https://bugzilla.novell.com/show_bug.cgi?id=637235 https://bugzilla.novell.com/show_bug.cgi?id=637235#c3 Matthias Meinke <matthias@aia.rwth-aachen.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |matthias@aia.rwth-aachen.de Component|Kernel |Kernel Product|openSUSE 11.4 |openSUSE 11.3 Severity|Major |Normal --- Comment #3 from Matthias Meinke <matthias@aia.rwth-aachen.de> 2010-09-29 07:54:59 UTC --- I have a similar problem, I also get many messages of the following form which grows my /var/log/messages file to several 100 Mbytes per day: ... kernel: [72235.394434] huh, entered softirq 3 NET_RX ffffffff814153c0 preempt_count 00000102, exited with 00000103? I am using the following configuration: uname -a Linux aia005 2.6.36-rc5-23-desktop #1 SMP PREEMPT 2010-09-24 13:45:31 +0200 x86_64 x86_64 x86_64 GNU/Linux The same problem also occurs for older kernel 2.6.36 versions. hwinfo --netcard 30: PCI 200.0: 0200 Ethernet controller [Created at pci.318] Unique ID: rBUF.Wqvrn1KKmEC Parent ID: HnsE.XxjdY3RiYR7 SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Attansic Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller" Vendor: pci 0x1969 "Attansic Technology Corp." Device: pci 0x1026 "Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x831c Revision: 0xb0 Driver: "ATL1E" Driver Modules: "atl1e" Device File: eth0 Memory Range: 0xfe9c0000-0xfe9fffff (rw,non-prefetchable) I/O Ports: 0xcc00-0xcc7f (rw) IRQ: 40 (2267503 events) HW Address: e0:cb:4e:b7:37:ce Link detected: yes Module Alias: "pci:v00001969d00001026sv00001043sd0000831Cbc02sc00i00" Driver Info #0: Driver Status: atl1e is active Driver Activation Cmd: "modprobe atl1e" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #18 (PCI bridge) 31: PCI 501.0: 0200 Ethernet controller [Created at pci.318] Unique ID: JNkJ.6H5DExwshr1 Parent ID: 6NW+.mTebKEmhWYA SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:05:01.0 SysFS BusID: 0000:05:01.0 Hardware Class: network Model: "3Com 3C905B Fast Etherlink XL 10/100" Vendor: pci 0x10b7 "3Com Corporation" Device: pci 0x9055 "3c905B 100BaseTX [Cyclone]" SubVendor: pci 0x10b7 "3Com Corporation" SubDevice: pci 0x9055 "3C905B Fast Etherlink XL 10/100" Revision: 0x28 Driver: "3c59x" Driver Modules: "3c59x" Device File: eth1 I/O Ports: 0xec00-0xec7f (rw) Memory Range: 0xfebffc00-0xfebffc7f (rw,non-prefetchable) Memory Range: 0xfebc0000-0xfebdffff (ro,non-prefetchable,disabled) IRQ: 17 (no events) HW Address: 00:10:4b:13:78:18 Link detected: no Module Alias: "pci:v000010B7d00009055sv000010B7sd00009055bc02sc00i00" Driver Info #0: Driver Status: 3c59x is active Driver Activation Cmd: "modprobe 3c59x" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #23 (PCI bridge) The two network cards are configured as a bridge so I can connect e.g. a notebook to the presently unused 3c59x network card. There are no such messages, when I do not configure the two cards as a bridge. Any suggestions? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.