https://bugzilla.suse.com/show_bug.cgi?id=1200710 Bug ID: 1200710 Summary: dracut-initqueue[581]: mount.nfs: No such device Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: dracut-maintainers@suse.de Reporter: schwab@suse.de QA Contact: qa-bugs@suse.de Found By: --- Blocker: --- This appears to be a missing synchronisation with NFS root: [ 10.481118][ T371] mmc_spi spi1.0: SD/MMC host mmc0, no DMA, no WP, no poweroff [ 10.518721][ T17] mmc0: host does not support reading read-only switch, assuming write-enable [ 10.526746][ T17] mmc0: new SDHC card on SPI [ 10.528219][ T368] macb 10090000.ethernet: Registered clk switch 'sifive-gemgxl-mgmt' [ 10.539131][ T368] macb 10090000.ethernet: GEM doesn't support hardware ptp. [ 10.608768][ T373] mmcblk0: mmc0:0000 SD32G 29.9 GiB [ 10.643933][ T373] mmcblk0: p1 p2 p3 p4 p5 [ 10.659954][ T399] MACsec IEEE 802.1AE [ 10.751273][ T368] macb 10090000.ethernet eth0: Cadence GEM rev 0x10070109 at 0x10090000 irq 16 (70:b3:d5:92:f1:07) [ 12.570426][ T441] macb 10090000.ethernet eth0: PHY [10090000.ethernet-ffffffff:00] driver [Microsemi VSC8541 SyncE] (irq=POLL) [ 12.581251][ T441] macb 10090000.ethernet eth0: configuring for phy/gmii link mode [ 16.151411][ T17] macb 10090000.ethernet eth0: Link is Up - 1Gbps/Full - flow control tx [ 16.158934][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.196121] dracut-initqueue[548]: wicked: eth0: Request to acquire DHCPv4 lease with UUID 8a5a9562-2808-0600-2402-000001000000 [ 16.413613][ T549] NET: Registered PF_PACKET protocol family [ 17.110211] dracut-initqueue[548]: wicked: eth0: Committed DHCPv4 lease with address 10.168.4.88 (lease time 1296000 sec, renew in 648000 sec, rebind in 1134000 sec) [ 17.747339][ T582] FS-Cache: Loaded [ 17.939969] dracut-initqueue[581]: mount.nfs: No such device [ 18.855132] dracut-initqueue[602]: mount.nfs: No such device [ 179.792006] dracut-initqueue[384]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 179.797072] dracut-initqueue[384]: Warning: /lib/dracut/hooks/initqueue/finished/nfsroot.sh: "[ -e $NEWROOT/proc ]" [ 179.804241] dracut-initqueue[384]: Warning: dracut-initqueue: starting timeout scripts The only dracut related updates were dracut-kiwi-lib and dracut-kiwi-oem-repart. -- You are receiving this mail because: You are on the CC list for the bug.