https://bugzilla.novell.com/show_bug.cgi?id=648830 https://bugzilla.novell.com/show_bug.cgi?id=648830#c12 Vladimir Botka <vbotka@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |suse-beta@cboltz.de --- Comment #12 from Vladimir Botka <vbotka@novell.com> 2011-06-01 17:29:05 UTC --- (In reply to comment #11)
This means this bug affects probably all unencrypted networks if you use traditional network mode.
If the authentication method of the AP is set "open" and wep encryption set to "none" then you shall be able to connect from the command line as root with the command [1]. Check if the interface is connected [2] and if you have dhcp server start the dhclient [3], or setup the IP address manually. Just to be sure, this shall work if you see "Encryption key:off" on the AP you want to connect to [4]. If this procedure works for you, but you can not set it in yast, then we are going to take a look on the sysconfig next. [1] iw dev wlan0 connect SSID [2] iw dev wlan0 link [3] dhclient wlan0 [4] Cell 01 - Address: 00:18:F3:98:D1:9E Channel:1 Frequency:2.412 GHz (Channel 1) Quality=52/70 Signal level=-58 dBm Encryption key:off ESSID:"vlado-test-ap1" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=00000000947a0b7f Extra: Last beacon: 94ms ago IE: Unknown: 000E766C61646F2D746573742D617031 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: DD06001018020010 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.