
http://bugzilla.novell.com/show_bug.cgi?id=598193 http://bugzilla.novell.com/show_bug.cgi?id=598193#c54 Thomas Langkamp <langkamp@tomblog.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |langkamp@tomblog.de --- Comment #54 from Thomas Langkamp <langkamp@tomblog.de> 2010-06-18 09:47:17 UTC --- Hi all, I think I´ve got a related bug - made fresh install of M7 on and SSD (ata2; zypper dup then to RC1, all worked smooth) - but they do not recognize that two other HDDs (ata5 and 6) of my system are bundled as raid - yasts partition-manager only sees the two additional hdds, not the raid-partitions. With 11.2 that worked fine. So I would also not be able to install on that raid (it was also not recognized during installation of M7). I hope this information is useful for you. If someone gives me a hint what to hack into the command line I can give additional informations for my system... part of dmesg: [ 1.309077] scsi0-5 : ahci [ 1.309658] ata1: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 27 [ 1.309661] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27 [ 1.309663] ata3: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea00 irq 27 [ 1.309666] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27 [ 1.309668] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27 [ 1.309670] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27 [ 1.767055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.772841] ata1.00: ATA-8: SAMSUNG HD153WI, 1AN10002, max UDMA/133 [ 1.772846] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.778694] ata1.00: configured for UDMA/133 [ 1.789120] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD153WI 1AN1 PQ: 0 ANSI: 5 [ 2.665031] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.724523] ata2.00: ATA-8: OCZ-AGILITY2, 1.00, max UDMA/133 [ 2.724527] ata2.00: 97696368 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.774701] ata2.00: configured for UDMA/133 [ 2.785150] scsi 1:0:0:0: Direct-Access ATA OCZ-AGILITY2 1.00 PQ: 0 ANSI: 5 [ 3.090024] ata3: SATA link down (SStatus 0 SControl 300) [ 3.977041] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.979039] ata4.00: ATAPI: Optiarc DVD RW AD-7240S, 1.04, max UDMA/100, ATAPI AN [ 3.981224] ata4.00: configured for UDMA/100 [ 3.993219] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7240S 1.04 PQ: 0 ANSI: 5 [ 4.869031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.875383] ata5.00: ATA-7: SAMSUNG HD322HJ, 1AC01113, max UDMA7 [ 4.875387] ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.881825] ata5.00: configured for UDMA/133 [ 4.892099] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5 [ 5.768041] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.774396] ata6.00: ATA-7: SAMSUNG HD322HJ, 1AC01113, max UDMA7 [ 5.774400] ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.780843] ata6.00: configured for UDMA/133 [ 5.791097] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5 [ 5.806097] udev: starting version 157 [ 5.851938] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 5.851969] sd 1:0:0:0: [sdb] 97696368 512-byte logical blocks: (50.0 GB/46.5 GiB) [ 5.851997] sd 0:0:0:0: [sda] Write Protect is off [ 5.852015] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.852019] sd 1:0:0:0: [sdb] Write Protect is off [ 5.852022] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.852039] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.852044] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.852231] sda: [ 5.852263] sdb: sdb1 sdb2 [ 5.852798] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.852828] sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 5.852869] sd 4:0:0:0: [sdc] Write Protect is off [ 5.852871] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.852889] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.852989] sdc: sdc1 sdc2 [ 5.855465] sdc: p2 size 1250066432 exceeds device capacity, limited to end of disk [ 5.855665] sd 4:0:0:0: [sdc] Attached SCSI disk [ 5.855689] sd 5:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 5.855730] sd 5:0:0:0: [sdd] Write Protect is off [ 5.855732] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 5.855750] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.855862] sdd: sda1 [ 5.864681] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.878327] sdd1 [ 5.878658] sd 5:0:0:0: [sdd] Attached SCSI disk [ 5.933523] [drm] Initialized drm 1.1.0 20060810 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.