http://bugzilla.novell.com/show_bug.cgi?id=628698 http://bugzilla.novell.com/show_bug.cgi?id=628698#c0 Summary: [cups-drivers-splix] problems with CLP-315 printer Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Printing AssignedTo: jsmeix@novell.com ReportedBy: af1n@o2.pl QAContact: jsmeix@novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.6) Gecko/20100626 SUSE/3.6.6-1.2 Firefox/3.6.6 There are 2 problems: 1. Please enable J-BIG compression in Splix "SpliX J-BIG compression algorithm has been disabled during the compilation. Please recompile SpliX and enable the J-BIG compression algorithm." 2. Cups is looking for cms profile in: /usr/share/cups/model/samsung/cms/CLP-300cms but the current path in opensuse for this file is: /usr/share/cups/model/Samsung/cms/CLP-300cms If i don't link: ln -s /usr/share/cups/model/Samsung /usr/share/cups/model/samsung i get the following error: "SpliX Cannot open CMS file /usr/share/cups/model/samsung/cms/CLP-300cms (2)" There is actually a third problem... Neither cups nor Yast doesn't detect this printer. I had to go around this problem using URL based discovery parallel:/dev/usb/lp0. There is also a problem with udev, it keeps the permissions of /dev/usb/lp0 as crw-rw---- 1 root users 180, 0 2010-08-05 14:48 /dev/usb/lp0 and cups cannot access it, i get the following error from cups: "Unable to open device file "/dev/usb/lp0": Permission denied" When i change the rights using: chmod a+rwx /dev/usb/lp0 Then cups starts to display the J-BIG error and cms errors :) Reproducible: Always Steps to Reproduce: 1. zypper install cups-drivers-splix 2. plug in the printer 3. do: chmod a+rwx /dev/usb/lp0 4. do: ln -s /usr/share/cups/model/Samsung /usr/share/cups/model/samsung 5. add the printer to cups using parallel:/dev/usb/lp0 6. print a test page Actual Results: A nice set of cups errors, like: - "SpliX J-BIG compression algorithm has been disabled during the compilation" - "SpliX Cannot open CMS file /usr/share/cups/model/samsung/cms/CLP-300cms (2)" - "Unable to open device file "/dev/usb/lp0": Permission denied" Expected Results: A nice colorful test painted by the printer. I get the following errors in dmesg after connecting the printer: [860262.191049] usb 1-3: new high speed USB device using ehci_hcd and address 55 [860262.246967] hub 1-0:1.0: unable to enumerate USB device on port 3 [860262.456106] usb 1-3: new high speed USB device using ehci_hcd and address 56 [860262.511347] hub 1-0:1.0: unable to enumerate USB device on port 3 [860262.721068] usb 1-3: new high speed USB device using ehci_hcd and address 57 [860262.776353] hub 1-0:1.0: unable to enumerate USB device on port 3 [860262.986397] usb 1-3: new high speed USB device using ehci_hcd and address 58 [860263.041601] hub 1-0:1.0: unable to enumerate USB device on port 3 [860263.251342] usb 1-3: new high speed USB device using ehci_hcd and address 59 [860263.306627] hub 1-0:1.0: unable to enumerate USB device on port 3 [860263.516283] usb 1-3: new high speed USB device using ehci_hcd and address 60 [860263.571606] hub 1-0:1.0: unable to enumerate USB device on port 3 [860263.781360] usb 1-3: new high speed USB device using ehci_hcd and address 61 [860263.836594] hub 1-0:1.0: unable to enumerate USB device on port 3 [860264.046309] usb 1-3: new high speed USB device using ehci_hcd and address 62 [860264.102591] hub 1-0:1.0: unable to enumerate USB device on port 3 [860264.313138] usb 1-3: new high speed USB device using ehci_hcd and address 63 [860264.827040] usb 1-3: device not accepting address 63, error -71 [860264.929093] usb 1-3: new high speed USB device using ehci_hcd and address 64 [860264.984419] hub 1-0:1.0: unable to enumerate USB device on port 3 [860265.194049] usb 1-3: new high speed USB device using ehci_hcd and address 65 [860265.321862] usb 1-3: device descriptor read/all, error -71 [860265.424077] usb 1-3: new high speed USB device using ehci_hcd and address 66 [860265.940064] usb 1-3: device not accepting address 66, error -71 [860266.042074] usb 1-3: new high speed USB device using ehci_hcd and address 67 [860266.068997] usb 1-3: device descriptor read/8, error -71 [860266.195364] usb 1-3: device descriptor read/8, error -71 [860266.399067] usb 1-3: new high speed USB device using ehci_hcd and address 68 [860266.425496] usb 1-3: device descriptor read/all, error -71 [860266.426344] hub 1-0:1.0: unable to enumerate USB device on port 3 [860266.667089] usb 4-1: new full speed USB device using uhci_hcd and address 33 [860266.801115] usb 4-1: not running at top speed; connect to a high speed hub [860266.834120] usb 4-1: New USB device found, idVendor=04e8, idProduct=328e [860266.834129] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [860266.834135] usb 4-1: Product: CLP-310 Series [860266.834140] usb 4-1: Manufacturer: Samsung Electronics Co., Ltd. [860266.834144] usb 4-1: SerialNumber: 1434BAGQ700024P [860266.842212] usblp0: USB Bidirectional printer dev 33 if 0 alt 0 proto 2 vid 0x04E8 pid 0x328E Output from lsusb: 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 can't get debug descriptor: Connection timed out cannot read device status, Connection timed out (110) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.