https://bugzilla.novell.com/show_bug.cgi?id=387064 User dirk@goe.net added comment https://bugzilla.novell.com/show_bug.cgi?id=387064#c8 Dirk von Suchodoletz <dirk@goe.net> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |dirk@goe.net --- Comment #8 from Dirk von Suchodoletz <dirk@goe.net> 2008-05-27 07:10:37 MDT --- (In reply to comment #1 from Steffen Winterfeldt)
Better?
22: None 00.0: 10002 LCD Monitor [Created at monitor.123] Unique ID: rdCR.M51vBulxIcD Parent ID: 0sfv.TmsEr+2Tq2B Hardware Class: monitor Model: "PHILIPS Philips 200W" Vendor: PHL "PHILIPS" Device: eisa 0x0832 "Philips 200W" Serial ID: "VN 015006" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@72Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1152x864@70Hz Resolution: 1152x864@75Hz Resolution: 1280x960@60Hz Resolution: 1280x1024@60Hz Resolution: 1680x1050@60Hz Size: 433x271 mm Detailed Timings #0: Resolution: 1680x1050 Horizontal: 1680 1784 1960 2240 (+104 +280 +560) +hsync Vertical: 1050 1053 1059 1089 (+3 +9 +39) +vsync Frequencies: 146.00 MHz, 65.18 kHz, 59.85 Hz Driver Info #0: Max. Resolution: 1680x1050 Vert. Sync Range: 56-85 Hz Hor. Sync Range: 30-93 kHz Bandwidth: 146 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (VGA compatible controller)
23: None 01.0: 10002 LCD Monitor [Created at monitor.123] Unique ID: wkFv.M51vBulxIcD Parent ID: 0sfv.TmsEr+2Tq2B Hardware Class: monitor Model: "PHILIPS Philips 200W" Vendor: PHL "PHILIPS" Device: eisa 0x0832 "Philips 200W" Serial ID: "VN 015006" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@72Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1152x864@70Hz Resolution: 1152x864@75Hz Resolution: 1280x960@60Hz Resolution: 1280x1024@60Hz Resolution: 1680x1050@60Hz Size: 433x271 mm Detailed Timings #0: Resolution: 1680x1050 Horizontal: 1680 1784 1960 2240 (+104 +280 +560) +hsync Vertical: 1050 1053 1059 1089 (+3 +9 +39) +vsync Frequencies: 146.00 MHz, 65.18 kHz, 59.85 Hz Driver Info #0: Max. Resolution: 1680x1050 Vert. Sync Range: 56-85 Hz Hor. Sync Range: 30-93 kHz Bandwidth: 146 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (VGA compatible controller)
Exactly the same problem on this graphics adaptor: 13: PCI 105.0: 0300 VGA compatible controller (VGA) [Created at pci.310] UDI: /org/freedesktop/Hal/devices/pci_1002_5974 Unique ID: ul7N.CqDzDJhz157 Parent ID: vSkL.dQFUNbiC_g9 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0 SysFS BusID: 0000:01:05.0 Hardware Class: graphics card Model: "Hewlett-Packard Company DC5750 Microtower" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x5974 "Radeon XPRESS 200 5974 (PCIE)" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x280a "DC5750 Microtower" Memory Range: 0xc8000000-0xcfffffff (rw,prefetchable) I/O Ports: 0x1100-0x11ff (rw) Memory Range: 0xd8500000-0xd850ffff (rw,non-prefetchable) IRQ: 10 (no events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00001002d00005974sv0000103Csd0000280Abc03sc00i00" Driver Info #0: XFree86 v4 Server Module: radeon Driver Info #1: XFree86 v4 Server Module: fglrx 3D Support: yes Extensions: dri Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #31 (PCI bridge) Several problems in that scenario: - if only one display is connected to either DVI or VGA the monitor is detected correctly, but displayed twice in the list with exactly the same values (only prefix of unique ID is different) - if a display is connected to DVI and a switched off display is on VGA no info is delivered (just the generic monitor info) - if two displays are connected to DVI and VGA only the info from the VGA channel is duplicated (just as shown in Olafs posting) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.