https://bugzilla.novell.com/show_bug.cgi?id=308323#c1 Summary: DVB-T Receiver Twinhan MagicBox cannot tune with Kernel 2.6.18 Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: openSUSE 10.2 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: hss@suhle.de QAContact: qa@suse.de Found By: --- The Receiver Firmware loads correctly: Sep 6 19:09:07 fernseher kernel: usb 1-1: new full speed USB device using uhci_hcd and address 9 Sep 6 19:09:07 fernseher kernel: usb 1-1: new device found, idVendor=1822, idProduct=3201 Sep 6 19:09:07 fernseher kernel: usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0 Sep 6 19:09:07 fernseher kernel: usb 1-1: configuration #1 chosen from 1 choice Sep 6 19:09:07 fernseher kernel: dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in cold state, will try to load a firmware Sep 6 19:09:07 fernseher kernel: dvb-usb: downloading firmware from file 'dvb-usb-dibusb-5.0.0.11.fw' Sep 6 19:09:08 fernseher kernel: usbcore: registered new driver dvb_usb_dibusb_mb Sep 6 19:09:08 fernseher kernel: usb 1-1: USB disconnect, address 9 Sep 6 19:09:08 fernseher kernel: dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. Sep 6 19:09:09 fernseher kernel: usb 1-1: new full speed USB device using uhci_hcd and address 10 Sep 6 19:09:10 fernseher kernel: usb 1-1: new device found, idVendor=1822, idProduct=3202 Sep 6 19:09:10 fernseher kernel: usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 Sep 6 19:09:10 fernseher kernel: usb 1-1: Product: VP7041 Sep 6 19:09:10 fernseher kernel: usb 1-1: Manufacturer: TwinHan Sep 6 19:09:10 fernseher kernel: usb 1-1: configuration #1 chosen from 1 choice Sep 6 19:09:10 fernseher kernel: dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state. Sep 6 19:09:10 fernseher kernel: dvb-usb: will use the device's hardware PID filter (table count: 16). Sep 6 19:09:10 fernseher kernel: DVB: registering new adapter (TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device). Sep 6 19:09:10 fernseher kernel: DVB: registering frontend 0 (DiBcom 3000M-B DVB-T)... Sep 6 19:09:10 fernseher kernel: dibusb: This device has the Thomson Cable onboard. Which is default. Sep 6 19:09:10 fernseher kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input3 Sep 6 19:09:10 fernseher kernel: dvb-usb: schedule remote query interval to 150 msecs. Sep 6 19:09:10 fernseher kernel: dvb-usb: TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and connected. Nevertheless, tuning is impossible:
tune to: 177500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: >>> tuning failed!!!
Responsible is one of the required modules. The bug is known to be existent with kernel 2.6.18 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.