https://bugzilla.novell.com/show_bug.cgi?id=773669 https://bugzilla.novell.com/show_bug.cgi?id=773669#c36 --- Comment #36 from Joey Lee <jlee@suse.com> 2012-09-18 09:15:51 UTC --- Please also help to try the following kernel parameter: + libata.dma=1 PATA and SATA Disk DMA only Please help to check does following message in boot.msg? <3>[ 136.112313] irq 10: nobody cared (try booting with the "irqpoll" option) <4>[ 136.112349] Pid: 1258, comm: ifup-sysctl Not tainted 3.4.6-2.10-default #1 <4>[ 136.112365] Call Trace: <4>[ 136.112422] [<c0205359>] try_stack_unwind+0x199/0x1b0 <4>[ 136.112455] [<c02041d7>] dump_trace+0x47/0xf0 <4>[ 136.112479] [<c02053bb>] show_trace_log_lvl+0x4b/0x60 <4>[ 136.112501] [<c02053e8>] show_trace+0x18/0x20 <4>[ 136.112528] [<c067d77c>] dump_stack+0x6d/0x72 <4>[ 136.112562] [<c02ad5e1>] __report_bad_irq+0x21/0xc0 <4>[ 136.112586] [<c02ad8a0>] note_interrupt+0x180/0x1c0 <4>[ 136.112615] [<c02ab84c>] handle_irq_event_percpu+0x9c/0x1e0 <4>[ 136.112640] [<c02ab9be>] handle_irq_event+0x2e/0x50 <4>[ 136.112664] [<c02add96>] handle_level_irq+0x56/0x90 <4>[ 136.112685] [<c0204178>] handle_irq+0x88/0xa0 <3>[ 136.112705] handlers: <3>[ 136.112845] [<e0dccd00>] ata_bmdma_interrupt <0>[ 136.112859] Disabling IRQ #10 If you can NOT see the above messages in boot.msg, means hard drive have DMA problem with promise card. Then, does it possible remove SAMSUNG SP0822N (sdb) and remove libata.dma parameter and test? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.