http://bugzilla.novell.com/show_bug.cgi?id=574749 http://bugzilla.novell.com/show_bug.cgi?id=574749#c6 --- Comment #6 from Robin Knapp <robin.knapp@ts.fujitsu.com> 2010-04-12 00:27:44 CEST --- Created an attachment (id=353616) --> (http://bugzilla.novell.com/attachment.cgi?id=353616) dmesg output Ok, this kept my little cells busy, so I tried it althoug it's late... Here's the hwinfo out: 25: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.318] Unique ID: VCu0.OEBUnlVxQI8 Parent ID: vSkL.RA714lUVE7D SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "ATI Radeon Mobility X600 (M24) 3150 (PCIE)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x3150 "Radeon Mobility X600 (M24) 3150 (PCIE)" SubVendor: pci 0x10cf "Fujitsu Limited." SubDevice: pci 0x12f5 Driver: "radeon" Driver Modules: "drm" Memory Range: 0xd0000000-0xd7ffffff (ro,non-prefetchable) I/O Ports: 0x3000-0x3fff (rw) Memory Range: 0xc8100000-0xc810ffff (rw,non-prefetchable) Memory Range: 0xc8120000-0xc813ffff (ro,non-prefetchable,disabled) IRQ: 27 (1377 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00001002d00003150sv000010CFsd000012F5bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: radeon Driver Info #1: XFree86 v4 Server Module: radeon 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (PCI bridge) Primary display adapter: #25 But it seems to be a LiveCD issue - the radeon module is not loaded. When loading it with modprobe, it switches to the native resolution of the Display. DRI should work, but it seems to be incompatible with my gfxcard. Starting X is very slow, the fan turns faster and I see GPU reset messages on the console. See attachment for full dmesg, the interesting stuff starts at second 100. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.