https://bugzilla.novell.com/show_bug.cgi?id=679685 https://bugzilla.novell.com/show_bug.cgi?id=679685#c3 Tomas Jensen <tcj@tomas.dk> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |tcj@tomas.dk --- Comment #3 from Tomas Jensen <tcj@tomas.dk> 2011-03-24 10:57:24 UTC --- System freeze with only VLAN configured. The only vlan configured are vlan2 and vlan3. Boot stops/hang when network(s) are being setup BUT only when link is detected. With no cable inserted the system boots up. My vlan config is as follows: /etc/sysconfig/network/ifcg-vlan2: BOOTPROTO='static' ETHERDEVICE='eth0' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='192.168.130.99/24' MTU='1500' NAME='RTL8111/8168B PCI Express Gigabit Ethernet controller' NETWORK='192.168.130.0' GATEWAY='192.168.2.99' BROADCAST='192.168.130.255' REMOTE_IPADDR='' STARTMODE='onboot' USERCONTROL='no' ALLMULTI=yes /etc/sysconfig/network/ifcg-vlan3: BOOTPROTO='static' ETHERDEVICE='eth0' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='192.168.2.99/24' MTU='1500' NAME='RTL8111/8168B PCI Express Gigabit Ethernet controller' NETWORK='192.168.2.0' BROADCAST='192.168.2.255' GATEWAY='192.168.2.99' REMOTE_IPADDR='' STARTMODE='onboot' USERCONTROL='no' -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.