https://bugzilla.novell.com/show_bug.cgi?id=878667 https://bugzilla.novell.com/show_bug.cgi?id=878667#c0 Summary: Screen rotation not working with Intel driver Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs@forge.provo.novell.com ReportedBy: rschweikert@suse.com QAContact: xorg-maintainer-bugs@forge.provo.novell.com Found By: --- Blocker: --- I have a 3 monitor setup: 2 Dell: SR2320L (1920x1080) 1 Viewsonic: VA2226W (1680x1050) The 2 Dell monitors are connected to a Zotac GeForce GT630 based card and the Viewsonic monitor is connected to the DVI connector on the mother board driven by the Intel i7-4770. Rotation of the display connected to the mother board fails (Monitor 3, Viewsonic). I have the monitor rotated to get more vertical screen real estate, but the display is not playing along. When using: xrandr --output HDMI2 --right-of DVI-I-1 --rotate right Terminals on my other screens disappear and the display on the 3rd monitor is not affected, i.e. everything is still sideways. Using: xrandr --output HDMI2 --right-of DVI-I-1 --rotate left The background on the 3rd monitor is messed up and things are still sideways. And I get the following error: X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 7 (RRSetScreenSize) Value in failed request: 0x0 Serial number of failed request: 61 Current serial number in output stream: 62 The display operates properly when using xrandr --output HDMI2 --right-of DVI-I-1 --rotate normal but then everything is displayed sideways as the monitor is set up on end. This makes it very difficult to work with ;) Thus this appears to be a bug in the Intel graphics driver. For the GeForce based card I am using nouveau diver and the i915 driver is loaded for the Intel integrated graphics: drm 313440 6 i915,nouveau,ttm,drm_kms_helper video 19507 3 asus_wmi,i915,nouveau All monitors are connected via DVI cable (the Zotac card provides 2 outputs), although the connection to the mother board is identified by "xrandr -q" as HDMI2. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.