https://bugzilla.suse.com/show_bug.cgi?id=1225296 https://bugzilla.suse.com/show_bug.cgi?id=1225296#c3 --- Comment #3 from Martin Schmidt <martin.schmidt@io-warnemuende.de> --- Moin, moin, the hardware is pretty old, but there is no reason to replace it until now. Having many windows and simple graphics - also with good resolution - open at the same time works well. Just a workbench for editing texts, programming and so on. hwinfo --gfxcard: 12: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: VCu0.NpzQxy0mUR4 Parent ID: vSkL.A99aFZ6svBE SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "nVidia GT218 [NVS 300]" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x10d8 "GT218 [NVS 300]" SubVendor: pci 0x10de "nVidia Corporation" SubDevice: pci 0x0862 Revision: 0xa2 Driver: "nouveau" Driver Modules: "nouveau" Memory Range: 0xf6000000-0xf6ffffff (rw,non-prefetchable) Memory Range: 0xf0000000-0xf3ffffff (ro,non-prefetchable) Memory Range: 0xf4000000-0xf5ffffff (ro,non-prefetchable) I/O Ports: 0xe000-0xefff (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 28 (1261 events) Module Alias: "pci:v000010DEd000010D8sv000010DEsd00000862bc03sc00i00" Driver Info #0: Driver Status: nouveau is active Driver Activation Cmd: "modprobe nouveau" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #10 (PCI bridge) Primary display adapter: #12 Also the hardware information of yast recognises only one monitor. xrandr -q Screen 0: minimum 1 x 1, current 2560 x 1295, maximum 16384 x 16384 Virtual1 connected primary 2560x1295+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 2560x1295 60.00*+ 3840x2400 59.97 .... Virtual2 disconnected (normal left inverted right x axis y axis) .... the same until Virtual8. The logfile is uploaded as attachment. Cheers, Martin Schmidt -- You are receiving this mail because: You are on the CC list for the bug.