http://bugzilla.novell.com/show_bug.cgi?id=564290 http://bugzilla.novell.com/show_bug.cgi?id=564290#c2 Bodo Wlaka <bodow@snafu.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |bodow@snafu.de --- Comment #2 from Bodo Wlaka <bodow@snafu.de> 2010-04-20 10:33:25 UTC --- This is not a hardware problem. I have a Lenovo SL 500 and have the same problem with the hardware-detection of the Touchpad an the Trackpoint under 11.2. With 11.1 everything works fine. Sometimes after booting everything is okay and after a reboot there is no Trackpoint/Touchpad detected. But i do not concern, that the problem is hal. I looked in my system and see hal etc. is installed in December and i know, that everything works in January. I made a little bit investigation and wrote the output of lshal, lsmod, lsusb, hwinfo and lspci in a file (working and not working). The difference in hal is that there are some devices not detected if Trackpoint/Touchpad is not working. These devices are: info.product = 'i8042 AUX3 port' (string) info.product = 'SynPS/2 Synaptics TouchPad' (string) info.product = 'Synaptics pass-through' (string) info.product = 'TPPS/2 IBM TrackPoint' (string) info.product = 'i8042 AUX2 port' (string) info.product = 'i8042 AUX1 port' (string) info.product = 'i8042 AUX0 port' (string) info.product = 'R5C843 MMC Host Controller' (string) No difference in lspci. In lsmod is a difference, the modules ricoh_mmc and serio_raw will not be loaded if the devices are not detected. Should i make a new report or should this be re-open? My system is 11.2 64-bit. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.