clearly informs you that iSCSI has *not* been started nor that any iSCSI devices have been attached. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.