http://bugzilla.novell.com/show_bug.cgi?id=612910 http://bugzilla.novell.com/show_bug.cgi?id=612910#c4 --- Comment #4 from Michael Schmidt <MSchmidt_glz@gmx.de> 2010-06-13 09:47:39 UTC --- OK, EasyTune5 says: VCORE = 1,340 +3,3V = 3,34 +12V = 12,230 EasyTune6 says: CPU = 1,344 DRAM = 1,488 +3,3V = 3,344 +12V = 12,175 BIOS: VCORE = 1,344 V DDR3 1,5V = 1,488 V +3,3V = 3,312 V +12V = 12,239 V If I change the setting "System Voltage Control" to manual, I get additional Value (by setting normal for all Values): CPU PLL Voltage Control 2,500 V DRAM Voltage Control 1,500 V DDR VTT Voltage Control 0,750 V NB Voltage Control 1,300 V SidePort Mem Volt Control 1,600 V NB/PCIe/PLL Voltage Control 1,800 V Normal CPU Core 1,3500 V The it87 is loaded. sensors says: k10temp-pci-00c3 Adapter: PCI adapter temp1: +34.9°C (high = +70.0°C, crit = +81.0°C) it8720-isa-0228 Adapter: ISA adapter in0: +1.07 V (min = +0.00 V, max = +4.08 V) in1: +1.49 V (min = +0.00 V, max = +4.08 V) in2: +3.31 V (min = +0.00 V, max = +4.08 V) in3: +2.99 V (min = +0.00 V, max = +4.08 V) in4: +3.09 V (min = +0.00 V, max = +4.08 V) in5: +1.97 V (min = +0.00 V, max = +4.08 V) in6: +4.08 V (min = +0.00 V, max = +4.08 V) in7: +2.16 V (min = +0.00 V, max = +4.08 V) Vbat: +3.23 V fan1: 1776 RPM (min = 10 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 3139 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) temp1: +43.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: +32.0°C (low = +127.0°C, high = +70.0°C) sensor = thermal diode temp3: +36.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +0.413 V -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.