[Bug 551641] Kernel thinks it has Transmeta CPU instead of Intel and shows only one instead of two CPU-cores

http://bugzilla.novell.com/show_bug.cgi?id=551641 User henk.vanvelden@xs4all.nl added comment http://bugzilla.novell.com/show_bug.cgi?id=551641#c3 --- Comment #3 from Henk van Velden <henk.vanvelden@xs4all.nl> 2009-11-02 03:54:19 MST --- The conclusion that the kernel sees a Transmeta CPU is completely wrong! This makes also the title of this bug bogus. It should read: "Only one of two CPU kernels initialized". I also started a bug at bugzilla.kernel.org: 14525 Below is the COMPLETTE dmesg: [ 0.000000] Linux version 2.6.31.5-0.1-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fedf800 (usable) [ 0.000000] BIOS-e820: 000000003fedf800 - 000000003fee0000 (reserved) [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fedf max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fedf800 (usable) [ 0.000000] modified: 000000003fedf800 - 000000003fee0000 (reserved) [ 0.000000] modified: 000000003fee0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] modified: 000000003fee3000 - 000000003fef0000 (ACPI data) [ 0.000000] modified: 000000003fef0000 - 000000003ff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 01000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0036e00000 page 2M [ 0.000000] 0036e00000 - 0036ffe000 page 4k [ 0.000000] kernel direct mapping tables up to 36ffe000 @ 10000-1b000 [ 0.000000] RAMDISK: 378c7000 - 37fef30a [ 0.000000] Allocated new RAMDISK: 00af7000 - 0121f30a [ 0.000000] Move RAMDISK from 00000000378c7000 - 0000000037fef309 to 00af7000 - 0121f309 [ 0.000000] ACPI: RSDP 000f7fe0 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 3fee30c0 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fee7940 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fee3280 04671 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 3fee0000 00040 [ 0.000000] ACPI: SLIC 3fee7b80 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: HPET 3fee7d40 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 3fee7dc0 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 3fee7a80 00084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 3fee8320 00304 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] could not find any ACPI SRAT memory areas. [ 0.000000] failed to get NUMA memory information from SRAT table [ 0.000000] NUMA - single node, flat memory mode [ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3fedf [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 [ 0.000000] node 0 pfn: [0 - 3fedf] [ 0.000000] Reserving 2048 pages of KVA for lmem_map of node 0 at 3f600 [ 0.000000] remove_active_range (0, 259584, 261632) [ 0.000000] Reserving total of 800 pages for numa KVA remap [ 0.000000] kva_start_pfn ~ 36600 max_low_pfn ~ 36ffe [ 0.000000] max_pfn = 3fedf [ 0.000000] 142MB HIGHMEM available. [ 0.000000] 879MB LOWMEM available. [ 0.000000] max_low_pfn = 36ffe, highstart_pfn = 36ffe [ 0.000000] Low memory ends at vaddr f6ffe000 [ 0.000000] node 0 will remap to vaddr f6600000 - f6e00000 [ 0.000000] allocate_pgdat: node 0 NODE_DATA f6600000 [ 0.000000] remap_numa_kva: node 0 [ 0.000000] remap_numa_kva: f6600000 to pfn 0003f600 [ 0.000000] remap_numa_kva: f6800000 to pfn 0003f800 [ 0.000000] remap_numa_kva: f6a00000 to pfn 0003fa00 [ 0.000000] remap_numa_kva: f6c00000 to pfn 0003fc00 [ 0.000000] High memory starts at vaddr f6ffe000 [ 0.000000] mapped low ram: 0 - 36ffe000 [ 0.000000] low ram: 0 - 36ffe000 [ 0.000000] node 0 low ram: 00000000 - 36ffe000 [ 0.000000] node 0 bootmap 00018000 - 0001ee00 [ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 0036ffe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000200000 - 0000aeda90] TEXT DATA BSS ==> [0000200000 - 0000aeda90] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0000aee000 - 0000af65e4] BRK ==> [0000aee000 - 0000af65e4] [ 0.000000] #6 [0000010000 - 0000018000] PGTABLE ==> [0000010000 - 0000018000] [ 0.000000] #7 [0000af7000 - 000121f30a] NEW RAMDISK ==> [0000af7000 - 000121f30a] [ 0.000000] #8 [003f600000 - 003fe00000] KVA RAM [ 0.000000] #9 [0036600000 - 0036e00000] KVA PG ==> [0036600000 - 0036e00000] [ 0.000000] #10 [0000018000 - 000001f000] BOOTMAP ==> [0000018000 - 000001f000] [ 0.000000] found SMP MP-table at [c00f5c10] f5c10 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00036ffe [ 0.000000] HighMem 0x00036ffe -> 0x0003fedf [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f600 [ 0.000000] 0: 0x0003fe00 -> 0x0003fedf [ 0.000000] On node 0 totalpages: 259694 [ 0.000000] free_area_init_node: node 0, pgdat f6600000, node_mem_map c1220200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 219454 pages, LIFO batch:31 [ 0.000000] HighMem zone: 286 pages used for memmap [ 0.000000] HighMem zone: 34243 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #4 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:b0100000) [ 0.000000] NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:8 [ 0.000000] PERCPU: Embedded 14 pages at c1a25000, static data 34204 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257648 [ 0.000000] Policy zone: HighMem [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-Hitachi_HDT725032VLA380_VFJ201R23XUEXW-part5 nolapic resume=/dev/disk/by-id/ata-Hitachi_HDT725032VLA380_VFJ201R23XUEXW-part1 splash=silent quiet vga=0x31a [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00036ffe:0003fedf) [ 0.000000] Memory: 1004908k/1047420k available (4719k kernel code, 33868k reserved, 2944k data, 464k init, 138116k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xff5b5000 - 0xfffff000 (10536 kB) [ 0.000000] pkmap : 0xff000000 - 0xff200000 (2048 kB) [ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB) [ 0.000000] .init : 0xc097d000 - 0xc09f1000 ( 464 kB) [ 0.000000] .data : 0xc069bd42 - 0xc097c008 (2944 kB) [ 0.000000] .text : 0xc0200000 - 0xc069bd42 (4719 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1600.444 MHz processor. [ 0.000115] Console: colour dummy device 80x25 [ 0.000120] console [tty0] enabled [ 0.000343] hpet clockevent registered [ 0.000348] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000353] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.88 BogoMIPS (lpj=1600444) [ 0.031296] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.031402] Security Framework initialized [ 0.031421] AppArmor: AppArmor initialized [ 0.031448] Mount-cache hash table entries: 512 [ 0.031624] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.031628] CPU: L2 cache: 1024K [ 0.031632] CPU: Physical Processor ID: 0 [ 0.031634] CPU: Processor Core ID: 0 [ 0.031639] mce: CPU supports 6 MCE banks [ 0.031649] CPU0: Thermal monitoring enabled (TM2) [ 0.031654] using mwait in idle threads. [ 0.031660] Performance Counters: Core2 events, Intel PMU driver. [ 0.031667] ... version: 2 [ 0.031669] ... bit width: 40 [ 0.031672] ... generic counters: 2 [ 0.031674] ... value mask: 000000ffffffffff [ 0.031677] ... max period: 000000007fffffff [ 0.031680] ... fixed-purpose counters: 3 [ 0.031682] ... counter mask: 0000000700000003 [ 0.031688] Checking 'hlt' instruction... OK. [ 0.036566] ACPI: Core revision 20090521 [ 0.048671] ACPI: setting ELCR to 0200 (from 0ca8) [ 0.049087] SMP disabled [ 0.049093] Mapping cpu 0 to node 0 [ 0.050040] Brought up 1 CPUs [ 0.050045] Total of 1 processors activated (3200.88 BogoMIPS). [ 0.050090] CPU0 attaching NULL sched-domain. [ 0.052018] devtmpfs: initialized [ 0.052215] Booting paravirtualized kernel on bare hardware [ 0.052501] regulator: core version 0.5 [ 0.052530] Time: 9:17:51 Date: 11/02/09 [ 0.052614] NET: Registered protocol family 16 [ 0.052801] ACPI: bus type pci registered [ 0.052897] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.052901] PCI: MCFG area at f0000000 reserved in E820 [ 0.052904] PCI: Using MMCONFIG for extended config space [ 0.052907] PCI: Using configuration type 1 for base access [ 0.055105] bio: create slab <bio-0> at 0 [ 0.057514] ACPI: EC: Look up EC in DSDT [ 0.070162] ACPI: Interpreter enabled [ 0.070173] ACPI: (supports S0 S1 S3 S4 S5) [ 0.070225] ACPI: Using PIC for interrupt routing [ 0.080232] ACPI: No dock devices found. [ 0.080406] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.080568] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.080573] pci 0000:00:01.0: PME# disabled [ 0.080656] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.080709] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.080714] pci 0000:00:1b.0: PME# disabled [ 0.080768] pci 0000:00:1d.0: reg 20 io port: [0xff00-0xff1f] [ 0.080829] pci 0000:00:1d.1: reg 20 io port: [0xfe00-0xfe1f] [ 0.080888] pci 0000:00:1d.2: reg 20 io port: [0xfd00-0xfd1f] [ 0.080949] pci 0000:00:1d.3: reg 20 io port: [0xfc00-0xfc1f] [ 0.081019] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] [ 0.081076] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.081082] pci 0000:00:1d.7: PME# disabled [ 0.081280] pci 0000:00:1f.2: reg 10 io port: [0xfb00-0xfb07] [ 0.081288] pci 0000:00:1f.2: reg 14 io port: [0xfa00-0xfa03] [ 0.081296] pci 0000:00:1f.2: reg 18 io port: [0xf900-0xf907] [ 0.081304] pci 0000:00:1f.2: reg 1c io port: [0xf800-0xf803] [ 0.081312] pci 0000:00:1f.2: reg 20 io port: [0xf700-0xf70f] [ 0.081320] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff] [ 0.081352] pci 0000:00:1f.2: PME# supported from D3hot [ 0.081357] pci 0000:00:1f.2: PME# disabled [ 0.081413] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.081482] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.081494] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.081505] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff] [ 0.081517] pci 0000:01:00.0: reg 30 32bit mmio: [0xfcfe0000-0xfcffffff] [ 0.081562] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.081636] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfcffffff] [ 0.081643] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.081693] pci 0000:02:01.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff] [ 0.081761] pci 0000:02:01.0: supports D1 D2 [ 0.081764] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot [ 0.081770] pci 0000:02:01.0: PME# disabled [ 0.081823] pci 0000:02:04.0: reg 10 32bit mmio: [0xfdefe000-0xfdefe7ff] [ 0.081892] pci 0000:02:04.0: supports D1 D2 [ 0.081945] pci 0000:02:08.0: reg 10 32bit mmio: [0xfdefd000-0xfdefdfff] [ 0.081955] pci 0000:02:08.0: reg 14 io port: [0xef00-0xef3f] [ 0.082030] pci 0000:02:08.0: supports D1 D2 [ 0.082033] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.082039] pci 0000:02:08.0: PME# disabled [ 0.082089] pci 0000:00:1e.0: transparent bridge [ 0.082094] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.082100] pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.082123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.083296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.106093] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.107062] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.107253] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.107425] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.107597] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.108042] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.108215] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.108388] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 0.108696] SCSI subsystem initialized [ 0.108776] libata version 3.00 loaded. [ 0.108886] usbcore: registered new interface driver usbfs [ 0.108913] usbcore: registered new interface driver hub [ 0.108949] usbcore: registered new device driver usb [ 0.109064] PCI: Using ACPI for IRQ routing [ 0.109277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.109286] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.115496] AppArmor: AppArmor Filesystem Enabled [ 0.115520] pnp: PnP ACPI init [ 0.115543] ACPI: bus type pnp registered [ 0.119423] pnp: PnP ACPI: found 11 devices [ 0.119428] ACPI: ACPI bus type pnp unregistered [ 0.119446] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.119450] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.119455] system 00:01: ioport range 0x294-0x297 has been reserved [ 0.119459] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.119471] system 00:07: ioport range 0x400-0x4bf has been reserved [ 0.119481] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.119490] system 00:0a: iomem range 0xce200-0xcffff has been reserved [ 0.119494] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved [ 0.119499] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [ 0.119503] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [ 0.119507] system 00:0a: iomem range 0xfed00000-0xfed000ff has been reserved [ 0.119512] system 00:0a: iomem range 0x3fee0000-0x3fefffff could not be reserved [ 0.119516] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.119521] system 00:0a: iomem range 0x100000-0x3fedffff could not be reserved [ 0.119525] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.119530] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.119534] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.119538] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved [ 0.119543] system 00:0a: iomem range 0xe0000-0xeffff has been reserved [ 0.156969] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.156973] pci 0000:00:01.0: IO window: disabled [ 0.157725] pci 0000:00:01.0: MEM window: 0xfa000000-0xfcffffff [ 0.158025] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.158035] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.158040] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.158047] pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff [ 0.158052] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.158315] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 [ 0.158320] PCI: setting IRQ 5 as level-triggered [ 0.158326] pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 0.158333] pci 0000:00:01.0: setting latency timer to 64 [ 0.158343] pci 0000:00:1e.0: setting latency timer to 64 [ 0.158350] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.158354] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.158358] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff] [ 0.158362] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.158366] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.158370] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.158373] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.158377] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.158470] NET: Registered protocol family 2 [ 0.158615] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.159068] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.159545] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.159975] TCP: Hash tables configured (established 131072 bind 65536) [ 0.159980] TCP reno registered [ 0.160186] NET: Registered protocol family 1 [ 0.160284] Unpacking initramfs... [ 0.422895] Freeing initrd memory: 7328k freed [ 0.428155] Scanning for low memory corruption every 60 seconds [ 0.428383] audit: initializing netlink socket (disabled) [ 0.428414] type=2000 audit(1257153471.427:1): initialized [ 0.434707] highmem bounce pool size: 64 pages [ 0.434715] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.435758] VFS: Disk quotas dquot_6.5.2 [ 0.435827] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.436029] msgmni has been set to 426 [ 0.436166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.436171] io scheduler noop registered [ 0.436174] io scheduler anticipatory registered [ 0.436177] io scheduler deadline registered [ 0.436194] io scheduler cfq registered (default) [ 0.436399] pci 0000:01:00.0: Boot video device [ 0.436419] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.436816] alloc irq_desc for 24 on node 0 [ 0.436821] alloc kstat_irqs on node 0 [ 0.436833] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.437003] pci-stub: invalid id string "" [ 0.437175] vesafb: framebuffer at 0xe0000000, mapped to 0xf7880000, using 5120k, total 65536k [ 0.437180] vesafb: mode is 1280x1024x16, linelength=2560, pages=1 [ 0.437183] vesafb: protected mode interface info at c000:c6e0 [ 0.437186] vesafb: pmi: set display start = c00cc716, set palette = c00cc780 [ 0.437189] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.437214] vesafb: scrolling: redraw [ 0.437218] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.437426] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.459279] bootsplash: silentjpeg size 130564 bytes [ 0.491753] bootsplash: ...found (1280x1024, 29083 bytes, v3). [ 0.500739] Switched to high resolution mode on CPU 0 [ 0.579817] Console: switching to colour frame buffer device 156x60 [ 0.667318] fb0: VESA VGA frame buffer device [ 0.669624] Non-volatile memory driver v1.3 [ 0.669629] Linux agpgart interface v0.103 [ 0.669673] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.670459] ahci 0000:00:1f.2: version 3.0 [ 0.670689] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.670693] PCI: setting IRQ 11 as level-triggered [ 0.670700] ahci 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.670811] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.670816] ahci 0000:00:1f.2: flags: 64bit ncq ilck led clo [ 0.670822] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.671150] scsi0 : ahci [ 0.671286] scsi1 : ahci [ 0.671369] scsi2 : ahci [ 0.671440] scsi3 : ahci [ 0.671631] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 11 [ 0.671636] ata2: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 11 [ 0.671640] ata3: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 11 [ 0.671644] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 11 [ 0.671783] Fixed MDIO Bus: probed [ 0.671792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.672335] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 7 [ 0.672341] PCI: setting IRQ 7 as level-triggered [ 0.672349] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNK1] -> GSI 7 (level, low) -> IRQ 7 [ 0.672376] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.672382] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.672444] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.676358] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.676369] ehci_hcd 0000:00:1d.7: irq 7, io mem 0xfdfff000 [ 0.686028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.686086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.686091] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.686096] usb usb1: Product: EHCI Host Controller [ 0.686100] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd [ 0.686105] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.686252] usb usb1: configuration #1 chosen from 1 choice [ 0.686296] hub 1-0:1.0: USB hub found [ 0.686306] hub 1-0:1.0: 8 ports detected [ 0.686407] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.686429] uhci_hcd: USB Universal Host Controller Interface driver [ 0.687039] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNK1] -> GSI 7 (level, low) -> IRQ 7 [ 0.687054] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.687060] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.687076] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.687107] uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000ff00 [ 0.687171] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.687176] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.687181] usb usb2: Product: UHCI Host Controller [ 0.687185] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd [ 0.687189] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.687300] usb usb2: configuration #1 chosen from 1 choice [ 0.687341] hub 2-0:1.0: USB hub found [ 0.687351] hub 2-0:1.0: 2 ports detected [ 0.688041] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.688051] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.688057] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.688073] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.688103] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000fe00 [ 0.688156] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.688161] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.688165] usb usb3: Product: UHCI Host Controller [ 0.688169] usb usb3: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd [ 0.688174] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.688284] usb usb3: configuration #1 chosen from 1 choice [ 0.688326] hub 3-0:1.0: USB hub found [ 0.688335] hub 3-0:1.0: 2 ports detected [ 0.689303] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3 [ 0.689307] PCI: setting IRQ 3 as level-triggered [ 0.689314] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3 [ 0.689322] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.689327] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.689345] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.689373] uhci_hcd 0000:00:1d.2: irq 3, io base 0x0000fd00 [ 0.689418] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.689421] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.689425] usb usb4: Product: UHCI Host Controller [ 0.689428] usb usb4: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd [ 0.689431] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.689532] usb usb4: configuration #1 chosen from 1 choice [ 0.689573] hub 4-0:1.0: USB hub found [ 0.689582] hub 4-0:1.0: 2 ports detected [ 0.690045] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 0.690055] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.690061] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.690077] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.690109] uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000fc00 [ 0.690161] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.690166] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.690171] usb usb5: Product: UHCI Host Controller [ 0.690175] usb usb5: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd [ 0.690179] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.690288] usb usb5: configuration #1 chosen from 1 choice [ 0.690329] hub 5-0:1.0: USB hub found [ 0.690338] hub 5-0:1.0: 2 ports detected [ 0.690418] Initializing USB Mass Storage driver... [ 0.690461] usbcore: registered new interface driver usb-storage [ 0.690465] USB Mass Storage support registered. [ 0.690504] usbcore: registered new interface driver libusual [ 0.690522] usbcore: registered new interface driver ums-alauda [ 0.690540] usbcore: registered new interface driver ums-cypress [ 0.690557] usbcore: registered new interface driver ums-datafab [ 0.690574] usbcore: registered new interface driver ums-freecom [ 0.690591] usbcore: registered new interface driver ums-isd200 [ 0.690607] usbcore: registered new interface driver ums-jumpshot [ 0.690632] usbcore: registered new interface driver ums-karma [ 0.690651] usbcore: registered new interface driver ums-onetouch [ 0.690668] usbcore: registered new interface driver ums-sddr09 [ 0.690686] usbcore: registered new interface driver ums-sddr55 [ 0.690703] usbcore: registered new interface driver ums-usbat [ 0.690778] PNP: No PS/2 controller found. Probing ports directly. [ 0.691144] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.691152] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.691235] mice: PS/2 mouse device common for all mice [ 0.691388] rtc_cmos 00:04: RTC can wake from S4 [ 0.691449] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.691471] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.691489] cpuidle: using governor ladder [ 0.691492] cpuidle: using governor menu [ 0.691873] usbcore: registered new interface driver hiddev [ 0.691896] usbcore: registered new interface driver usbhid [ 0.691900] usbhid: v2.6:USB HID core driver [ 0.778978] TCP cubic registered [ 0.779066] NET: Registered protocol family 10 [ 0.779706] lo: Disabled Privacy Extensions [ 0.780238] lib80211: common routines for IEEE802.11 drivers [ 0.780242] lib80211_crypt: registered algorithm 'NULL' [ 0.780261] Using IPI No-Shortcut mode [ 0.780375] PM: Checking image partition /dev/disk/by-id/ata-Hitachi_HDT725032VLA380_VFJ201R23XUEXW-part1 [ 0.976040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.976064] ata4: SATA link down (SStatus 0 SControl 300) [ 0.976094] ata2: SATA link down (SStatus 0 SControl 300) [ 0.976781] ata1.00: ATA-7: Hitachi HDT725032VLA380, V54OA7BA, max UDMA/133 [ 0.976787] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.977786] ata1.00: configured for UDMA/133 [ 0.977961] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5 [ 0.978226] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.978294] sd 0:0:0:0: [sda] Write Protect is off [ 0.978298] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.978334] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.978513] sda: sda1 sda2 sda3 sda4 < sda5 > [ 1.029594] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.243029] usb 1-5: new high speed USB device using ehci_hcd and address 5 [ 1.394032] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.397127] ata3.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0514, max UDMA/33, ATAPI AN [ 1.397154] ata3.00: applying bridge limits [ 1.400795] ata3.00: configured for UDMA/33 [ 1.402677] scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0514 PQ: 0 ANSI: 5 [ 1.402874] PM: Resume from disk failed. [ 1.402897] registered taskstats version 1 [ 1.403044] Magic number: 1:851:271 [ 1.403114] rtc_cmos 00:04: setting system clock to 2009-11-02 09:18:01 UTC (1257153481) [ 1.403248] Freeing unused kernel memory: 464k freed [ 1.403476] Write protecting the kernel text: 4720k [ 1.403639] Write protecting the kernel read-only data: 2704k [ 1.454611] ACPI: SSDT 3fee7e40 00175 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 1.455061] processor LNXCPU:00: registered as cooling_device0 [ 1.460360] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.460382] ACPI: Thermal Zone [THRM] (40 C) [ 1.463615] fan PNP0C0B:00: registered as cooling_device1 [ 1.463623] ACPI: Fan [FAN] (on) [ 1.471150] udev: starting version 146 [ 1.520971] usb 1-5: New USB device found, idVendor=15a9, idProduct=0004 [ 1.520976] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.520981] usb 1-5: Product: 802.11 bg WLAN [ 1.520984] usb 1-5: Manufacturer: Ralink [ 1.521136] usb 1-5: configuration #1 chosen from 1 choice [ 1.623042] usb 1-8: new high speed USB device using ehci_hcd and address 6 [ 1.755850] usb 1-8: New USB device found, idVendor=0bda, idProduct=0111 [ 1.755858] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.755863] usb 1-8: Product: USB2.0-CRW [ 1.755867] usb 1-8: Manufacturer: Generic [ 1.755871] usb 1-8: SerialNumber: 20021111153705700 [ 1.756059] usb 1-8: configuration #1 chosen from 1 choice [ 1.757796] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.758219] usb-storage: device found at 6 [ 1.758222] usb-storage: waiting for device to settle before scanning [ 1.881989] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 1.881997] PM: Basic memory bitmaps created [ 1.895868] PM: Basic memory bitmaps freed [ 1.957001] PM: Starting manual resume from disk [ 1.957037] PM: Resume from partition 8:1 [ 1.957040] PM: Checking hibernation image. [ 1.957211] PM: Resume from disk failed. [ 1.964049] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 2.151227] usb 2-1: New USB device found, idVendor=03f0, idProduct=7e04 [ 2.151234] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.151239] usb 2-1: Product: Deskjet F4100 series [ 2.151243] usb 2-1: Manufacturer: HP [ 2.151247] usb 2-1: SerialNumber: CN7592H1KH04TJ [ 2.151400] usb 2-1: configuration #1 chosen from 1 choice [ 2.331856] kjournald starting. Commit interval 15 seconds [ 2.343742] EXT3 FS on sda5, internal journal [ 2.343751] EXT3-fs: mounted filesystem with ordered data mode. [ 2.360040] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 2.527232] usb 3-1: New USB device found, idVendor=03f0, idProduct=0f0c [ 2.527239] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.527244] usb 3-1: Product: USB Multimedia Cordless Kit [ 2.527248] usb 3-1: Manufacturer: BTC [ 2.527403] usb 3-1: configuration #1 chosen from 1 choice [ 2.545617] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input0 [ 2.545710] generic-usb 0003:03F0:0F0C.0001: input,hidraw0: USB HID v1.11 Keyboard [BTC USB Multimedia Cordless Kit] on usb-0000:00:1d.1-1/input0 [ 2.581875] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input1 [ 2.582073] generic-usb 0003:03F0:0F0C.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [BTC USB Multimedia Cordless Kit] on usb-0000:00:1d.1-1/input1 [ 2.764680] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 2.771434] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 2.778934] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 2.780653] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 2.787305] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 2.788043] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 2.789973] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 2.790774] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 2.791932] usb-storage: device scan complete [ 2.791964] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 2.940247] usb 3-2: New USB device found, idVendor=0c45, idProduct=182e [ 2.940253] usb 3-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.940259] usb 3-2: Product: USB Headset [ 2.940263] usb 3-2: Manufacturer: GENERIC [ 2.940398] usb 3-2: configuration #1 chosen from 1 choice [ 2.947329] input: GENERIC USB Headset as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.3/input/input2 [ 2.947456] generic-usb 0003:0C45:182E.0003: input,hidraw2: USB HID v1.00 Device [GENERIC USB Headset] on usb-0000:00:1d.1-2/input3 [ 4.114162] udev: starting version 146 [ 4.208062] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.208125] ACPI: Power Button [PWRF] [ 4.208204] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 4.208240] ACPI: Power Button [PWRB] [ 4.334879] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.334924] scsi 2:0:0:0: Attached scsi generic sg1 type 5 [ 4.334972] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 4.335033] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 4.335076] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 4.335118] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 4.513155] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 4.513160] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.514503] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 [ 4.514508] PCI: setting IRQ 10 as level-triggered [ 4.514515] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 4.526029] iTCO_vendor_support: vendor-support=0 [ 4.532303] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.532309] Uniform CD-ROM driver Revision: 3.20 [ 4.532461] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 4.553987] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 4.564441] e100 0000:02:08.0: PME# disabled [ 4.565516] e100: eth0: e100_probe: addr 0xfdefd000, irq 10, MAC addr 00:1b:fc:7f:c1:ef [ 5.472640] nvidia: module license 'NVIDIA' taints kernel. [ 5.472647] Disabling lock debugging due to kernel taint [ 5.509543] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 5.509647] iTCO_wdt: Found a ICH7DH TCO device (Version=2, TCOBASE=0x0460) [ 5.509722] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.697440] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 5.775052] ohci1394 0000:02:01.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 5.777701] nvidia 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 5.777711] nvidia 0000:01:00.0: setting latency timer to 64 [ 5.778206] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 5.826066] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [ 5.829601] cfg80211: Calling CRDA to update world regulatory domain [ 6.285321] Linux video capture interface: v2.00 [ 6.600729] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 6.600767] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.692702] usbcore: registered new interface driver snd-usb-audio [ 6.826982] saa7130/34: v4l2 driver version 0.2.15 loaded [ 6.835073] saa7134 0000:02:04.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 6.835085] saa7133[0]: found at 0000:02:04.0, rev: 209, irq: 5, latency: 32, mmio: 0xfdefe000 [ 6.835094] saa7133[0]: subsystem: 1043:4871, board: ASUS P7131 4871 [card=111,autodetected] [ 6.835132] saa7133[0]: board init: gpio is 0 [ 6.835145] IRQ 5/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 6.841280] hda_codec: ALC888: BIOS auto-probing. [ 6.841288] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) [ 6.841295] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.841301] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3889: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 6.841318] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0 [ 6.841323] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3893: dig-out=0x1e/0x0 [ 6.841338] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3901: inputs: mic=0x18, fmic=0x0, line=0x1a, fline=0x0, cd=0x0, aux=0x0 [ 6.842298] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/patch_realtek.c:1282: realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d [ 6.842304] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/patch_realtek.c:1357: realtek: Enable default setup for auto mode as fallback [ 6.842396] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 6.983027] saa7133[0]: i2c eeprom 00: 43 10 71 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 6.983053] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 6.983076] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 00 01 03 08 ff 00 cf ff ff ff ff [ 6.983099] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983123] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 22 15 50 ff ff ff ff ff ff [ 6.983146] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983169] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983192] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983215] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983243] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983260] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983278] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983295] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983312] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983329] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983346] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983366] i2c-adapter i2c-1: Invalid 7-bit address 0x7a [ 7.017513] usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E04 [ 7.017553] usbcore: registered new interface driver usblp [ 7.085234] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000151d97a] [ 7.348160] tuner 1-004b: chip found @ 0x96 (saa7133[0]) [ 7.383465] tda829x 1-004b: setting tuner address to 61 [ 7.447021] tda829x 1-004b: type set to tda8290+75a [ 7.697299] phy0: Selected rate control algorithm 'minstrel' [ 7.698340] Registered led device: rt73usb-phy0::radio [ 7.698364] Registered led device: rt73usb-phy0::assoc [ 7.698386] Registered led device: rt73usb-phy0::quality [ 7.698877] usbcore: registered new interface driver rt73usb [ 10.146211] saa7133[0]: registered device video0 [v4l2] [ 10.146302] saa7133[0]: registered device vbi0 [ 10.275642] dvb_init() allocating 1 frontend [ 10.308164] DVB: registering new adapter (saa7133[0]) [ 10.308171] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... [ 10.344025] tda1004x: setting up plls for 48MHz sampling clock [ 12.518025] tda1004x: timeout waiting for DSP ready [ 12.528024] tda1004x: found firmware revision 0 -- invalid [ 12.528028] tda1004x: trying to boot from eeprom [ 14.835026] tda1004x: timeout waiting for DSP ready [ 14.845024] tda1004x: found firmware revision 0 -- invalid [ 14.845028] tda1004x: waiting for firmware upload... [ 14.845036] saa7134 0000:02:04.0: firmware: requesting dvb-fe-tda10046.fw [ 14.888919] saa7134 0000:02:04.0: firmware: requesting dvb-fe-tda10045.fw [ 14.902980] tda1004x: no firmware upload (timeout or file not found?) [ 14.902998] tda1004x: firmware upload failed [ 15.035600] saa7134 ALSA driver for DMA sound loaded [ 15.035616] IRQ 5/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 15.035646] saa7133[0]/alsa: saa7133[0] at 0xfdefe000 irq 5 registered as card -1 [ 15.114686] Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k [ 15.682505] device-mapper: uevent: version 1.0.3 [ 15.683134] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 15.990096] loop: module loaded [ 16.016820] kjournald starting. Commit interval 15 seconds [ 16.016837] EXT3-fs: mounted filesystem with ordered data mode. [ 16.053433] EXT3-fs: mounted filesystem with ordered data mode. [ 16.056215] kjournald starting. Commit interval 15 seconds [ 16.278252] fuse init (API version 7.12) [ 18.967337] powernow: This module only works with AMD K7 CPUs [ 19.577956] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.704172] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 21.704490] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.221026] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 28.437467] bootsplash: status on console 0 changed to on [ 32.215017] eth0: no IPv6 routers present [ 39.186601] CPU0 attaching NULL sched-domain. [ 39.186677] CPU0 attaching NULL sched-domain. It shows that two CPUs are found initialy, but that only one is initialized. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.