https://bugzilla.novell.com/show_bug.cgi?id=775746 https://bugzilla.novell.com/show_bug.cgi?id=775746#c2 --- Comment #2 from John Langley <j.langley@gmx.net> 2012-08-19 23:32:07 UTC --- Since my previous comment everthing works well. No problems on boot. But today my dmesg log showed this: [43299.808066] ata2: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1 [43299.808076] ata2: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0 [43299.808086] ata2: ATA_REG 0x40 ERR_REG 0x0 [43299.808090] ata2: tag : dhfis dmafis sdbfis sactive [43299.808096] ata2: tag 0x0: 1 1 0 1 [43299.808114] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [43299.808123] ata2.00: failed command: WRITE FPDMA QUEUED [43299.808137] ata2.00: cmd 61/01:00:e8:2f:20/00:00:05:00:00/40 tag 0 ncq 512 out [43299.808146] ata2.00: status: { DRDY } [43299.808156] ata2: hard resetting link [43299.808160] ata2: nv: skipping hardreset on occupied port [43300.262069] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [43300.265222] ata2.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [43300.265232] ata2.00: revalidation failed (errno=-5) [43305.262059] ata2: hard resetting link [43305.262068] ata2: nv: skipping hardreset on occupied port [43305.716090] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [43305.723383] ata2.00: configured for UDMA/133 [43305.723395] ata2.00: device reported invalid CHS sector 0 [43305.723409] ata2: EH complete [50448.736069] ata1: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1 [50448.736079] ata1: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0 [50448.736090] ata1: ATA_REG 0x40 ERR_REG 0x0 [50448.736094] ata1: tag : dhfis dmafis sdbfis sactive [50448.736099] ata1: tag 0x0: 1 1 0 1 [50448.736118] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [50448.736127] ata1.00: failed command: WRITE FPDMA QUEUED [50448.736141] ata1.00: cmd 61/01:00:e8:2f:20/00:00:05:00:00/40 tag 0 ncq 512 out [50448.736150] ata1.00: status: { DRDY } [50448.736160] ata1: hard resetting link [50448.736164] ata1: nv: skipping hardreset on occupied port [50449.190060] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [50449.193226] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [50449.193237] ata1.00: revalidation failed (errno=-5) [50454.190038] ata1: hard resetting link [50454.190043] ata1: nv: skipping hardreset on occupied port [50454.644053] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [50454.650338] ata1.00: configured for UDMA/133 [50454.650352] ata1: EH complete -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.