https://bugzilla.novell.com/show_bug.cgi?id=845923 https://bugzilla.novell.com/show_bug.cgi?id=845923#c7 --- Comment #7 from Stakanov Schufter <stakanov@freenet.de> 2014-02-04 12:02:58 UTC --- I confirm this problem with 4.11.5 and phonon, independently of the backend for phonon used (vlc or gstreamer). My settings: Lenovo X201 with an ultrabase X200 and a Medion HDMI monitor. The soundcard is correctly installed and recognized in yast. HDMI is correctly installed (but not visible in yast, no matter what) and is working through ultrabase. There is a huge list of output devices. Duplex stereo analog Internal Audio Stereo Analog Digital Stereo HDMI output + Analog Stereo Input Digital Stereo HDMI output Analogical Stereo input Off Now, it seams that following applies: You run one user only on the system, you set in configuration the audio device. The normal stereo analog output works and appears in phonon as a choice together with HDMI. If you have instead more user running on the system (parallel sessions of KDE) the phonon support for audio is completely broken. HDMI is always selected and the rest is grayed out. Settings are not retained and if you find in configuration audio the Internal Audio Stereo Analog selectable, it will not make any difference. You will select it, but the audio still will be HDMI no matter what phonon says. If you join a Logitech notebook video-camera on usb, the video microphone will be set as output device, no matter what but the output will be greyed out and the output will be HDMI. While all this occurs, the audio card in yast that is recognized is rightly the internal audio card. However the audio device HDMI and Logitech are NOT recognized by yast. Nevertheless audio recognition for the Lenovo ultrabase did fail in origin and had to be corrected by hand, setting the "model" to "thinkpad". Only after this manual intervention the audio card would work with the ultrabase. Otherwise it was mute on the ultrabase, functional on the notebook. Prior: at 12.2 it was possible, to use internal stereo output only. If you plugged in an earphone in the laptop earphone adapter the audio was correctly switched. HDMI of the monitor was not recognized, nor functional. The audiocard was recognized correctly right from the scratch. With 12.3 HDMI was suddenly on with both, the speakers of the ultra-base output AND the HDMI speakers of the monitor in the same moment. (Nice sound, not a nuisance). However the output on headphone was not more functional for usb headphone and jack earphone of the notebook did also not work anymore. If you would use the posterior audio plug of the ultra-base, this would give the desired switch of function with switch off of audio main and switch to headphones. Now in 13.1 this is all gone. All this seams to be a KDE issue and phonon one HOWEVER, I had following case: Opensuse 13.1, soundcard Creative Audigy FX 5.1 and an Asus Mainboard M4A78LT-M LE The issue was: audio not recognized in yast. When recognized as intel HD audio and setting lags to 3 works flawlessly. But on every reboot, the card "vanished" and was not usable. So I had to take it off. Sound with this Mainboard remains troublesome. The latter could be related or not, unfortunately I can post you only the output of terminal of the notebook (which I have currently under hand). Output of lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 02:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) As the PC has at times also troubles to shut down after shutting down all users (reported by me as bug 855115) maybe this could be connected to the HDMI functionality? Just a thought. Greetings. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.